Browse > Article
http://dx.doi.org/10.12989/scs.2017.23.1.031

Multi-response optimization of crashworthiness parameters of bi-tubular structures  

Vinayagar, K. (Department of Mechanical Engineering, Sethu Institute of Technology)
Kumar, A. Senthil (Department of Mechanical Engineering, Sethu Institute of Technology)
Publication Information
Steel and Composite Structures / v.23, no.1, 2017 , pp. 31-40 More about this Journal
Abstract
This article aims at presenting multi objective optimization of parameters that affect crashworthiness characteristics of bi-tubular structures using Taguchi method with grey relational analysis. To design the experiments, the $L_9$ orthogonal array has been used and based on that, the inner tubes have been fabricated by varying the three influence factors such as reference diameter, length difference and numbers of sides of the polygon with three levels, but all the outer cylinders have the same diameter and length 90 mm and 135 mm respectively. Then, the tailor made bi-tubular steel structures were subjected into quasi static axial compression. From the test results it is found that the crushing behaviors of bi-tubular structures with different combinations were fairly significant. The important responses (crashworthiness indicators) specific energy absorption and crush force efficiency have been evaluated from load - displacement curve. Finally optimal levels of parameters were identified using grey relational analysis, and significance of parameters was determined by analysis of variance. The optimum crashworthiness parameters are reference diameter 80 mm, length difference 0 mm and number of sides of polygon is 3, i.e., triangle within the selected nine bi-tube combinations.
Keywords
bi-tubular structures; grey relational analysis; crashworthiness; specific energy absorption; crush force efficiency;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Abramowicz, W. and Jones, N. (1986), "Dynamic progressive buckling of circular and square tubes", Int. J. Impact Eng., 4(4), 243-270.   DOI
2 Abramowicz, W. and Wierzbicki, T. (1989), "Axial crushing of multi corner sheet metal columns", J. Appl. Mech., 56(1), 113-120.   DOI
3 Alavi Nia, A. and Hamedani, J.H. (2010), "Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries extrusions", Thin-Wall. Struct., 48 (12), 946-954.   DOI
4 Alavi Nia, A. and Parsapour, M. (2014), "Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections", Thin-Wall. Struct., 74, 155-165.   DOI
5 Alexander, J.M. (1960), "An approximate analysis of the collapse of thin cylindrical shells under axial loading", Q. J. Mech. Appl. Math., 13(1), 10-15.   DOI
6 Andrews, K.R.F., England, G.L. and Ghani, E. (1983), "Classification of the axial collapse of cylindrical tubes under quasi-static loading", Int. J. Mech. Sci., 25(9-10), 687-696.   DOI
7 Hsu, S.S. and Jones, N. (2004), "Quasi-static and dynamic axial crushing of thin-walled circular stainless steel, mild steel and aluminium alloy tubes", Int. J. Crash Worthiness, 9(2), 195-217.   DOI
8 Hong, W., Jin, F., Zhou, J., Xia, Z., Xu, Z., Yang, L., Zheng, Q. and Fan, H. (2013), "Quasi-static axial compression of triangular steel tubes", Thin-Wall. Struct., 62, 10-17.   DOI
9 Hong, W., Fan, H., Xia, Z., Jin, F., Zhou, Q. and Fang, D. (2014), "Axial crushing behaviors of multi-cell tubes with triangular lattices", Int. J. Impact Eng., 63, 106-117.   DOI
10 Hou, S., Li, Q., Long, S., Yang, X. and Li, W. (2009), "Crash worthiness design for foam filled thin - wall structures", Mater. Des., 30(6), 2024-2032.   DOI
11 Johnson, W. and Soden, P.D. (1977), "In extensional collapse of thin-walled tubes under axial compression", J. Strain Anal., 12(4), 317-330.   DOI
12 Mou, H., Du, Y. and Zou, T. (2015), "Effects of different roll angles on civil aircraft fuselage crashworthiness", Adv. Aircraft Spacecraft Sci., 2(4), 391-401.   DOI
13 Pugsley, A.G. (1979), "On the crumpling of thin tubular structures", Q. J . Mech. Appl. Math., 32(1), 1-7.   DOI
14 Pugsley, S.A. and Macaulay, M. (1960), "The large-scale crumpling of thin cylindrical columns", Q. J. Appl. Math., 13(1), 1-9.   DOI
15 Rajendran, R., Prem Sai, K., Chandrasekar, B., Gokhale, A. and Basu, S. (2009), "Impact energy absorption of aluminium foam fitted AISI 304L stainless steel tube", Mater. Des., 30(5), 1777-1784.   DOI
16 Seitzberger, M., Rammerstorfer, F.G., Gradinger, R., Degischer, H.P., Blaimschein, M. and Walch, C. (2000), "Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam", Int. J. Solids Struct., 37(30), 4125-4147.   DOI
17 Zhang, Y., Sun, G.Y., Li, G.Y., Luo, Z. and Li, Q. (2012), "Optimization of foam-filled bitubal structures for crashworthiness criteria", Mater. Des., 38, 99-109.   DOI
18 Sharifi, S., Shakeri, M., Ebrahimi Fakhari, H. and Bodaghi, M. (2015), "Experimental investigation of bitubal circular energy absorbers under quasi-static axial load", Thin-Wall. Struct., 89, 42-53.   DOI
19 Velmurugan, R. and Muralikannan, R. (2009), "Energy absorption characteristics of annealed steel tubes of various cross sections in static and dynamic loading", Latin Am. J. Solids Struct., 6(4), 385-412.
20 Yin, H.F., Wen, G.L., Hou, S.J. and Chen, K. (2011), "Crushing analysis and multi objective crashworthiness optimization of honey comb-filled single and bitubular polygonal tubes", Mater. Des., 32(8-9), 4449-4460.   DOI
21 Zhou, Y., Lan, F. and Chen, J. (2011), "Crashworthiness research on S-shaped front rails made of steel-aluminum hybrid materials", Thin-Wall. Struct., 49(2), 291-297.   DOI