Experimental investigation of novel pre-tightened teeth connection technique for composite tube |
Li, Fei
(Institute of Logistics Engineering of PLA)
Zhao, Qilin (School of Mechanical and Power Engineering, Nanjing University of Technology) Chen, Haosen (Institute of Advanced Structure Technology, Beijing Institute of Technology) Xu, Longxing (The First Research Division, General Equipment Department of the PLA) |
1 | Chen, X. (2004), Handbook of polymer matrix composite; Chemical Industry Press. |
2 | Cheng, J.C. and Li, G. (2008), "Stress analyses of smart pipe joint integrated with piezoelectric composite layers under torsion loading", Int. J. Solids Struct., 45(6), 1153-1178. DOI |
3 | Das, R.R. and Pradhan, B. (2014), "Delamination damage analysis of laminated bonded tubular single lap joint made of fiberreinforced polymer composite", Int. J. Damage Mech., 23(8), 772-790. DOI |
4 | Deng, A.Z., Zhao, Q.L., Li, F. and Chen, H. (2013), "Research on bearing capacity of single tooth to composite pre-tightened teeth connection", J. Reinf. Plast. Comp., 32(5), 1603-1613. DOI |
5 | Esmaeili, F., Chakherlou, T.N. and Zehsaz, M. (2014), "Investigation of bolt clamping force on the fatigue life of double lap simple bolted and hybrid (bolted/bonded) joints via experimental and numerical analysis", Eng. Fail. Anal., 45(4), 406-420. DOI |
6 | Gamdania, F., Boukhilia, R. and Vadeana, A. (2015), "Tensile strength of open-hole, pin-loaded and multi-bolted single-lap joints in woven composite plates", Mater. Des., 88(5), 702-712. DOI |
7 | Girao Coelho, A.M. and Mottram, J.T. (2015), "A review of the behaviour and analysis of bolted connections and joints in pultruded fibre reinforced polymers", Mater. Des., 74(10), 86- 107. DOI |
8 | Hosseinzadeh, R. and Taheri, F. (2009), "Non-linear investigation of overlap length effect on torsional capacity of tubular adhesively bonded joints", Compos. Struct., 91(8), 186-195. DOI |
9 | Huang, W., Fenu, L., Chen, B. and Briseghella, B. (2015), "Experimental study on K-joints of concrete-filled steel tubular truss structures", J. Constr. Steel Res., 107(2), 182-193. DOI |
10 | Ju, S., Jiang, D.Z., Shenoi, R.A. and Xiao, J.Y. (2011), "Flexural properties of lightweight FRP composite truss structures", J. Compos. Mater., 39(5), 1921-1930. |
11 | Li, F., Zhao, Q.L., Chen, H.S., Wang, J.Q. and Duan, J.H. (2010), "Prediction of tensile capacity based on cohesive zone model of bond anchorage for fiber-reinforced polymer tendon", Compos. Struct., 92(4), 2400-2405. DOI |
12 | Karakuzu, R., Taylak, N., İcten, B.M. and Aktas, M. (2008), "Effects of geometric parameters on failure behavior in laminated composite plates with two parallel pin-loaded holes", Compos. Struct., 85(1), 1-9. DOI |
13 | Kinloch, A.J. (1994), Adhesion and Adhesives: Science and Technology, (Reprinted), Chapman & Hall, London, UK. |
14 | Li, G., Torres, S., Alaywan, W. and Abadie, C. (2005), "Experimental study of FRP tube-encased concrete columns", J. Compos. Mater., 39(2), 1131-1145. DOI |
15 | Nemes, O., Lachaud, F. and Mojtabi, A. (2006), "A contribution to the study of cylindrical adhesive joining", Int. J. Adhes. Adhes., 26(2), 474-480. DOI |
16 | Oh, J.-H. (2007), "Nonlinear analysis of adhesively bonded tubular single-lap joints for composites in torsion", Compos. Sci. Technol., 55(8), 245-260. |
17 | Prachasaree, W., Gangarao, H.V.S. and Shekar, V. (2009), "Performance evaluation of FRP bridge deck under shear loads", J. Compos. Mater., 43(3), 377-395. DOI |
18 | Ucsnik, S., Scheerer, M., Zaremba, S. and Pahrd, D.H. (2010), "Experimental investigation of a novel hybrid metal-composite joining technology", Compos. Part A, 41(6), 369-374. DOI |
19 | Scarselli, G., Castorini, E., Panella, F.W., Nobile, R. and Maffezzoli, A. (2015), "Structural behaviour modelling of bolted joints in composite laminates subjected to cyclic loading", Aerosp. Sci. Technol., 53(9), 213-221. |
20 | Starikov, R. and Schon, J. (2001), "Quasi-static behavior of composite joints with protruding-head bolts", Compos. Struct., 51(4), 411-425. DOI |
21 | Wei, X. and Li, G. (2010), "Finite difference three-dimensional solution of stresses in adhesively bonded composite tubular joint subjected to torsion", Int. J. Adhes. Adhes., 30(7), 191-199. DOI |
22 | Rosales-Iriarte, F., Fellows, N.A. and Durodola, J.F. (2011), "Experimental evaluation of the effect of clamping force and hole clearance on carbon composites subjected to bearing versus bypass loading", Compos Struct, 93(7), 1096-1102. DOI |