Browse > Article
http://dx.doi.org/10.12989/scs.2016.21.3.517

Mechanical properties of material in Q345GJ-C thick steel plates  

Yang, Na (Beijing's Key Laboratory of Structural Wind Engineering and Urban Wind Environment, School of Civil Engineering, Beijing Jiaotong University)
Su, Chao (Hainanprovince Institute of Architectural Design)
Wang, Xiao-Feng (Beijing's Key Laboratory of Structural Wind Engineering and Urban Wind Environment, School of Civil Engineering, Beijing Jiaotong University)
Bai, Fan (Beijing's Key Laboratory of Structural Wind Engineering and Urban Wind Environment, School of Civil Engineering, Beijing Jiaotong University)
Publication Information
Steel and Composite Structures / v.21, no.3, 2016 , pp. 517-536 More about this Journal
Abstract
Thick steel plate is commonly found with mega steel structures but its properties have not been fully explored. Grade Q345GJ-C steel plate with thickness ranging from 60 mm to 120 mm are studied in this paper. Both the static and cyclic performance of material in different directions (horizontal and through-thickness directions) and locations (outer surface, 1/4 thickness and mid-depth) are experimentally obtained. The accumulative damage during cyclic loading is also calculated by using bilinear mixed hardening (BMH) constitutive relationship together with the Lemaitre's damage model. Results show that the static properties are better at the outer surface of thick steel plates than those at mid-depth. Properties in through-thickness direction are similar to those at mid-depth in the horizontal direction. The cyclic performance at different locations of a given plate is similar within the range of strain amplitude studied. However, when damage parameters identified from monotonic tensile tests are included in the numerical simulation of cyclic loading tests, damage is found accumulating faster at mid-depth than close to outer surface.
Keywords
thick steel plate; mechanical properties; cyclic response; material test; damage evolution; Lemaitre's model;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Hasegawa, H., Nakajima, K. and Mizoguchi, S. (2001), "In-situ' observation of phase transformation and MnS precipitation in Fe-Si alloys", Tetsu-to-Hagane (J. Iron Steel Inst. Jpn.), 87(6), 433-440.
2 Hodge, P.G. Jr. (1957), "Discussion on: A new method of analyzing stress and strain in work hardening plastic solids", J. Appl. Mech., 24, 482-484.
3 Kanazawa, S., Yamato, K. and Takashi, I. (1976), "On the assessment of the lamellar tearing susceptibility", J. Jpn. Weld. Soc., 45(3), 238-244. [In Japanese]   DOI
4 Kuwamura, H., Iyama, J. and Matsui, K. (2003), "Effects of material toughness and plate thickness on brittle fracture of steel members", J. Struct. Eng., 129(11), 1475-1483.   DOI
5 Lemaitre, J. (1985), "A continuous damage mechanics model for ductile fracture", J. Eng. Mater. Technol., 107(1), 83-89.   DOI
6 Lemaitre, J. and Chaboche, J.L. (1990), Mechanics of Solid Materials, Cambridge University Press.
7 Lemaitre, J., and Dufailly, J. (1987), "Damage measurements", Eng. Frac. Mech., 28(5), 643-661.   DOI
8 Li, Z.X., Jiang, F.F. and Tang, Y.Q. (2012), "Multi-scale analyses on seismic damage and progressive failure of steel structures", Finite Elem. Anal. Des., 48(1), 1358-1369.   DOI
9 Pirondi, A. and Bonora, N. (2003), "Modeling ductile damage under fully reversed cycling", Comput. Mater. Sci., 26, 129-141.   DOI
10 Prager, W. (1955), "The theory of plasticity: A survey of recent achievement", Proceedings of the Institute of Mechanical Engineers, 169(1), 41-57.   DOI
11 Radis, R. and Kozeschnik, E. (2010), "Concurrent precipitation of AlN and VN in microalloyed steel", Steel Res. Int., 81(8), 681-685.   DOI
12 Ramberg, W. and Osgood, W.R. (1943), "Description of stress-strain curves by three parameters", National Advisory Committee for Aeronautics, Washington, D.C., USA, NACA Technical Note 902.
13 Shi, G., Wang, M., Bai, Y., Wang, F., Shi, Y.J. and Wang, Y.Q. (2012), "Experimental and modeling study of high-strength structural steel under cyclic loading", Eng. Struct., 37, 1-13.   DOI
14 Standardization Administration of the People's Republic of China (SAPRC) (2010), "Metallic materials - tensile testing - part 1: method of test at room temperature", GB/T 228.1-2010, Beijing, China.
15 Su, M.Z., Gu, Q. and Guo, B. (2002), "Finite element analysis of steel members under cyclic loading", Finite Elem. Anal. Des., 39(1), 43-54.   DOI
16 Su, C., Yang, N., Wang, X.F. and Bai, F. (2014), "A metallic constitutive model considering damage evolution and bilinear mixed hardening", Proceedings of the 13th International Symposium on Structural Engineering, Hefei, China, October, pp. 978-985.
17 Takashi, I. (2004), "Lamellar tearing (Lecture for practical engineer)", J. Jpn. Weld. Soc., 73(2), 119-124. [In Japanese]   DOI
18 Wang, Y.Q., Zhou, H., Shi, Y.J., Chen, H. and Li, S.F. (2010), "A research review on mechanism and prevention of lamellar tearing in thick plate of steel structures", Prog. Steel Build. Struct., 12(5), 26-34. [In Chinese]
19 Wang, Y.Q., Hu, Z.W., Shi, Y.J., Zhou, H. and Chen, H. (2011b), "Study on brittle fracture of thick steel plate based on fracture toughness index (I) ---- classification method", Low Temp. Archit. Technol., 33(1), 1-4. [In Chinese]
20 Wang, Y.Q., Zhou, H., Hu, Z.W., Shi, Y.J. and Chen, H. (2011a), "Experimental analysis of mechanical properties of thick plate in steel structure at low temperature", J. Civ., Archit. & Environ. Eng., 33(5), 7-12. [In Chinese]
21 Wang, Y.Q., Hu, Z.W., Shi, Y.J., Zhou, H. and Chen, H. (2011c), "Study on brittle fracture of thick steel plate based on fracture toughness index (II) ---- selection method", Low Temp. Archit. Technol., 33(2), 1-4. [In Chinese]
22 Yang, N., Su. C., Wang, X.F. and Bai, F. (2016), "Research on damage evolution in thick steel plates", J. Const. Steel. Res., 122(2016), 213-225.   DOI
23 Zhang, Y. and Wu, Z.Y. (2011), "Mixed hardening constitutive model of steel considering damage evolution", J. Southeast Univ. (Nat. Sci. Ed.), 41(2), 331-335. [In Chinese]