1 |
Ai Kah Soh, Li Chun Bian and Chakrabarty, J. (2000), "Elastic/plastic buckling of a composite flat plate subjected to uniform edge compression", Thin-Wall. Struct., 38(3), 247-265.
DOI
ScienceOn
|
2 |
Kyung-SuNa and Ji-Hwan Kim. (2006), "Three dimensional thermo mechanical buckling analysis for functionally graded composite plates", Compos. Struct., 73(4), 413-422.
DOI
ScienceOn
|
3 |
Mallick,P.K.(2007), "Fiber-Reinforced Composites Materials, Manufacturing and Design, CRC Press, Taylor and Francis Group.
|
4 |
Michael .P Nemeth. (1990), "Buckling and post buckling of compression loaded isotropic plates with cut outs", AIAA J., 29(2), 313-314.
|
5 |
Mohd Aidy Faizal, Yeo Kiam Beng and Mohd Noh Dalimin. (2006), "Tensile property of hand layup plain-woven E-glass/ polyester composite: curing pressure and ply arrangement effect", Borneo Sci., 19, 27-34.
|
6 |
Pein, C.W. and Zahari, R. (2007), "Experimental investigation of the damage behaviour of woven fabric glass/epoxy laminated plates with circular cut-outs subjected to compressive force", Inter. J. Eng. Technol., 4(2), 260-265.
|
7 |
Roberts, J.C. Bao, G. and White, G.J. (1999), "Experimental, numerical and analytical results for bending and buckling of rectangular orthotropic plates", Compos. Struct., 43(4), 289-299.
|
8 |
Shrivastava, A.K and Singh, R.K. (1999), "Effect of aspect ratio on buckling of composites", Compos. Sci. Technol.,59(3), 439-445.
DOI
ScienceOn
|
9 |
Akhbari, OM. Mahmood, M. Shokrieh. and Nosraty, H. (2008), "A study on buckling behavior of composite sheets reinforced by hybrid woven fabrics", Transactions of the CSME / de la SCGM, 32(1), 81-89.
|
10 |
ASTM D2584. (2002), "Standard test method for ignition loss of cured reinforced resins", Annual Book of ASTM Standards, West Conshohocken, American Soc. Test. Mater., 8(1).
|
11 |
ASTM D3039/D3039M. (2000), "Standard test method for tensile properties of polymer matrix composite materials", Annual Book of ASTM Standards, West Conshohocken, American Soc. Test. Mater., 15(3).
|
12 |
Aymerich, F. and Serra, M. (2008), "Optimization of laminate stacking sequence for maximum buckling load using the ant colony optimization (ACO) metaheuristic", Compos: Part A., 39(2), 262-272.
DOI
ScienceOn
|
13 |
Balamurugan,V, Ganapathi, M. and Patel, B.P.(1998), "Postbuckling behaviour of anisotropic laminated compositeplates due to shear loading", Defence Sci. J., 48(4), 433-440
DOI
|
14 |
Buket Okutan Baba and Aysun Baltaci. (2007), "Buckling characteristics of symmetrically and symmetrically laminated composite plates with central cut-outs", Compos. Mater., 14(4), 265-276
DOI
ScienceOn
|
15 |
Chaitalli Ray. (2004), "An investigation on the effect of fiber weight fraction on buckling of laminated composite plates", J. Reinf. Plast. Compos., 23(9), 951-957.
DOI
ScienceOn
|
16 |
Fatai Olufemi aramdie, Isiaka Oluwole Oladele, and Davies Oladayo.(2008), "Evaluation of the effect of fiber volume fraction on the mechanical properties of polymer matrix composite", FOLORUNSO Metallurgical and Materials Engineering Dept., Federal University of Technology, Akure, Ondo State, Nigeria.
|
17 |
Featherston, C.A. and A. Watson, A. (2005), "Buckling of optimised composite plates under shear and in-plane bending", Compos. Sci. Technol., 65(6), 839-853.
DOI
ScienceOn
|
18 |
Iyengar N G R. (2006), "Structural stability of columns and plates", Affiliated East West Press Ltd.
|
19 |
Kormaníková, E. and Mamuzic, I. (2008), "Buckling analysis of a laminate plate", METABK, 47(2), 129-132.
|