Browse > Article
http://dx.doi.org/10.12989/scs.2014.16.3.269

An experimental study on the ballistic performance of FRP-steel plates completely penetrated by a hemispherical-nosed projectile  

Chen, Changhai (Department of Naval Architecture Engineering, Naval University of Engineering)
Zhu, Xi (Department of Naval Architecture Engineering, Naval University of Engineering)
Hou, Hailiang (Department of Naval Architecture Engineering, Naval University of Engineering)
Zhang, Lijun (Department of Naval Architecture Engineering, Naval University of Engineering)
Shen, Xiaole (Lvshun Proving Ground)
Tang, Ting (Department of Naval Architecture Engineering, Naval University of Engineering)
Publication Information
Steel and Composite Structures / v.16, no.3, 2014 , pp. 269-288 More about this Journal
Abstract
Experiments were carried out to investigate the ballistic performance of fiber reinforced plastic(FRP)-steel plates completely penetrated by hemispherical-nosed projectiles at sub-ordnance velocities greater than their ballistic limits. The FRP-steel plate consists of a front FRP laminate and a steel backing plate. Failure mechanisms and impact energy absorptions of FRP-steel plates were analyzed and compared with FRP laminates and single steel plates. The effects of relative thickness, manufacturing method and fabric type of front composite armors as well as the joining style between front composite armors and steel backing plates on the total perforation resistance of FRP-steel plates were explored. It is found that in the case of FRP-steel plates completely penetrated by hemispherical-nosed projectiles at low velocities, the failure modes of front composite armors are slightly changed while for steel backing plates, the dominate failure modes are greatly changed due to the influence of front composite armors. The relative thickness and fabric type of front composite armors as well as the joining style of FRP-steel plates have large effects whereas the manufacturing method of front composite armors has slight effect on the total perforation resistance of FRP-steel plates.
Keywords
ballistic performance; perforation; composite armor; low-velocity impact; hemispherical-nosed projectile;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Ben-Dor, G., Dubinsky, A. and Elperin, T. (1998b), "Effect of air gaps on ballistic resistance of targets for conical impactors", Theoret. Appl. Fract. Mech., 30(3), 243-249.   DOI   ScienceOn
2 Almohandes, A.A., Abdel-Kader, M.S. and Eleiche, A.M. (1996), "Experimental investigation of the ballistic resistance of steel-fiberglass reinforced polyester laminated plates", Compos. Part B: Eng., 27(5), 447-458.
3 Backman, M.E. and Goldsmith, W. (1978), "The mechanics of penetration of projectiles into targets", Int. J. Eng. Sci., 16(1), 1-99.   DOI   ScienceOn
4 Ben-Dor, G., Dubinsky, A. and Elperin, T. (1998a), "On the ballistic resistance of multi-layered targets with air gaps", Int. J. Solids Struct., 35(23), 3097-3103.   DOI   ScienceOn
5 Chen, C.H., Zhu, X., Hou, H.L. and Wang, T.Q. (2011), "Experimental study on composite armor structure of warship topside against kinetic armor-piercing", Explosion and Shock Waves, 31(1), 11-18. [In Chinese]
6 Corbett, G.G., Reid, S.R. and Johnson, W. (1996), "Impact loading of plates and shells by free-flying projectiles-a review", Int. J. Impact Eng., 18(2), 141-230.   DOI   ScienceOn
7 Corran, R.S.J., Shadbolt, P.J. and Ruiz, C. (1983), "Impact loading of plates-an experimental investigation", Int. J. Impact Eng., 1(1), 3-22.   DOI   ScienceOn
8 Gupta, N.K. and Madhu, V. (1997), "An experimental study of normal and oblique impact of hard-core projectile on single and layered plates", Int. J. Impact Eng., 19(5-6), 395-414.   DOI   ScienceOn
9 Dean, J., Dunleavy, C.S., Brown, P.M. and Clyne, T.W. (2009), "Energy absorption during projectile perforation of thin steel plates and the kinetic energy of ejected fragments", Int. J. Impact Eng., 36(10-11), 1250-1258.   DOI   ScienceOn
10 Dey, S., Borvik, T., Teng, X., Wierzbicki, T. and Hopperstad, O.S. (2007), "On the ballistic resistance of double-layered steel plates-an experimental and numerical investigation", Int. J. Solids Struct., 44(20), 6701-6723.   DOI   ScienceOn
11 Elek, P., Jaramaz, S. and Mickovic, D. (2005), "Modeling of perforation of plates and multi-layered metallic targets", Int. J. Solids Struct., 42(3-4), 1209-1224.   DOI   ScienceOn
12 Gupta, N.K., Iqbal, M.A. and Sekhon, G.S. (2008), "Effect of projectile nose shape, impact velocity and target thickness on the deformation behavior of layered plates", Int. J. Impact Eng., 35(1), 37-60.   DOI   ScienceOn
13 Kreyenhagen, K.N., Wagner, M.H., Piechocki, J.J. and Wagner, M.H. (1970), "Ballistic limit determination in impacts on multimaterial laminated targets", AIAA J., 18(12), 2147-2151.
14 Liang, C.C., Yang, M.F., Wu, P.W. and Teng, T.L. (2005), "Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application", Ocean Eng., 32(3-4), 441-468.   DOI   ScienceOn
15 Nia, A.A. and Hoseini, G.R. (2011), "Experimental study of perforation of multi-layered targets by hemispherical-nosed projectiles", Mater. Des., 32(2), 1057-1065.   DOI   ScienceOn
16 Lim, C.T., Tan, V.B.C. and Cheong, C.H. (2002), "Perforation of high-strength double-ply fabric system by varying shaped projectiles", Int. J. Impact Eng., 27(6), 577-591.   DOI   ScienceOn
17 Marom, I. and Bodner, S.R. (1979), "Projectile perforation of multi-layered beams", Int. J. Mech. Sci., 21(8), 489-504.   DOI   ScienceOn
18 Teng, X., Dey, S., Borvik, T. and Wierzbicki, T. (2007), "Protection performance of double layered metal shields against projectile impact", J. Mech. Mater. Solids, 2(7), 1307-1328.
19 Nurick, G.N. and Walters, C.E. (1990), "The ballistic penetration of multiple thin plates separated by an air gap", Proceedings of SEM Conference on Experimental Mechanics, pp. 631-637.
20 Radin, J. and Goldsmith, W. (1988), "Normal projectile penetration and perforation of layered targets", Int. J. Impact Eng., 7(2), 229-259.   DOI   ScienceOn
21 Teng, X., Wierzbicki, T. and Huang, M. (2008), "Ballistic resistance of double-layered armor plates", Int. J. Impact Eng., 35(8), 870-884.   DOI   ScienceOn
22 Woodward, R.L. and Cimpoeru, S.J. (1998), "A study of the perforation of aluminium laminate targets", Int. J. Impact Eng., 21(3), 117-131.   DOI   ScienceOn
23 Zhu, X., Hou, H.L., Gu, M.B., Mei, Z.Y. and Chen, X. (2006), "Experimental study on armor protection against ballistic impact of small caliber artillery", Explosion and Shock Waves, 26(3), 262-268. [In Chinese]
24 Ben-Dor, G., Dubinsky, A. and Elperin, T. (2006), "Effect of air gaps on the ballistic resistance of ductile shields perforated by non-conical impactors", J. Mech. Mater. Struct., 1(2), 279-299.   DOI
25 Zukas, J.A. and Scheffler, D.R. (2001), "Impact effects in multilayered plates", Int. J. Solids Struct., 38(19), 3321-3328.   DOI   ScienceOn
26 Zhu, X., Mei, Z.Y. and Liu, R.Q. (2003), "Warship's light composite armor structure resistibility for ballistic impact", Explosion and Shock Waves, 23(1), 61-66. [In Chinese]