1 |
Bousselham, A. and Chaallal, O. (2006), "Behavior of reinforced concrete T-beams strengthened in shear with carbon fiber reinforced polymer-an experimental study", ACI Struct. J., 103 (3), 339-347.
|
2 |
Chen, B.L., Wang, L.G. and Qin, G.P. (2010), "Experimental research on anti-bending performance of composite RC-Filled GFRP tube members", J. Northeast. Univ. (Natural Science), 31(10), 1495-1498. [In Chinese]
|
3 |
Cho, C.G., Kwon, M. and Spacone, E. (2005), "Analytical model of concrete-filled fiber-reinforced polymer tubes based on multiaxial constitutive laws", J. Struct. Eng, 131(9), 1426-1433.
DOI
ScienceOn
|
4 |
Cole, B. and Fam, A. (2006), "Flexural load testing of concrete-filled FRP tubes with longitudinal steel and FRP rebar", J. Compos. Construct., 10(2), 161-171.
DOI
|
5 |
Davol, A., Burgueno, R. and Seible, F. (2001), "Flexural behavior of circular concrete filled FRP shell", J. Struct. Eng., 127(7), 810-817.
DOI
|
6 |
Fam, A. and Rizkalla, S. (2002), "Flexural behavior of concrete-filled fiber-reinforced polymer circular tubes", J. Compos. Construct., 6(2), 123-132.
DOI
|
7 |
Fujikake, K., Mindess, S. and Xu, H. (2004), "Analytical model for concrete confined with fibre reinforced polymer composite", J. Compos. Construct., 8(4), 341-351.
DOI
|
8 |
Helmi, K., Fam, A. and Mufti, A. (2005), "Field installation, splicing, and flexural testing of hybrid FRP/concrete piles", ACI Special Publication, Vol. SP-230-62, 1103-1120.
|
9 |
Hoult, N.A. and Lees, J.M. (2009), "Modeling of an unbonded CFRP strap shear retrofitting system for reinforced concrete beams", J. Compos. Construct., 13(4), 292-301.
DOI
|
10 |
Hu, Y.M., Yu, T. and Teng, J.G. (2011), "FRP-confined circular concrete-filled thin steel tubes under axial compression", J. Compos. Construct., 15(5), 850-860.
DOI
|
11 |
Lam, L. and Teng, J.G. (2004), "Ultimate condition of fibre reinforced polymer-confined concrete", J. Compos. Construct., 8(6), 539-548.
DOI
ScienceOn
|
12 |
Liu, L. and Lu, Y.Y. (2010), "Axial bearing capacity of short FRP confined concrete-filled steel tubular columns", J. Wuhan Univ. Technol. (Materials Srcience), 25(3), 454-458.
DOI
|
13 |
Lu, G.C. (2005), "Study on behavior of concrete-filled FRP tubes under axial compression", Ph.D. Dissertation; Tsinghua University, Beijing, China. [In Chinese]
|
14 |
Manjunatha, C.M., Taylor, A.C., Kinloch, A.J. and Sprenger, S. (2010), "The tensile fatigue behavior of a GFRP composite with rubber particle modified epoxy matrix", J. Reinf. Plast. Compos., 29(14), 2170-2183.
DOI
|
15 |
Moran, D.A. and Pantelides, C.P. (2002), "Stress-strain model for fibre-reinforced polymer-confined concrete", J. Compos. Construct., 6(4), 233-240.
DOI
|
16 |
Matthys, H., Toutanji, K. and Taerwe, L. (2005), "Axial load behaviour of large-scale columns confined with fibre-reinforced polymer composites", ACI Struct. J., 102(2), 258-267.
|
17 |
Mehrdad, S.M. and Mohammad, H.R. (2009), "Experimental and analytical studies on one-way concrete slabs reinforced with GFRP molded gratings", Steel Compos. Struct., Int. J., 9(6), 569-584.
DOI
|
18 |
Mirmiran, A., Shahawy, M. and Sammaan, M. (1999), "Strength and ductility of hybrid FRP-concrete beam-columns", J. Struct. Eng., 125(10), 1085-1093.
DOI
|
19 |
Panda, K.C., Bhattacharyya, S.K. and Barai, S.V. (2012), "Shear behaviour of RC T-beams strengthened with U-wrapped GFRP sheet", Steel Compos. Struct., Int. J., 12(2), 149-166.
DOI
|
20 |
Qin, G.P. (2009), "Mechanical behaviors study on GFRP tube filled with reinforced concrete members", Ph.D. Dissertation; Northeastern University, Shenyang, China. [In Chinese]
|
21 |
Saadatmanesh, H. and Ehsani, M.R. (1994), "Strength and ductility of concrete external reinforced with fiber composite straps", ACT Struct. J., 91(4), 434-447.
|
22 |
Saenz, N. and Pantelides, C.P. (2007), "Strain-based confinement model for FRP-confined concrete", J. Struct. Eng., 133(6), 825-833.
DOI
|
23 |
Salim, H.A., Barker, M. and Davalos, J.F. (2006), "Approximate series solution for analysis of FRP composite highway bridges", J. Compos. Construct., 10(4), 357-366.
DOI
|
24 |
Xiao, Y. and Wu, H. (2003), "Retrofit of reinforced concrete columns using partially stiffened steel jackets", J. Struct. Eng., 129(6), 725-732.
DOI
|
25 |
Shao, Y. and Mirmiran, A. (2005), "Experimental Investigation of Cycled Behavior of Concrete Fi11ed Fiber Reinforced Polymer Tubes", J. Compos. Construct., 9(3), 263-273.
DOI
|
26 |
Wang, B.L. and Wang, Q.X. (2009), "Research status of FRP tube filled with concrete composite structure", Ind. Construct. (supplement), 39(437), 262-265. [In Chinese]
|
27 |
Wang, Y.F., Ma, Y.S. and Wu, H.L. (2011), "Reinforced high-strength concrete square columns confined by aramid FRP jackets. part I: Experimental study", Steel Compos. Struct., Int. J., 11(6), 455-468.
DOI
|
28 |
Xiong, W., Cai, C.S., Xiao, R.C. and Zhang, Y. (2012), "Design strategy of hybrid stay cable system using CFRP and steel materials", Steel Compos. Struct., Int. J., 13(1), 47-70.
DOI
|
29 |
Yu, T., Wong, Y.L., Teng, J.G., Dong, S.L. and Lam, E.S.S. (2006), "Flexural behavior of hybrid FRP-concrete- steel double skin tubular members", J. Compos. Construct., 10(5), 443-452.
DOI
|
30 |
Zhu, Z.Y., Ahmad, I. and Mirmiran, A. (2006), "Splicing of precast concrete-filled FRP tubes", J. Compos. Construct., 10(4), 345-356.
DOI
|