Browse > Article
http://dx.doi.org/10.12989/cac.2022.30.4.277

Fatigue performance evaluation of reinforced concrete element: Efficient numerical and SWOT analysis  

Saiful Islam, A.B.M. (Department of Civil & Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University)
Publication Information
Computers and Concrete / v.30, no.4, 2022 , pp. 277-287 More about this Journal
Abstract
Due to the scarcity of extortionate experimental data, fatigue failure of the reinforced concrete (RC) element might be achieved economically adopting nonlinear finite element (FE) analysis as an alternative approach. However, conventional implicit dynamic analysis is expensive, quasi-static method overlooks interaction effects and inertia, direct cyclic analysis computes stabilized responses. Apart from this, explicit dynamic analysis may provide a numerical operating system for factual long-term responses. The study explores the fatigue behavior based on a simplified explicit dynamic solution employing nonlinear time domain analysis. Among fourteen RC beams, one beam is selected to validate under static loading, one under fatigue with the experimental study and other twelve to check the detail fatigue behavior. The SWOT (Strength, Weakness, Opportunities, Threats) analysis has been carried out to pinpoint the detail scenario in the adoption of numerical approach as an alternative to the experimental study. Excellent agreement of FE and experimental results is seen. The 3D nonlinear RC beam model at service fatigue limits is truthful to be used as an expedient contrivance to envisage the precise fatigue behavior. The simplified analysis approach for RC beam under fatigue offers savings in computation to predict responses providing acceptable accuracy rather than the complicated laboratory investigation. At higher frequency, the flexural failure occurs a bit earlier gradually compared to the repeated loading case of lower frequency. The deflection increases by 6%-10% at the end of first cycle for beams with increasing frequency of cyclic loading. However, at the end of fatigue loading, greater deflection occur earlier for higher load range because of more rapid stiffness degradation. For higher frequency, a slight boost in concrete compressive strains at an initial stage of loading has been seen indicating somewhat stepper increment. Stiffness degradation in larger loading cycle at same duration escalates the upsurge of the rate of strain in case of higher frequency.
Keywords
cracks; cyclic loading; damage behavior; explicit dynamic; fatigue; nonlinearities; RC beam; SWOT analysis;
Citations & Related Records
Times Cited By KSCI : 8  (Citation Analysis)
연도 인용수 순위
1 Leitner, M., Pauer, P., Kainzinger, P. and Eichlseder, W. (2017), "Numerical effects on notch fatigue strength assessment of non-welded and welded components", Comput. Struct., 191, 51-61. https://doi.org/10.1016/j.compstruc.2017.06.009.   DOI
2 Yang, D.Y. and Frangopol, D.M. (2018), "Probabilistic optimization framework for inspection/repair planning of fatigue-critical details using dynamic Bayesian networks", Comput. Struct., 198, 40-50. https://doi.org/10.1016/j.compstruc.2018.01.006.   DOI
3 Li, C.Z., Hong, J., Xue, F., Shen, G.Q., Xu, X. and Luo, L. (2016), "SWOT analysis and Internet of Things-enabled platform for prefabrication housing production in Hong Kong", Habitat Int., 57, 74-87. https://doi.org/10.1016/j.habitatint.2016.07.002.   DOI
4 Long, X.Y., Jiang, C., Liu, K., Han, X., Gao, W. and Li, B.C. (2018), "An interval analysis method for fatigue crack growth life prediction with uncertainty", Comput. Struct., 210, 1-11. https://doi.org/10.1016/j.compstruc.2018.09.005.   DOI
5 Pancic, A., Milasinovic, D.D. and Goles, D. (2021), "Crack propagation in flexural fatigue of concrete using rheological-dynamical theory", Comput. Concrete, 27(1), 55-62. https://doi.org/10.12989/cac.2021.27.1.055.   DOI
6 Rahman, M.M., Jumaat, M.Z. and Islam, A.B.M.S. (2017), "Weight minimum design of concrete beam strengthened with glass fiber reinforced polymer bar using genetic algorithm", Comput. Concrete, 19(2), 127-131. https://doi.org/10.12989/cac.2017.19.2.127.   DOI
7 Saribiyik, A., Abodan, B. and Balci, M.T. (2021), "Experimental study on shear strengthening of RC beams with basalt FRP strips using different wrapping methods", Eng. Sci. Technol., 24(1), 192-204. https://doi.org/10.1016/j.jestch.2020.06.003.   DOI
8 Sasaki, K.K., Paret, T., Araiza, J.C. and Hals, P. (2010), "Failure of concrete T-beam and box-girder highway bridges subjected to cyclic loading from traffic", Eng. Struct., 32(7), 1838-1845. https://doi.org/10.1016/j.engstruct.2010.01.006.   DOI
9 Wang, J., Chen, X., Wu, C., Shi, Z. and Cheng, X. (2022), "Experimental study on fracture behavior of SCC pavement slab containing crumb rubber under cyclic loading", Comput. Concrete, 29(1), 47-57. https://doi.org/10.12989/cac.2022.29.1.047.   DOI
10 Ansari, M., Jeddi, M.Z., Badaruzzaman, W.H.W., Tahir, M.M., Osman, S.A. and Hosseinpour, E. (2021), "A numerical investigation on the through rib stiffener beam to concrete-filled steel tube column connections subjected to cyclic loading", Eng. Sci. Technol., 24(3), 728-735. https://doi.org/10.1016/j.jestch.2020.10.004.   DOI
11 ASTM C39/C39M-20 (2020), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM C39/C39M-20, ASTM International, West Conshohocken, PA.
12 Beesley, R., Chen, H. and Hughes, M. (2017), "A novel simulation for the design of a low cycle fatigue experimental testing programme", Comput. Struct., 178, 105-118. https://doi.org/10.1016/j.compstruc.2016.09.004.   DOI
13 BS EN 12390-5:2019 (2019), Testing Hardened Concrete, Flexural Strength of Test Specimens, BSI.
14 Hawileh, R.A. (2012), "Nonlinear finite element modeling of RC beams strengthened with NSM FRP rods", Constr. Build. Mater., 27(1), 461-471. https://doi.org/10.1016/j.conbuildmat.2011.07.018.   DOI
15 Murali, G., Indhumathi, T., Karthikeyan, K. and Ramkumar, V. (2018), "Analysis of flexural fatigue failure of concrete made with 100% coarse recycled and natural aggregates", Comput. Concrete, 21(3), 291-298. https://doi.org/10.12989/cac.2018.21.3.291.   DOI
16 Hosen, M.A., Jumaat, M.Z., Alengaram, U.J., Sulong, N.H.R. and Islam, A.B.M. S. (2019), "Structural performance of lightweight concrete beams strengthened with side-externally bonded reinforcement (S-EBR) technique using CFRP fabrics", Compos. Part B: Eng., 176, 107323. https://doi.org/10.1016/j.compositesb.2019.107323.   DOI
17 Huang, Y., Chen, S. and Gu, P. (2022), "Numerical analysis on fatigue behavior of ultrahigh-performance concrete-Orthotropic steel composite bridge deck", Adv. Struct. Eng., 25(6), 1151-1166. https://doi.org/10.1177/13694332211064663.   DOI
18 Islam, A. B. M. S. (2020), "Computer aided failure prediction of reinforced concrete beam", Comput. Concrete, 25(1), 67-73. http://doi.org/10.12989/cac.2020.25.1.067.   DOI
19 Milasinovic, D.D. and Landovic, A. (2018), "Rheological-dynamical analogy for analysis of vibrations and low cycle fatigue in internally damped inelastic frame structures", Comput. Struct., 196, 76-93. https://doi.org/10.1016/j.compstruc.2017.11.001.   DOI
20 Moss, D.S. (1982), "Bending fatigue of high-yield reinforcing bars in concrete", TRRL Supplementary Rep. No. 748.
21 Nasiri, A. and Shimozato, T. (2021), "Durability of preflex beam under cyclic loading", Eng. Sci. Technol., 24(6), 1361-1372. https://doi.org/10.1016/j.jestch.2021.03.003.   DOI
22 Sarkani, S., Michaelov, G., Kihl, D.P. and Bonanni, D.L. (2001), "Comparative study of nonlinear damage accumulation models in stochastic fatigue of FRP laminates", J. Struct. Eng., 127(3), 314-322. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(314).   DOI
23 Wang, X.H., Gao, Y., Gao, R.D., Wang, J. and Liu, X.L. (2017), "Influence of different fatigue loads and coating thicknesses on service performance of RC beam specimens with epoxy-coated reinforcement", Comput. Concrete, 19(3), 243-256. https://doi.org/10.12989/cac.2017.19.3.243.   DOI
24 Badawi, M. and Soudki, K. (2009), "Fatigue behavior of RC beams strengthened with NSM CFRP rods", J. Compos. Constr., 13(5), 415-421. https://doi.org/10.1061/(ASCE)1090-0268(2009)13:5(415).   DOI
25 Larrosa, N.O., Chaves, V., Navarro, A. and Ainsworth, R.A. (2017), "Application of the Microstructural Finite Element Alternating Method to assess the impact of specimen size and distributions of contact/residual stress fields on fatigue strength", Comput. Struct., 179, 15-26. https://doi.org/10.1016/j.compstruc.2016.10.011.   DOI
26 ASTM A615/A615M-20 (2020). Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement. West Conshohocken, PA: ASTM International.
27 Ayhan, A.O. and Demir, O. (2021), "Computational modeling of three-dimensional mixed mode-I/II/III fatigue crack growth problems and experiments", Comput. Struct., 243, 106399. https://doi.org/10.1016/j.compstruc.2020.106399.   DOI
28 Bell, G.G. and Rochford, L. (2016), "Rediscovering SWOT's integrative nature: A new understanding of an old framework", Int. J. Manage. Edu., 14(3), 310-326. https://doi.org/10.1016/j.ijme.2016.06.003.   DOI
29 BS EN 12390-2:2019 (2019), Testing Hardened Concrete, Making and Curing Specimens for Strength Tests, BSI.
30 Hosen, M.A., Jumaat, M.Z., Islam, A.B.M.S., Darain, K.M.U. and Rahman, M.M. (2016), "Flexural performance of reinforced concrete beams strengthened by a new side near-surface mounted technique using carbon fibre-reinforced polymer bars: Experimental and analytical investigation", Sci. Adv. Mater., 8(4), 726-740. http://dx.doi.org/10.1166/sam.2016.2656.   DOI
31 Hu, H.T., Lin, F.M. and Jan, Y.Y. (2004), "Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics", Compos. Struct., 63(3), 271-281. https://doi.org/10.1016/S0263-8223(03)00174-0.   DOI
32 Ferdous, W., Manalo, A., Peauril, J., Salih, C., Raghava Reddy, K., Yu, P., Schubel, P. and Heyer, T. (2020), "Testing and modelling the fatigue behaviour of GFRP composites-Effect of stress level, stress concentration and frequency", Eng. Sci. Technol., 23(5), 1223-1232. https://doi.org/10.1016/j.jestch.2020.01.001.   DOI
33 Hibbitt, K. (2007), ABAQUS Version 6. 7: Theory Manual, Users' Manual, Verification Man UAL and Example Problems Manual, Hibbitt, Karlson and Sorenson Inc.
34 Holopainen, S. and Barriere, T. (2018), "Modeling of mechanical behavior of amorphous solids undergoing fatigue loadings, with application to polymers", Comput. Struct., 199, 57-73. https://doi.org/10.1016/j.compstruc.2018.01.010.   DOI
35 Huda, M.N., Jumat, M.Z.B., Islam, A.B.M.S., Darain, K.M.U., Obaydullah, M. and Hosen, M.A. (2017), "Palm oil industry's bi-products as coarse aggregate in structural lightweight concrete", Comput. Concrete, 19(5), 515-526. https://doi.org/10.12989/cac.2017.19.5.515.   DOI
36 Islam, A. and Al-Kutti, W. A. (2018), "Seismic response variation of multistory base-isolated buildings applying lead rubber bearings", Comput. Concrete, 21(5), 495-504. https://doi.org/10.12989/cac.2018.21.5.495.   DOI
37 Jiang, R., Mao, C., Hou, L., Wu, C. and Tan, J. (2018), "A SWOT analysis for promoting off-site construction under the backdrop of China's new urbanisation", J. Clean. Prod., 173, 225-234. https://doi.org/10.1016/j.jclepro.2017.06.147.   DOI
38 Maekawa, K., Okamura, H. and Pimanmas, A. (2003), Non-Linear Mechanics of Reinforced Concrete, CRC Press.
39 ACI Committee 318 (2014), ACI 318-14: Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute.
40 ACI Committe 215R (1997), ACI 215R:1992 (R1997): Considerations for Design of Concrete Structures Subjected to Fatigue Loading, ACI Journal Proceedings, American Concrete Institute.
41 Al-Rousan, R. and Issa, M. (2011), "Fatigue performance of reinforced concrete beams strengthened with CFRP sheets", Constr. Build. Mater., 25(8), 3520-3529. https://doi.org/10.1016/j.conbuildmat.2011.03.045.   DOI
42 Aslani, F. and Jowkarmeimandi, R. (2012), "Stress-strain model for concrete under cyclic loading", Mag. Concrete Res., 64(8), 673-685. https://doi.org/10.1680/macr.11.00120.   DOI
43 Georgioudakis, M., Lagaros, N.D. and Papadrakakis, M. (2017), "Probabilistic shape design optimization of structural components under fatigue", Comput. Struct., 182, 252-266. https://doi.org/10.1016/j.compstruc.2016.12.008.   DOI