1 |
Wagner, H. (1931), "Flat sheet metal girders with very thin metal web, Part III", NACA technical note 605; National Advisory Committee for Aeronautics, Washington, D.C., USA.
|
2 |
Abaqus (2011), Abaqus/Standard user's manual, Version 6.11. 2011; Pawtucket (RI): Hibbitt, Karlsson, & Sorensen, Inc., HKS.
|
3 |
AISC (2005), Seismic Provisions for Structural Steel Buildings, ANSI/AISC 341-05; American Institute of Steel Construction, Chicago, IL, USA.
|
4 |
Berman, J.W. and Bruneau, M. (2005), "Experimental investigation of light-gauge steel plate shear", J. Struct. Eng., 131(2), 259-267.
DOI
|
5 |
Bhowmick, A.K., Grondin, G.Y. and Driver, R.G. (2010), "Performance of type D and type LD steel plate", Can. J. Civil Eng., 37, 88-98.
DOI
|
6 |
Bozdogan, K.B. (2013), "Free vibration analysis of asymmetric shear wall-frame buildings using modified finite element-transfer matrix method", Struct. Eng. Mech., Int. J., 46(1), 1-17.
DOI
ScienceOn
|
7 |
Choi, B.-J., Kim, W.-K., Kim, W.-B. and Kang, C.-K. (2013), "Compressive performance with variation of yield strength and width-thickness ratio for steel plate-concrete wall structures", Steel Compos. Struct., Int. J., 14(5), 473-491.
DOI
|
8 |
CSA (2009), Limit states design of steel structures, CAN/CSA-S16-09; Canadian Standards Association, Toronto, ON, Canada.
|
9 |
Dastfan, M. and Driver, R.G. (2008), "Flexural stiffness limits for frame members of steel plate shear wall systems", Proceeding of Annual Stability Conference, Structural Stability Research Council, Nashville, TN, USA, April.
|
10 |
Driver, R.G., Kulak, G.L., Kennedy, D.J.L. and Elwi, A.E. (1997), "Seismic behaviour of steel plate shear walls", Structural Engineering Report No. 215; Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada.
|
11 |
Elgaaly, M. (1998), "Thin steel plate shear walls behavior and analysis", Thin-Wall. Struct., 32(1-3), 151-180.
DOI
|
12 |
Elgaaly, M., Caccese, V. and Du, C. (1993), "Post-buckling behavior of steel-plate shear walls under cyclic loads", J. Struct. Eng., 119(2), 588-605.
DOI
|
13 |
Kharrazi, M.H.K. (2005), "Rational method for analysis and design of steel plate walls", Ph.D. Thesis, University of British Columbia, Vancouver, BC, Canada.
|
14 |
Kuhn, P., Peterson, J.P. and Levin, L.R. (1952), "A Summary of Diagonal Tension, Part I: Methods of Analysis", NACA technical note 2661; National Advisory Committee for Aeronautics, Washington, D.C., USA.
|
15 |
Lubell, S., Prion, H.G.L., Ventura, C.E. and Rezai, M. (2000), "Unstiffened steel-plate-shear wall performance under cyclic loading", J. Struct. Eng., 126(4), 453-460.
DOI
|
16 |
Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2007), "OpenSees command language manual", Pacific Eathquake Engineering Research Center, University of California, Berkeley, CA, USA.
|
17 |
NRC (2010), National Building Code of Canada (NBCC), Canadian Commission on Building and Fire Codes; National Research Council of Canada, Ottawa, ON, Canada.
|
18 |
Memarzadeh, P., Azhari, M. and Saadatpour, M.M. (2010), "A parametric study on buckling loads and tension field stress patterns of steel plate shear walls concerning buckling modes", Steel Compos. Struct., Int. J., 10(1), 87-108.
DOI
|
19 |
Mohammad, R.B., Grondin, G.Y. and Elwi, A.E. (2003), "Experimental and numerical investigation of steel plate shear wall", Structural Engineering Report No. 254; Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada.
|
20 |
Neilson, D.A.H. (2010), "Welding of light gauge infill panels for steel plate shear walls", M.Sc. Thesis, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada.
|
21 |
Shahi, R., Lam, N., Gad, E. and Wilson, J. (2013), "Protocol for testing of cold-formed steel wall in regions of low-moderate seismicity", Earthq. Struct., Int. J., 4(6), 629-647.
DOI
|
22 |
Topkaya, C. and Atasoy, M. (2009), "Lateral stiffness of steel plate shear wall systems", Thin-Wall. Struct., 47(827-835), 827-835.
DOI
|
23 |
Thorburn, L.J., Kulak, G.L. and Montgomery, C.J. (1983), "Analysis of steel plate shear walls", Structural Engineering Report No. 107; Department of Civil Engineering, University of Alberta, Edmonton, AB, Canada.
|
24 |
Vatansever, C. and Yardimci, N. (2011), "Experimental investigation of thin steel plate shear walls with different infill-to-boundary frame connections", Steel Compos. Struct., Int. J., 11(3), 251-271.
DOI
|