Browse > Article
http://dx.doi.org/10.12989/scs.2015.18.2.345

Effect of some welding parameters on nugget size in electrical resistance spot welding  

Savas, Omer (Yildiz Technical University, Naval Architect and Marine Engineering Faculty)
Publication Information
Steel and Composite Structures / v.18, no.2, 2015 , pp. 345-355 More about this Journal
Abstract
In this study, the effects of weld parameters on nugget size and tensile-shear strength of welding joint in electrical resistance spot welding of galvanized DP 600 steel sheets having 1.2 mm were investigated. Taguchi design method has been employed to examine the effects of five parameters of welding current, electrode pressure, welding time, clamping time and holding time by using the $L_{27}(5^3)$ orthogonal array. Results showed that the most effective parameters on tensile shear strength and the nugget size ratio (hn/dn) were found as welding current and welding time, whereas electrode pressure, clamping time and holding time were less effective factors. Max. 545 MPa strength was obtained through proposed optimum conditions by Taguchi technique.
Keywords
resistance spot welding; nugget size ratio; tensile shears strength; Taguchi method;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Anik, S. and Gulbahar, B. (1989), "The relationships between tensile-shear strength and weld nugget in 17% Cr-ferritic stainless steels", Proceedings of Second National Welding Symposium, Istanbul, Turkey, November, 94-105, pp. 13-15.
2 Aslanlar, S. (2006), "The effect of nucleus size on mechanical properties in electrical resistance spot welding of sheets used in automotive industry", Mater. Des., 27(2), 125-131.   DOI
3 Aslanlar, S., Ogur, A., Ozsarac, U., Ilhan, E. and Demir, Z. (2007), "Effect of welding current on mechanical properties of galvanized chromided steel sheets in electrical resistance spot welding", Mater. Des., 28(1), 2-7.   DOI
4 Aslanlar, S., Ogur, A., Ozsarac, U. and Ilhan, E. (2008), "Welding time effect on mechanical properties of automotive sheets in electrical resistance spot welding", Mater. Des., 29(7), 1427-1431.   DOI
5 Aslanlar, S., Ozsarac, U., Varol, F., Ilhan, E., Ferik E. and Ekici, M. (2013), "Effect of welding parameters on mechanical properties of DP 600 steel sheets joined by resistance spot welding", Proceedings of the 7th International Advanced Technologies Symposium (IATS'13), Istanbul, Turkey, October-November.
6 Esme, U. (2009), "Application of Taguchi method for the optimization of resistance spot welding process", Arab. J. Sci. Eng., 34(2B).
7 Hamidinejad, S.M., Kolahan, F. and Kokabi, A.H. (2012), "The modeling and process analysis of resistance spot welding on galvanized steel sheets used in car body manufacturing", Mater. Des., 34, 759-767.   DOI
8 Jenney, C.L. and Brien, A.O. (2001), Welding Handbook, (9th Ed.), Volume 1, American Welding Society,
9 Lantz, J. (2000), "Principles of Resistance Welding - Weld Heads, Electrodes and Quality", Trade Publication, Welding Design and Fabrication, 73(4), 46 p.
10 Liu, W., Wang, R., Han, J., Xu, X. and Li, Q. (2010), "Microstructure and mechanical performance of resistance spot-welded cold-rolled high strength austenitic stainless steel", Journal of Materials Processing Technology, 210(14), 1956-1961.   DOI
11 Lochner, R.H. and Matar, J.E. (1990), Designing For Quality: An Introduction to the Best of Taguchi and Western Methods of Statistical Experimental Design, Springer, Netherlands.
12 Qiu, R., Shi, H., Yu, H., Zhang, K., Tu, Y. and Satonaka, S. (2010), "Effects of electrode force on the characteristic of magnesium alloy joint welded by resistance spot welding with cover plates", Mater. Manuf. Process., 25(11), 1304-1308.   DOI
13 Ross, P.J. (1988), Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments, Parameter and Tolerance Design, McGraw-Hill Inc., New York, NY, USA.
14 Vural, M. and Akkus, A. (2004), "On the resistance spot weldability of galvanized interstitial free steel sheets with austenitic stainless steel sheets", J Mater. Process. Technol., 153-154, 1-6.   DOI
15 Vural, M., Akkus, A. and Eryurek, B. (2006), "Effect of welding nugget diameter on the fatigue strength of the resistance spot welded joints of different steel sheets", J. Mater. Process. Technol., 176(1-3), 127-132.   DOI
16 Xu, J., Jiang, X., Zeng, Q., Zhai, T., Leonhardt, T., Farrell, J., Umstead, W. and Effgen, M.P. (2007), "Optimization of resistance spot welding on the assembly of refractory alloy 50Mo-50Re thin sheet", J. Nucl. Mater., 366(3), 417-425.   DOI