Browse > Article
http://dx.doi.org/10.12989/scs.2014.16.3.305

Simulations of PEC columns with equivalent steel section under gravity loading  

Begum, Mahbuba (Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET))
Ghosh, Debaroti (Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET))
Publication Information
Steel and Composite Structures / v.16, no.3, 2014 , pp. 305-323 More about this Journal
Abstract
This paper presents numerical simulations of partially encased composite columns (PEC) with equivalent steel sections. The composite section of PEC column consists of thin walled welded H- shaped steel section with transverse links provided at regular intervals between the flanges. Concrete is poured in the space between the flanges and the web plate. Most of the structural analysis and design software do not handle such composite members due to highly nonlinear material behavior of concrete as well as due to the complex interfacial behaviour of steel and concrete. In this paper an attempt has been made to replace the steel concrete composite section by an equivalent steel section which can be easily incorporated in the design and analysis software. The methodology used for the formulation of the equivalent steel section is described briefly in the paper. Finite element analysis is conducted using the equivalent steel section of partially encased composite columns tested under concentric gravity loading. The reference test columns are obtained from the literature, encompassing a variety of geometric and material properties. The finite element simulations of the composite columns with equivalent steel sections are found to predict the experimental behaviour of partially encased composite columns with very good accuracy.
Keywords
composite; columns; equivalent; steel; partially; encased; finite; element;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Begum, M., Driver, R.G. and Elwi, A.E. (2007), "Finite element modeling of partially encased composite columns using the dynamic explicit solution method", J. Struct. Eng., ASCE, 133(3), 326-334.   DOI   ScienceOn
2 Chen, Y., Wang, T., Yang, J. and Zhao, X. (2010), "Test and numerical simulation of partially encased composite columns subject to axial and cyclic horizontal loads", Int. J. Steel Struct., 10(4), 385-393.
3 Chicoine, T., Massicotte, B. and Tremblay, R. (2003), "Long-term behavior and strength of partially-encased composite columns with built up shapes", J. Struct. Eng., ASCE, 129(2), 141-150.   DOI   ScienceOn
4 CSA (2009), "CSA S16-09, Limit States Design of Steel Structures", Canadian Standards Association, Toronto, ON, Canada.
5 Chicoine, T., Tremblay, R. and Massicotte, B. (2002), "Finite element modelling and design of partially encased composite columns", Steel Compos. Struct., Int. J., 2(3), 171-194.   DOI
6 Chicoine, T., Tremblay, R., Massicotte, B., Yalcin, M., Ricles, J. and Lu, L.-W. (2000), "Test programme on partially-encased built up three-plate composite columns", Joint Report EPM/GCS No. 00-06, February, Department of Civil, Geological and Mining Engineering, Ecole Polytechnique, Montreal, Canada - ATLSS Engineering Research Centre, No. 00-04, Lehigh University, Bethlehem, PN, USA.
7 CSA (2004), "CSA G40.21-04, Structural Quality Steel", Canadian Standards Association, Rexdale, ON, Canada.
8 Dastfan, M. (2011), "Ductile steel plate shear walls with PEC columns", Ph.D. Thesis, Department of Civil and Environmental Engineering, University of Alberta, Alberta, AB, Canada.
9 Deng, X., Dastfan, M. and Driver, R.G. (2008), "Behaviour of steel plate shear walls with composite columns", Proceedings of American Society of Civil Engineers Structures Congress, Vancouver, BC, Canada.
10 HKS (2003), Hibbitt, Karlsson and Sorensen, Inc., ABAQUS / Standard User's Manual, Version 6.3.
11 HKS (2007), Hibbitt, Karlsson and Sorensen, Inc., ABAQUS / Analysis User's Manual, Version 6.7.
12 Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plastic-damage model for concrete", Int. J. Solids Struct., 25(3), 229-326.
13 Maranda, R. (1998), "Analyses par Elements Finis de Poteaux Mixtes Avec Sections d'acier En I de Classe 4", Report no. EPM/GCS-1998-11, Department of Civil, Geological and Mining Engineering, Ecole Polytechnique, Montreal, QC, Canada.
14 Marinopoulou, A.A., Balopoulos, V.D. and Kalfas, C.N. (2007), "Simulation of partially encased composite steel-concrete columns with steel columns", J. Construct. Steel Res., 63(8), 1058-1065.   DOI   ScienceOn
15 Prickett, B.S. and Driver, R.G. (2006), "Behaviour of partially encased composite columns made with high performance concrete", Structural Engineering Report No. 262, Department of Civil and Environmental Engineering, University of Alberta, AB, Canada.
16 Tremblay, R., Massicotte, B., Filion, I. and Maranda, R. (1998), "Experimental study on the behaviour of partially encased composite columns made with light welded h steel shapes under compressive axial loads", Proceedings of SSRC Annual Technical Session & Meeting, Atlanta, GA, USA, September, pp. 195-204.
17 Bouchereau, R. and Toupin, J.-D. (2003), "Etude du Comportement en Compression-Flexion des Poteaux Mixtes Partiellement Enrobes", Report EPM/GCS-2003-03, Department of Civil, Geological and Mining Engineering, Ecole Polytechnique, Montreal, QC, Canada.