1 |
ABAQUS/PRE (1997), User's Manual, Hibbit, Karlsson and Sorensen Inc.
|
2 |
AISC (2005), Manual of Steel Construction, (13th Ed.), American Institute of Steel Construction, Chicago, IL, USA.
|
3 |
ANSI/AISC 358-10 (2010), Prequalified connections for special and intermediate steel moment frames for seismic applications; American Institute of Steel Construction, Chicago, IL, USA.
|
4 |
ANSI/AISC 360-10 (2010), Specification for structural steel buildings; American Institute of Steel Construction, Chicago, IL, USA.
|
5 |
Bravo, M.A. and Herrera, R.A. (2014), "Performance under cyclic load of built-up T-stubs for Double T moment connections", Constructional Steel, 103, 117-130.
DOI
|
6 |
Coelho, A.G., Bijlaard, F.K., Gresnigt, N. and Simoes da Silva, L. (2004), "Experimental assessment of the behaviour of bolted T-stub connections made up of welded plates", Constructional Steel, 60(2), 269-311.
DOI
|
7 |
FEMA-350 (2000), Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, Federal Emergency Management Agency, Washington D.C., USA.
|
8 |
Francavilla, A.B., Latour, M., Piluso, V. and Rizzano, G. (2016), "Bolted T-stubs: A refined model for flange and bolt fracture modes", Steel Compos. Struct., Int. J., 20(2), 267-293.
DOI
|
9 |
Gerami, M., Saberi, H., Saberi, V. and Saedi Daryan, A. (2011), "Cyclic behavior of bolted connections with different arrangement of bolts", Constructional Steel, 67(4), 690-705.
DOI
|
10 |
Kulak, G.L., Fisher, J.W. and Struik, J.H. (1987), Guide to Design Criteria for Bolted and Riveted Joints, AISC, Chicago, IL, USA.
|
11 |
Latour, M., Piluso, V. and Rizzano, G. (2015), "Free from damage beam-to-column joints: Testing and design of DST connections with friction pads", Eng. Struct., 85, 219-233.
DOI
|
12 |
Pachoumis, D.T., Galoussis, E.G., Kalfas, C.N. and Christitsas, A.D. (2009), "Reduced beam section moment connections subjected to cyclic loading: Experimental analysis and FEM simulation", Eng. Struct., 31(1), 216-223.
DOI
|
13 |
Pachoumis, D.T., Galoussis, E.G., Kalfas, C.N. and Efthimiou, I.Z. (2010), "Cyclic performance of steel moment-resisting connections with reduced beam sections - Experimental analysis and finite element model simulation", Eng. Struct., 32(9), 2683-2692.
DOI
|
14 |
Piluso, V., Faella, C. and Rizzano, G. (2001a), "Ultimate behavior of bolted T-stubs - I. Theoretical model", J. Struct. Eng., 127(6), 686-693.
DOI
|
15 |
Piluso, V., Faella, C. and Rizzano, G. (2001b), "Ultimate behavior of bolted T-stubs - II. Model validation", J. Struct. Eng., 127(6), 694-704.
DOI
|
16 |
Piluso, V. and Rizzano, G. (2008), "Experimental analysis and modeling of bolted T-stubs under cyclic loads", Constructional Steel, 64(6), 655-669.
DOI
|
17 |
Popov, E. and Takhirov, S. (2002), "Bolted large seismic steel beam-to-column connections, part 1:experimental study", Eng. Struct., 24(12), 1523-1534.
DOI
|
18 |
Ricles, J.M., Zhang, X., Lu, L.W. and Fisher, J. (2004), Development of Seismic Guidelines for Deep-Column Steel Moment Connections, (ATLSS Report No. 04-13), National Center for Engineering Research on Advanced Technology for Large Structural Systems, Bethlehem, PA, USA.
|
19 |
SAC (2000), Seismic design criteria for new moment-resisting steel frame construction; FEMA 350, SAC Joint Venture, Sacramento, CA, USA.
|
20 |
Swanson, J.A. and Leon, R.T. (2000), "Bolted steel connection: Tests on T-stub components", J. Struct. Eng., 126(1), 50-60.
DOI
|
21 |
Zareia, A., Vaghefi, M. and Fiouz, A.R. (2016), "Numerical investigation seismic performance of rigid skewed beam-to-column connection with reduced beam section", Struct. Eng. Mech., Int. J., 57(3), 507-528.
DOI
|