Browse > Article
http://dx.doi.org/10.12989/cac.2021.27.3.225

Strength and strain modeling of CFRP -confined concrete cylinders using ANNs  

Ozturk, Onur (Department of Civil Engineering, Kocaeli University)
Publication Information
Computers and Concrete / v.27, no.3, 2021 , pp. 225-239 More about this Journal
Abstract
Carbon fiber reinforced polymer (CFRP) has extensive use in strengthening reinforced concrete structures due to its high strength and elastic modulus, low weight, fast and easy application, and excellent durability performance. Many studies have been carried out to determine the performance of the CFRP confined concrete cylinder. Although studies about the prediction of confined compressive strength using ANN are in the literature, the insufficiency of the studies to predict the strain of confined concrete cylinder using ANN, which is the most appropriate analysis method for nonlinear and complex problems, draws attention. Therefore, to predict both strengths and also strain values, two different ANNs were created using an extensive experimental database. The strength and strain networks were evaluated with the statistical parameters of correlation coefficients (R2), root mean square error (RMSE), and mean absolute error (MAE). The estimated values were found to be close to the experimental results. Mathematical equations to predict the strength and strain values were derived using networks prepared for convenience in engineering applications. The sensitivity analysis of mathematical models was performed by considering the inputs with the highest importance factors. Considering the limit values obtained from the sensitivity analysis of the parameters, the performances of the proposed models were evaluated by using the test data determined from the experimental database. Model performances were evaluated comparatively with other analytical models most commonly used in the literature, and it was found that the closest results to experimental data were obtained from the proposed strength and strain models.
Keywords
artificial neural networks; CFRP; confinement; strain model; strength model;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Bisby, L.A., Chen, J.F., Li, S.Q., Cueva, N. and Crossling, K. (2011), "Strengthening fire-damaged concrete by confinement with fibre-reinforced polymer wraps", Eng. Struct., 33, 3381-3391. https://doi.org/10.1016/j.engstruct.2011.07.002.   DOI
2 Xiao, Q.G., Teng, J.G. and Yu, T. (2010), "Behavior and modeling of confined high-strength concrete", J. Compos. Constr., 14(3), 249-259. https://doi.org/10.1061/(ASCE)CC.19435614.0000070.   DOI
3 Xiao, Y. and Wu, H. (2000), "Compressive behavior of concrete confined by carbon fiber composite jackets", J. Mater. Civil Eng., 12(2), 139-146. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139).   DOI
4 Bullo, S. (2003), "Experimental study of the effects of the ultimate strain of fiber reinforced plastic jackets on the behavior of confined concrete", International Conference on Composites Inconstruction, Cosenza, Italy.
5 Cui, C. and Sheikh, S.A. (2010), "Experimental study of normal-and high-strength concrete confined with fiber-reinforced polymers", J. Compos. Constr., 14(5), 553-561. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000116.   DOI
6 Dantas, A.T.A., Leite, M.B. and Nagahama, K.D. (2013), "Prediction of compressive strength of concrete containing construction and demolition waste using artificial neural networks", Constr. Build. Mater., 38, 717-722. https://doi.org/10.1016/j.conbuildmat.2012.09.026.   DOI
7 De Lorenzis, L., Micelli, F. and La Tegola, A. (2002), "Influence of specimen size and resin type on the behavior of FRP-confined concrete cylinders", Proceedings of the 1st International Conference on Advanced Polymer Composites for Structural Applications in Construction, Thomas Telford, London, UK.
8 Erdil, B., Akyuz, U. and Yaman, I.O. (2012), "Mechanical behavior of CFRP confined low strength concretes subjected to simultaneous heating-cooling cycles and sustained loading", Mater. Struct., 45, 223-233. https://doi.org/10.1617/s11527-011-9761-6.   DOI
9 Dias da Silva, V. and Santos, J.M.C. (2001), "Strengthening of axially loaded concrete cylinders by surface composites" Proceedings International Conference on Composites in Constructions, Lisse, The Netherlands.
10 Engin, S., Ozturk, O. and Okay, F. (2015), "Estimation of ultimate torque capacity of the SFRC beams using ANN", Struct. Eng. Mech., 53(5), 939-956. https://doi.org/10.12989/sem.2015.53.5.939.   DOI
11 Firouzi, A. and Rahai, A. (2012), "An integrated ANN-GA for reliability based inspection of concrete bridge decks considering extent of corrosion-induced cracks and life cycle costs", Sci. Iran., 19(4), 974-981. https://doi.org/10.1016/j.scient.2012.06.002.   DOI
12 Howie, I. and Karbhari, V.M. (1995), "Effect of tow sheet composite wrap architecture on strengthening of concrete due to confinement. I: experimental studies", J. Reinf. Plast. Compos., 14(9), 1008-1030. https://doi.org/10.1177/073168449501400906.   DOI
13 Garson, G.D. (1991), "Interpreting neural network connection weights", Al Expert, 6(4), 47-51.
14 Goh, A. (1995), "Back-propagation neural networks for modeling complex systems", Artif. Intell. Eng., 9(3), 143-151. https://doi.org/10.1016/0954-1810(94)00011-S.   DOI
15 Guo, Y., Jianhe, X., Zhihong, X. and Jian Z. (2016), "Experimental study on compressive behavior of damaged normal- and high-strength concrete confined with CFRP laminates", Constr. Build. Mater., 107, 411-425. https://doi.org/10.1016/j.conbuildmat.2016.01.010.   DOI
16 Harmon, T.G. and Slattery, K.T. (1992), "Advanced composite confinement of concrete", Proceedings of the 1st International Conference on Advanced Composite Materials in Bridges and Structures, Canadian Society for Civil Engineering, Sherbrooke, Canada.
17 Hodhod, O.A., Said, T.E. and Ataya, A.M. (2018), "Prediction of creep in concrete using genetic programming hybridized with ANN", Comput. Concrete, 21(5), 513-523. https://doi.org/10.12989/cac.2018.21.5.513.   DOI
18 Ilki, A. and Kumbasar, N. (2008), "Compressive behavior of carbon fibre composite jacketed concrete with cicular and non-circular cross-sections", J. Earthq. Eng., 7(3), 381-406. https://doi.org/10.1080/13632460309350455.   DOI
19 Ilki, A., Kumbasar, N. and Koc, V. (2004), "Low strength concrete members externally confined with FRP sheets", Struct. Eng. Mech., 18(2), 167-194. https://doi.org/10.12989/sem.2004.18.2.167.   DOI
20 Jalal, M. and Ramezanianpour, A.A. (2012), "Strength enhancement modeling of concrete cylinders confined with CFRP composites using artificial neural networks", Compos. B. Eng., 43, 2290-3000. https://doi.org/10.1016/j.compositesb.2012.05.044.   DOI
21 Jiang, T. and Teng, J.G. (2007), "Analysis-oriented stress-strain models for FRP-confined concrete", Eng. Struct., 29(11), 2968-2986. https://doi.org/10.1016/j.engstruct.2007.01.010.   DOI
22 Lam, L. and Teng, J.G. (2004), "Ultimate condition of fiber reinforced polymer-confined concrete", J. Compos. Constr., 8(6), 539-548. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:6(539).   DOI
23 Karakoc, M.B., Demirboga, R., Turkmen, I. and Can, I. (2012), "Effect of expanded perlite aggregate on cyclic thermal loading of HSC an artificial neural network modeling", Sci. Iran., 19(1), 41-50. https://doi.org/10.1016/j.scient.2011.11.035.   DOI
24 Kono, S., Inazumi, M. and Kaku, T. (1998), "Evaluation of confining effects of CFRP sheets on reinforced concrete members", Proceedings of the 2nd International Conference on Composites in Infrastructure, University of Arizona, Tucson, AZ, USA.
25 Lam, L. and Teng, J.G. (2003), "Design-oriented stress-strain model for FRP-confined concrete", Constr. Build. Mater., 17(6-7), 471-489. https://doi.org/10.1016/S0950-0618(03)00045-X.   DOI
26 Lam, L., Teng, J.G., Cheung, C.H. and Xiao, Y. (2006) "FRP-confined concrete under axial cyclic compression", Cement Concrete Compos., 28(10), 949-958. https://doi.org/10.1016/j.cemconcomp.2006.07.007.   DOI
27 MathWorks (2015), System Identification Toolbox for Matlab (Release 2015b), The MathWorks, Inc., Natick, Massachusetts, United States.
28 Rousakis, T. and Tepfers, R. (2004), "Behavior of concrete confined by high e-modulus carbon FRP sheets, subjected to monotonic and cyclic axial compressive load", Nord. Concrete Res. J., 31(1), 73-82.
29 Youssef, M.N., Feng, M.Q. and Mosallam, A.S. (2007), "Stress-strain model for concrete confined by FRP composites", Compos. B. Eng., 38(5-6), 614-628. https://doi.org/10.1016/j.compositesb.2006.07.020.   DOI
30 Rochette, P. and Labossiere, P. (2000), "Axial testing of rectangular column models confined with composites", J. Compos. Constr., 4(3), 129-136. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(129).   DOI
31 Sadeghian, P. and Fam, A. (2015), "Improved design-oriented confinement models for FRP-wrapped concrete cylinders based on statistical analyses", Eng. Struct., 87, 162-182. https://doi.org/10.1016 /j.engstruct.2015.01.024.   DOI
32 Shahawy, M., Mirmiran, A. and Beitelman, A. (2000), "Test and modeling of carbon-wrapped concrete columns", Compos. B. Eng., 31(6-7), 471-480. https://doi.org/10.1016/S1359-8368(00)00021-4.   DOI
33 Shehata, I.A.E.M., Carneiro, L.A.V. and Shehata, L.C.D. (2002), "Strength of short concrete columns confined with CFRP sheets", Mater. Struct., 35, 50-58. https://doi.org/10.1007/BF02482090.   DOI
34 Shirkhani, A., Davarnia, D. and Azar, B.F. (2019), "Prediction of bond strength between concrete and rebar under corrosion using ANN", Comput. Concrete, 23(4), 273-279. https://doi.org/10.12989/cac. 2019.23.4.273.   DOI
35 Smith, S.T., Kim, S.J. and Zhang, H. (2010), "Behavior and effectiveness of FRP wrap in the confinement of large concrete cylinders", J. Compos. Constr., 14(5), 573-582. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000119.   DOI
36 Modarelli, R., Micelli, F. and Manni, O. (2005), "FRP-confinement of hollow concrete cylinders and prisms", Proceedings of the 7th international symposium on fiber reinforced polymer reinforcement for reinforced concrete structures, NO. SP-230; American Concrete Institute, Farmington, MI, USA.
37 Tabatabaei, R., Sanjari, H.R. and Shamsadini, M. (2014), "The use of artificial neural networks in predicting ASR of concrete containing nano-silica", Comput. Concrete, 13(6), 739-748. http://dx.doi.org/10.12989/cac.2014.13.6.739.   DOI
38 Matthys, S., Taerwe, L. and Audenaert, K. (1999), "Test on axially loaded concrete columns confined by fiber reinforced polymer sheet wrapping", Proceedings of the 4th international symposium on fiber reinforced polymer reinforcement for reinforced concrete structures, Farmington, American Concrete Institute, MI.
39 Micelli, F. and Modarelli R. (2013), "Experimental and analytical sturdy on properties affecting the behaviour of FRP-confined concrete", Compos. B Eng., 45, 1420-1431. https://doi.org/10.1016/j.compositesb.2012.09.055.   DOI
40 Micelli, F., Myers, J.J. and Murthy, S. (2001), "Effect of environmental cycles on concrete cylinders confined with FRP", Proceedings of International Conference on Composites in Constructions, A.A. Balkema Publishers, Lisse, The Netherlands.
41 Oliveira, D.S., Raiz, V. and Carrazedo, R. (2019), "Experimental study on normal-strength, high-strength and ultrahigh-strength concrete confined by carbon and glass FRP laminates", J. Compos. Constr., 23(1), 479-491. 1-15. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000912.   DOI
42 Picher, F. and Rochette, P. (1996), "Labossiere P. Confinement of concrete cylinders with CFRP", Proceedings of the 1st International Conference on Composites for Infrastructures, University of Arizona, Tucson, AZ, USA.
43 Purba, B.K. and Mufti, A.A. (1999), "Investigation of the behavior of cylindrical concrete columns reinforced with carbon fiber reinforced polymer (CFRP) jackets", Can. J. Civil Eng., 26(5), 590-596. https://doi.org/10.1139/l99-022.   DOI
44 Watanable, K., Nakamura, H., Honda, T., Toyoshima, M., Iso, M., Fujimaki, T., Kaneto, M. and Shirai, N. (1997), "Confinement effect of FRP sheet on strength and ductility of concrete cylinders under uniaxial compression", Proceedings of the 3rd International Symposium on Non-metallic FRP Reinforcement for Concrete Structures, Japan Concrete Institute, Sapporo, Japan.
45 Taylor, K.E. (2001), "Summarizing multiple aspects of model performance in a single diagram", J. Geophys. Res. Atmos., 106(D7), 7138-7192. https://doi.org/10.1029/2000JD900719.   DOI
46 Valdmanis, V., De Lorenzis, L., Rousakis, T. and Tepfers, R. (2007), "Behavior and capacity of CFRP-confined concrete cylinders subjected to monotonic and cyclic axial compressive load", Struct. Concrete, 8(4), 187-200.   DOI
47 Wang, L.M. and Wu, Y.F. (2008), "Effect of corner radius on the performance of CFRP-confined square concrete columns: test", Eng. Struct., 30(2), 493-505. https://doi.org/10.1016/j.engstruct.2007.04.016.   DOI
48 Wu, Y.F. and Jiang, J.F. (2013), "Effective strain of FRP for confined cylindrical concrete columns", Compos. Struct., 95, 479-491. https://doi.org/10.1016/j.compstruct.2012.08.021.   DOI
49 Abdelrahman, K. and El-Hacha R. (2012), "Behavior of large-scale concrete columns wrappes with CFRP ans SFRP sheets", J. Compos. Constr., 16(4), 430-439. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000278.   DOI
50 Ahmad, A., Khan, Q.U.Z. and Raza, A. (2020), "Reliability analysis of strength models for CFRP-confined concrete cylinders", Compos. Struct., 244, 112312. https://doi.org/10.1016/j.compstruct.2020.112312.   DOI
51 Behforouz, B., Memarzadeh, P., Eftekhar, M. and Fathi, F. (2020), "Regression and ANN models for durability and mechanical characteristics of waste ceramic powder high performance sustainable concrete", Comput. Concr., 25(2), 119-132. https://doi.org/10.12989/cac.2020.25.2.119.   DOI
52 Aire, C., Gettu, R. and Casas, J.R. (2001), "Study of the compressive behavior of concrete confined by fiber reinforced composites", International Conference on Composites in Constructions, A.A. Balkema Publishers, Lisse, The Netherlands.
53 Akogbe, R.K., Liang, M. and Wu, Z.M. (2011), "Size effect of axial compressive strength of CFRP confined concrete cylinders", Int. J. Concrete Struct. M, 5(1), 49-55. https://doi.org/10.4334/ijcsm.2011.5.1.049.   DOI
54 Alshihri, M.M., Azmy, A.M. and El-Bisy, M.S. (2009), "Neural networks for predicting compressive strength of structural light weight concrete", Constr. Build. Mater., 23, 2214-2219. https://doi.org/10.1016/j.conbuildmat.2008.12.003.   DOI
55 Benzaid, R., Mesbah, H. and Chikh, N.E. (2010), "FRP-confined concrete cylinders: axial compression experiments and strength model", J. Reinf. Plast. Compos., 29(16), 2469-2488. https://doi.org/10.1177/0731684409355199.   DOI
56 Berradia, M. and Kassoul, A. (2018), "Ultimate strength and strain models proposed for CFRP confined concrete cylinders", Steel Compos. Struct., 29(4), 465-481. https://doi.org/10.12989/scs.2018.29.4.465.   DOI
57 Berthet, J.F., Ferrier, E. and Hamelin, P. (2005), "Compressive behavior of concrete externally confined by composite jackets. Part A: Experimental study", Constr. Build Mater., 19(3), 223-232. https://doi.org/10.1016/j.conbuildmat.2004.05.012.   DOI