Short-time creep, fatigue and mechanical properties of 42CrMo4 - Low alloy structural steel |
Brnic, Josip
(Faculty of Engineering, University of Rijeka)
Canadija, Marko (Faculty of Engineering, University of Rijeka) Turkalj, Goran (Faculty of Engineering, University of Rijeka) Krscanski, Sanjin (Faculty of Engineering, University of Rijeka) Lanc, Domagoj (Faculty of Engineering, University of Rijeka) Brcic, Marino (Faculty of Engineering, University of Rijeka) Gao, Zeng (School of Materials Science and Engineering, Henan Polytechnic University) |
1 | Pollak, R.D. (2005), "Analysis of methods for determining high cycle fatigue strength of a material with investigation of Ti-6Al-4V gigacycle fatigue behavior", Disertation; Air Force Institute of Technology, Wright-Patterson Air Force Base, OH, USA. |
2 | Raghavan, V. (2004), Materials Science and Engineering, Prentice- Hall of India, New Delhi, India. |
3 | Stanczyk, M. and Figlus, T. (2014), "The influence of the hardening coolant on the properties of hot rolled bars of the steel 42CrMo4", Metalurgija, 53(4), 493-496. |
4 | Sturm, R., Grum, I. and Bozic, S. (2011), "Influence of the alloying elements in Al-Si alloys on the laser remelting process", Laser Eng., 22(1-2), 47-61. |
5 | Terres, M.A., Ben Mohamed, S. and Sidhom, H. (2010), "Influence of ion nitriding on fatigue strength of low-alloy (42CrMo4) steel: Experimental characterization and predictive approach", Int. J. Fatigue, 32(11), 1795-1804. DOI |
6 | Terres, M.A., Laalai, N. and Sidhom, H. (2012), "Effect of nitriding and shot-peening on the fatigue behavior of 42CrMo4 steel: Experimental analysis and predictive approach", Mater. Des., 35, 741-748. DOI |
7 | Annual Book of ASTM Standards (2015), Metals - Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, Vol. 03.01, ASTM International, Baltimore, MD, USA. |
8 | Bathe, K.J. (1996), Finite Element Procedure, Prentice-Hal, Inc., NJ, USA. |
9 | Brnic, J., Canadija, M., Turkalj, G. and Lanc, D. (2009), "Tool material behavior at elevated temperatures", Mater. Manuf. Process., 24(7-8), 758-762. DOI |
10 | Brnic, J., Canadija, M., Turkalj, G. and Lanc, D. (2010a), "Structural steel ASTM A709-behavior at uniaxial tests conducted at lowered and elevated temperatures, short-time creep response and fracture toughness calculation", J. Eng. Mech., 136(9), 1083-1089. DOI |
11 | Brnic, J., Turkalj, G., Niu, J., Canadija, M. and Lanc, D. (2013), "Analysis of experimental data on the behavior of Steel S275JR - Reliability of modern design", Mater. Des., 47, 497-594. DOI |
12 | Brnic, J., Canadija, M., Turkalj, G. and Lanc, D. (2010b), "50CrMo4 steel-determination of mechanical properties at lowered and elevated temperatures, creep behavior and fracture toughness calculation", J. Eng. Mater. Technol., 132(2), 021004-1-021004-6. DOI |
13 | Brnic, J., Turkalj, G., Canadija, M. and Lanc, D. (2011), "AISI 316Ti (1.4571) steel-mechanical, creep and fracture properties versus temperature", J. Constr. Steel Res., 67(12), 1948-1952. DOI |
14 | Brnic, J., Turkalj, G., Canadija, M., Lanc, D. and Krscanski, S. (2012), "Responses of austenitic stainless steel American Iron and Steel Institute (AISI) 303 (1.4305) subjected to different environmental conditions", J. Test. Eval., 40(2), 319-328. |
15 | Brnic, J., Turkalj, G., Lanc, D., Canadija, M., Brcic, M. and Vukelic, G. (2014d), "Comparison of material properties: Steel 20MnCr5 and similar steels", J. Construct. Steel Res., 95, 81-89. DOI |
16 | Brnic, J., Turkalj, G. and Canadija, M. (2014a), "Mechanical testing of the behavior of steel 1.7147 at different temperatures", Steel Compos. Struct., Int. J., 17(5) 549-560 DOI |
17 | Brnic, J., Turkalj, G., Canadija, M. and Niu, J. (2014b), "Experimental determination and prediction of the mechanical properties of steel 1.7225", Mater. Sci. Eng. A, 600, 47-52. DOI |
18 | Brnic, J., Turkalj, G., Krscanski, S., Lanc, L., Canadija, M. and Brcic, M. (2014c), "Information relevant for the design of structure: ferritic - heat resistant high chromium steel X10CrAlSi25", Mater. Des., 63, 508-518. DOI |
19 | Brooks, C.R. and Choudhury, A. (2002), Failure Analysis of Engineering Materials, McGraw - Hill, USA. |
20 | Brnic, J., Turkalj, G., Canadija, M., Krscanski, S., Brcic, M. and Lanc, D. (2015), "Deformation behavior and material properties of austenitic heat - Resistant Steel X15CrNiSi25-20 subjected to high temperatures and creep", Mater. Des., 69, 219-229. DOI |
21 | Cerny, I. and Sis, J. (2014), "Fatigue strength of laser hardened 42CrMo4 steel considering effects of compressive residual stresses on short crack growth", Procedia Eng., 74, 417-420. DOI |
22 | Collins, J.A. (1993), Failure of Materials in Mechanical Design, (2nd Ed.), John Wiley & Sons, New York, NY, USA. |
23 | Craig, R.R. Jr. (2011), Mechanics of Materials, (3rd Ed.), John Wiley & Sons, USA. |
24 | Goncza, P., Potocnik, R. and Glodez, S. (2010), "Fatigue behaviour of 42CrMo4 steel under contact loading", Procedia Eng., 2(1), 1991-1999. DOI |
25 | Draper, N.R. and Smith, H. (1998), Applied Regression Analysis, Wiley- Interscience Publications, USA. |
26 | Farahmand, B., Bockrath, G. and Glassco, J. (1997), Fatigue and Fracture Mechanics of High Risk Parts, Chapman & Hall, New York, NY, USA. |
27 | Findley, W.N., Lai, J. and Onaran, S.K. (1989), Creep and Relaxation of Nonlinear Viscoelastic Materials, Dover Publication, New York, NY, USA. |
28 | Herakovic, N. and Bevk, B. (2010), "Analysis of the material and the actuator influence on the characteristics of a pneumatic valve", Mater. Tehnologije, 44(1), 37-40. |
29 | ISO 12107:2012 (E) (2012), Metallic materials - Fatigue testing - Statistical planning and analysis of data. |
30 | Krewerth, D., Weidner, A. and Biermann, H. (2013), "Investigation of the damage behavior of cast steel 42CrMo4 during ultrasonic fatigue by combination of thermography and fractography", Adv. Eng. Mater., 15(12), Special Issue, 1251-1259. DOI |
31 | Milutinovic, M., Movrin, M. and Pepelnjak, T. (2012), "Theoretical and experimental investigation of cold hobbing processes in cases of cone-like punch manufacturing", Int. J. Adv. Manuf. Technol., 58(9-12), 895-906. DOI |
32 | Pepelnjak, T., Gantar, G. and Kuzman, K. (2001), "Numerical simulations in optimization of product and forming process", J. Mater. Process. Technol., 115(1) 122-126. DOI |
![]() |