Browse > Article
http://dx.doi.org/10.12989/cac.2020.26.4.343

Thermal field of large-diameter concrete filled steel tubular members under solar radiation  

Yang, Daigeng (College of Mechanics and Materials, Hohai University)
Chen, Guorong (College of Mechanics and Materials, Hohai University)
Ding, Xiaofei (College of Mechanics and Materials, Hohai University)
Xu, Juncai (Department of Civil Engineering, Case Western Reserve University)
Publication Information
Computers and Concrete / v.26, no.4, 2020 , pp. 343-350 More about this Journal
Abstract
Concrete-filled steel tubular (CFST) members have been widely used in engineering, and their tube diameters have become larger and larger. But there is no research on the thermal field of large-diameter CFST structure. These studies focused on the thermal field of the large-diameter CFST structure under solar radiation. The environmental factors and the actual placement position were considered, and the finite element model (FEM) of the thermal field of CFST members under solar radiation (SR) was established. Then the FEM was verified by practical experiments. The most unfavorable temperature gradient model in the cross-section was proposed. The testing results showed that the temperature field of the large-diameter CFST member section was non-linearly distributed due to the influence of SR. The temperature field results of CFST members with different pipe diameters indicated that the larger the core concrete diameter was, the slower the central temperature changed, and there was a significant temperature difference between the center and the boundary. Based on the numerical model, the most unfavorable temperature gradient model in the section was proposed. The model showed that the temperature difference around the center of the circle is small, and the boundary temperature difference is significant. The maximum temperature difference is 15.22℃, which appeared in the southern boundary area of the specimen. Therefore, it is necessary to consider the influence of SR on the thermal field of the member for large-diameter CFST members in actual engineering, which causes a large temperature gradient in the member.
Keywords
solar radiation; concrete-filled steel tubular; thermal field; temperature gradient; FEM;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Abid, S.R., Mussa, F., Taysi, N. and Ozakca, M. (2018), "Experimental and finite element investigation of temperature distributions in concrete-encased steel girders", Struct. Control Hlth. Monit., 25(1), e2042. https://doi.org/10.1002/stc.2042.   DOI
2 Asamoto, S., Ishida, T. and Maekawa, K. (2006), "Time-dependent constitutive model of solidifying concrete based on thermodynamic state of moisture in fine pores", J. Adv. Concrete Technol., 4(2), 301-323. https://doi.org/10.3151/jact.4.301.   DOI
3 Asamoto, S., Ohtsuka, A., Kuwahara, Y. and Miura, C. (2011), "Study on effects of solar radiation and rain on shrinkage, shrinkage cracking and creep of concrete", Cement Concrete Res., 41(6), 590-601. http://10.1016/j.cemconres.2011.03.003.   DOI
4 Daoud, M., Galanis, N. and Ballivy, G. (1997), "Calculation of the periodic temperature field in a concrete dam", Can. J. Civil Eng., 24(5), 772-784. https://doi.org/10.1139/l97-020.   DOI
5 Del Coz Diaz, J., Nieto, P.G., Rodriguez, A.M., Martinez-Luengas, A.L. and Biempica, C.B. (2006), "Non-linear thermal analysis of light concrete hollow brick walls by the finite element method and experimental validation", Appl. Therm. Eng., 26(8-9), 777-786. http://10.1016/j.applthermaleng.2005.10.012.   DOI
6 Feng, J., Le, L., Hu, Z. and Xue-hui, A. (2008), "Preliminary study on temperature rise property of thermal insulation of rock-fill concrete", Water Res. Hydrop. Eng., 5(39), 59-63. http://doi:10.3969/j.issn.1000-0860.2008.05.017.
7 Gu, B. and Chen, Z.J. (2014), "Temperature gradients in concrete box girder bridge under effect of cold wave", J. Central South Univ., 21(3), 1227-1241. https://doi.org/10.1007/s11771-014-2057-6.   DOI
8 Jin, F., Chen, Z., Wang, J. and Yang, J. (2010), "Practical procedure for predicting non-uniform temperature on the exposed face of arch dams", Appl. Therm. Eng., 30(14-15), 2146-2156. https://doi.org/10.1016/b978-0-12-408083-6.00021-0.   DOI
9 Larsson, O. and Thelandersson, S. (2011), "Estimating extreme values of thermal gradients in concrete structures", Mater. Struct., 44(8), 1491-1500. https://doi.org/10.1617/s11527-011-9714-0.   DOI
10 Lee, J.H. (2011), "Investigation of extreme environmental conditions and design thermal gradients during construction for prestressed concrete bridge girders", J. Bridge Eng., 17(3), 547-556. http://10.1061/(ASCE)BE.1943-5592.0000277.   DOI
11 Lee, J.H. and Kalkan, I. (2012), "Analysis of thermal environmental effects on precast, prestressed concrete bridge girders: temperature differentials and thermal deformations", Adv. Struct. Eng., 15(3), 447-459. https://doi.org/10.1260/1369-4332.15.3.447.   DOI
12 Li, D., Maes, M.A. and Dilger, W.H. (2004), "Thermal design criteria for deep prestressed concrete girders based on data from Confederation Bridge", Can. J. Civil Eng., 31(5), 813-825. http://DOI:10.1139/l04-041.   DOI
13 Liu, Z.Y. and CHEN, B.C. (2008), "Finite element analysis on temperature field of CFST members under solar radiation", J. Highw. Tran. Res. Develop., 7(25), 49-53. http://doi:10.3969/j.issn.1002-0268.2008.07.010.
14 Ni, Y., Zhang, P., Ye, X., Lin, K. and Liao, W. (2011), "Modeling of temperature distribution in a reinforced concrete supertall structure based on structural health monitoring data", Comput. Concrete, 8(3), 293-309. http://10.12989/cac.2011.8.3.293.   DOI
15 Sun, J. and Xie, J. (2019), "Simulation analysis of the hydration heat of large diameter CFST arch and its effects on loading age", Appl. Therm. Eng., 150(1), 482-491. http://10.1016/j.applthermaleng.2019.01.022.   DOI
16 Peng, G., Nakamura, S., Zhu, X., Wu, Q. and Wang, H. (2017), "An experimental and numerical study on temperature gradient and thermal stress of CFST truss girders under solar radiation", Comput. Concrete, 20(5), 605-616. http://10.12989/cac.2017.20.5.605.   DOI
17 Shoukry, S.N., William, G.W., Downie, B. and Riad, M.Y. (2011), "Effect of moisture and temperature on the mechanical properties of concrete", Constr. Build. Mater., 25(2), 688-696. https://doi.org/10.33915/etd.1625.   DOI
18 Song, X., Melhem, H., Li, J., Xu, Q. and Cheng, L. (2016), "Effects of solar temperature gradient on long-span concrete box girder during cantilever construction", J. Bridge Eng., 21(3), 04015061. https://doi.org/10.1061/(asce)be.1943-5592.0000844.   DOI
19 Taysi, N. and Abid, S. (2015), "Temperature distributions and variations in concrete box-girder bridges: Experimental and finite element parametric studies", Adv. Struct. Eng., 18(4), 469-486. https://doi.org/10.1260/1369-4332.18.4.469.   DOI
20 Tian, Z.J., Liu, Y.J., Ma, Y.P. and Liu, J. (2018), "Experiment on temperature distribution of rectangular CFST cross section in severe cold areas", J. Arch. Civil Eng., 35(5), 170-178.
21 Wang, Y., Zhan, Y. and Zhao, R. (2016), "Analysis of thermal behavior on concrete box-girder arch bridges under convection and solar radiation", Adv. Struct. Eng., 19(7), 1043-1059. https://doi.org/10.1177/1369433216630829.   DOI
22 William, G.W., Shoukry, S.N. and Riad, M.Y. (2005), "Early age cracking of reinforced concrete bridge decks", Bridge Struct., 1(4), 379-396. https://doi.org/10.1080/15732480500483828.   DOI
23 Song, Z., Xiao, J. and Shen, L. (2012), "On temperature gradients in high-performance concrete box girder under solar radiation", Adv. Struct. Eng., 15(3), 399-415. https://doi.org/10.1260/1369-4332.15.3.399.   DOI
24 Xia, Y., Chen, B., Zhou, X.Q. and Xu, Y.l. (2013), "Field monitoring and numerical analysis of Tsing Ma Suspension Bridge temperature behavior", Struct. Control Hlth. Monit., 20(4), 560-575. http://10.1002/stc.515.   DOI
25 Xu, J., Huang, L. and Xu, P. (2010). "Optimizing scheme of concrete large dam temperature operation", 2010 International Conference on Management and Service Science, Wuhan, China. http://10.1109/ICMSS.2010.5576730.
26 Xu, J., Ren, Q. and Zhang, S. (2011), "Temperature control and crack prevention of concrete aqueduct during construction", J. Hefei Univ. Technol., 34(4), 553-556. http://10.3969/j.issn.1003-5060.2011.04.018.   DOI
27 Xu, J., Shen, Z., Yang, S., Xie, X. and Yang, Z. (2019), "Finite element simulation of prevention thermal cracking in mass concrete", Int. J. Comput. Sci. Math., 10(4), 327-339. http://10.1504/IJCSM.2019.102691.   DOI
28 Yikici, T.A. and Chen, H.L.R. (2015), "Use of maturity method to estimate compressive strength of mass concrete", Constr. Build. Mater., 95(1), 802-812. https://doi.org/10.1016/j.conbuildmat.2015.07.026.   DOI