Browse > Article
http://dx.doi.org/10.12989/scs.2015.19.4.995

Design optimization of spot welded structures to attain maximum strength  

Ertas, Ahmet H. (Department of Biomedical Engineering, Karabuk University)
Publication Information
Steel and Composite Structures / v.19, no.4, 2015 , pp. 995-1009 More about this Journal
Abstract
This study presents design optimization of spot welded structures to attain maximum strength by using the Nelder-Mead (Simplex) method. It is the main idea of the algorithm that the simulation run is executed several times to satisfy predefined convergence criteria and every run uses the starting points of the previous configurations. The material and size of the sheet plates are the pre-assigned parameters which do not change in the optimization cycle. Locations of the spot welds, on the other hand, are chosen to be design variables. In order to calculate the objective function, which is the maximum equivalent stress, ANSYS, general purpose finite element analysis software, is used. To obtain global optimum locations of spot welds a methodology is proposed by modifying the Nelder-Mead (Simplex) method. The procedure is applied to a number of representative problems to demonstrate the validity and effectiveness of the proposed method. It is shown that it is possible to obtain the global optimum values without stacking local minimum ones by using proposed methodology.
Keywords
optimal design; spot weld; Finite Element Analysis (FEA); modified Nelder-Mead (Simplex) method; mechanical strength;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Adib, H., Gilgert, J. and Pluvinage, G. (2004), "Fatigue life duration prediction for welded spots by volumetric method", Int. J. Fatigue, 26(1), 81-94.   DOI
2 Bae, D.H., Sohn, I.S. and Hong, J.K. (2003), "Assessing the effects of residual stresses on the fatigue strength of spot welds", Weld. J. Res. Suppl., 82(1), 18-23.
3 D'lppolito, R., Raniolo, R., Olivero, M., Meneguzzo, M., Puelo, V., Donders, S. and Hack, M. (2009), "Multi-disciplinary optimization of a vehicle spot weld layout under durability and NVH constraints", Noise Vib. Bull., 10, 79-90.
4 Davidson, J.A. and Imhof, E.J. (1983), "A fracture-mechanics and system-stiffness approach to fatigue performance of spot-welded sheet steels", Technical Paper; SAE International (The Engineering Resource for Advancing Mobility), Detroit, MI, USA.
5 Di Fant-Jaeckels, H. and Galtier, A. (2000), "Fatigue lifetime prediction model for spot welded structures", La Revue de Metallurgie-CIT, 1, 83-95.
6 Ertas, A.H. and Sonmez, F.O. (2009), "Optimization of spot-weld joints", P.I. Mech. Eng. C-J. Mech., 223(3), 545-555.   DOI
7 Ertas, A.H. and Sonmez, F.O. (2011), "Design optimization of spot-welded plates for maximum fatigue life", Finite Elem. Anal. Des., 47(4), 413-423.   DOI
8 Ertas, A.H., Vardar, O., Sonmez, F.O. and Solim, Z. (2009), "Measurement and assessment of fatigue life of spot-weld joints", J. Eng. Mater.-T. ASME, 131(1), 011011.   DOI
9 Fang, J., Gao, Y., Sun, G., Xu, C., Zhang, Y. and Li, Q. (2014), "Optimization of spotwelded joints combined artificial bee colony algorithm with sequential kriging optimization", Adv. Mech. Eng., 6, 573694.
10 Gean, A., Westgate, S.A., Kucza, J.C. and Ehrstrom, J.C. (1999), "Static and fatigue behavior of spot-welded 5182-O Aluminum alloy sheet", Weld. J. Res. Suppl., 78, 90-96.
11 Grujicic, M., Arakere, A., Sellappan, V., Ziegert, J.C., Kocer, F.Y. and Schmueser, D. (2009), "Multidisciplinary design optimization of a composite car door for structural performance, NVH, crashwortiness, durability and manufacturability", Multidiscip. Model. Mater. Struct., 5(1), 1-28.   DOI
12 Haftka, R.T. and Gurdal, Z. (1992), Elements of Structural Optimization, Kluwer Academic Publishers, USA.
13 Jie, X. (2010), "Research on optimization of car body spot weld layout", Master's Thesis Dissertation, Chongqing University of Technology, Chongqing, China.
14 Kang, H., Barkey, M.E. and Lee, Y. (2000), "Evaluation of multi-axial spot weld fatigue parameters for proportional loading", Int. J. Fatig., 22(8), 691-702.   DOI
15 Lee, H., Kim, N. and Lee, T.S. (2004), "Overload failure curve and fatigue behavior of spot-welded specimens", Eng. Fract. Mech., 72(8), 1203-1221.   DOI
16 Linder, J. and Melander, A. (1998), "Fatigue strength of spot welded stainless sheet steels exposed to 3% NaCl solution", Int. J. Fatigue, 20(5), 383-388.   DOI
17 Newman, J.A. and Dowling, N.E. (1998), "A crack growth approach to life prediction of spot-welded lap joints", Fatigue Fract. Eng. M., 21, 1123-1132.   DOI
18 Matsoukas, G., Steven, G.P. and Mai, Y.W. (1984), "Fatigue of spot-welded lap joints", Int. J. Fatigue, 6(1), 55-57.   DOI
19 Mundo, D., Hadjit, R., Donders, S., Brughmans, M. and Desmet, W. (2009), "Simplified modelling of joints and beam-like structures for BIW optimization in a concept phase of the the vehicle design process", Finite Elem. Anal. Des., 45(6-7), 456-462.   DOI
20 Nelder, J.A. and Mead, R. (1965), "A simplex method for function minimization", Computer J., 7(4), 308-313.   DOI
21 Pakalapati, V., Katkar, V. and Babar, R. (2011), "CAE based 'Multi objective optimization approach for spot weld connections layout' in automotive structure", SAE Technical Paper; 2011-01-0794.
22 Pan, N. and Sheppard, S. (2002), "Spot welds fatigue life prediction with cyclic strain range", Int. J. Fatigue, 24, 519-528.   DOI
23 Perez, M., Calvo, R. and Hirschbeck, B. (2013), "BIW optimization by means of an automated CAE process for the reduction of welding points", Proceedings of the FISITA 2012 World Automotive Congress: Lectures Notes in Electrical Engineering, pp. 321-327.
24 Pollard, B. (1982), "Fatigue strength of spot welds in titanium-bearing HSLA steels", Technical Paper; SAE International (The Engineering Resource for Advancing Mobility), Detroit, MI, USA.
25 Pook, L.P. (1975), "Fracture mechanics analysis of the fatigue behavior of spot welds", Int. J. Fract., 11(1), 173-176.   DOI
26 Rao, S.S. (1996), Engineering Optimization: Theory and Practice.
27 Thornton, P.H., Krause, A.R. and Davies, R.G. (1996), "The aluminum spot weld", Weld. J. Res. Suppl., 75(3), 101-108.
28 Rathbun, R.W., Matlock, D.K. and Speer, J.G. (2003), "Fatigue behavior of spot-welded high-strength sheet steels", Weld. J. Res. Suppl., 82(8), 207-218.
29 Soderberg, R., Warmefjord, K., Lindvist, L. and Berlin R. (2012), "The influence of spot weld position variation on geometrical quality", CIRP Annals-Manufacturing Technology, 61(1), 13-16.   DOI
30 Spendley, W., Hext, G.R. and Himsworth, F.R. (1962), "Sequential application of simplex designs in optimisation and evolutionary operation", Technometrics, 4(4), 441-461.   DOI
31 Vasiliev, V.V. and Gurdal, Z. (1999), Optimal Design: Theory and Applications to Materials and Structures, Technomic Publishing, USA.
32 Wonseok, J., Dongho, B. and Ilseon, S. (2004), "Fatigue design of various type spot welded lap joints using the maximum stress", KSME Int. J., 18(1), 106-113.   DOI
33 Xu, S. and Deng, X. (2000), "An evaluation of simplified finite element models for spot-welded joints", Finite Elem. Anal. Des., 40(9-10), 1175-1194.   DOI
34 Zhang, S. (1997), "Stress intensities at spot welds", Int. J. Fract., 88, 167-185.   DOI
35 Zhang, Y. and Taylor, D. (2001), "Optimization of spot welded structures", Finite Elem. Anal. Des., 37, 1013-1022.   DOI
36 Zhou, M., Hu, S.J. and Zhang, H. (1999), "Critical specimen sizes for tensile-shear testing of steel sheets", Weld. J. Res. Suppl., 78, 305-313.