Palm oil industry's bi-products as coarse aggregate in structural lightweight concrete |
Huda, Md. Nazmul
(Department of Civil Engineering, Faculty of Engineering, University of Malaya)
Jumaat, Mohd Zamin (Department of Civil Engineering, Faculty of Engineering, University of Malaya) Islam, A.B.M. Saiful (Department of Construction Engineering, College of Engineering, University of Dammam) Darain, Kh Mahfuz ud (Department of Civil Engineering, Faculty of Engineering, University of Malaya) Obaydullah, M. (Department of Civil Engineering, Faculty of Engineering, University of Malaya) Hosen, Md. Akter (Department of Civil Engineering, Faculty of Engineering, University of Malaya) |
1 | Mannan, M. and Neglo, K. (2010), "Mix design for oil-palmboiler clinker (OPBC) concrete", J. Sci. Technol., 30(1). |
2 | Mannan, M.A. and Ganapathy, C. (2002), "Engineering properties of concrete with oil palm shell as coarse aggregate", Constr. Build. Mater., 16(1), 29-34. DOI |
3 | Mehta, P.K. and Monteiro, P.J. (2006), Concrete: Microstructure, Properties, and Materials, McGraw-Hill, New York, U.S.A. |
4 | Mo, K.H., Yap, K.K.Q., Alengaram, U.J. and Jumaat, M.Z. (2014), "The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete", Constr. Build. Mater., 55, 20-28. DOI |
5 | Mohammed, B.S., Al-Ganad, M.A. and Abdullahi, M. (2011), "Analytical and experimental studies on composite slabs utilising palm oil clinker concrete", Constr. Build. Mater., 25(8), 3550-3560. DOI |
6 | Mohammed, B.S., Foo, W. and Abdullahi, M. (2014), "Flexural strength of palm oil clinker concrete beams", Mater. Des., 53, 325-331. DOI |
7 | Mohammed, B.S., Foo, W., Hossain, K. and Abdullahi, M. (2013), "Shear strength of palm oil clinker concrete beams", Mater. Des., 46, 270-276. DOI |
8 | Muda, Z., Sharif, S.F. and Hong, N.J. (2012), "Flexural behavior of lightweight oil palm shells concrete slab reinforced with geogrid", J. Sci. Eng. Res., 3(11), 1-18. |
9 | Neville, A. and Brooks, J. (2008), Concrete Technology, Prentice Hall, Malaysia. |
10 | Neville, A.M. (1995), Properties of Concrete, Pearson Education Limited, England. |
11 | Newman, J. and Owens, P. (2003), Properties of Lightweight Concrete, Butterworth-Heinemann. |
12 | Okafor, F.O. (1988), "Palm kernel shell as a lightweight aggregate for concrete", Cement Concrete Res., 18(6), 901-910. DOI |
13 | Okafor, F.O. (1991), "An investigation on the use of superplasticizer in palm kernel shell aggregate concrete", Cement Concrete Res., 21(4), 551-557. DOI |
14 | Okpala, D. (1990), "Palm kernel shell as a lightweight aggregate in concrete", Build. Envirom., 25(4), 291-296. DOI |
15 | Omar, W. and Mohamed, N. (2002), "The performance of pretensioned prestressed concrete beams made with lightweight concrete", J. Kejurut. Awam, 14(1), 60-70. |
16 | Shafigh, P., Jumaat, M.Z. and Mahmud, H. (2011b), "Oil palm shell as a lightweight aggregate for production high strength lightweight concrete", Constr. Build. Mater., 25(4), 1848-1853. DOI |
17 | Raithby, K. and Lydon, F. (1981), "Lightweight concrete in highway bridges", J. Cement Compos. Light. Concrete, 3(2), 133-146. DOI |
18 | Rossignolo, J.A., Agnesini, M.V. and Morais, J.A. (2003), "Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates", Cement Concrete Compos., 25(1), 77-82. DOI |
19 | Shafigh, P., Jumaat, M., Mahmud, H. and Alengaram, U. (2011a), "A new method of producing high strength oil palm shell lightweight concrete", Mater. Des., 32(10), 4839-4843. DOI |
20 | Shannag, M.J. (2000), "High strength concrete containing natural pozzolan and silica fume", Cement Concrete Compos., 22(6), 399-406. DOI |
21 | ACI Committee 213 (1987), Guide for Structural Lightweight Aggregate Concrete, 64(8). |
22 | Abdullah, A. (1996). "Palm oil shell aggregate for lightweight concrete", Waste Mater. Use. Concrete Manufact., 624-636. |
23 | ACI116R (2000), Cement and Concrete Terminology, 64(8). |
24 | ACI Committee 211.2 (1998), Standard Practice for Selecting Proportions for Structural. Lightweight Concrete, 64(8). |
25 | Ahmed, E. and Sobuz, H.R. (2011). "Flexural and time-dependent performance of palm shell aggregate concrete beam", KSCE J. Civil Eng., 15(5), 859-865. DOI |
26 | Ahmmad, R., Jumaat, M., Bahri, S. and Islam, A.B.M.S. (2014), "Ductility performance of lightweight concrete element containing massive palm shell clinker", Constr. Build. Mater., 63, 234-241. DOI |
27 | Al-Khaiat, H. and Haque, M. (1998), "Effect of initial curing on early strength and physical properties of a lightweight concrete", Cement Concrete Res., 28(6), 859-866. DOI |
28 | Alengaram, J.M.Z. and Mahmud, H. (2008a), "Ductility behaviour of reinforced palm kernel shell concrete beams", Eur. J. Sci. Res., 23(3), 406-420. |
29 | Shetty, M. (2005), Concrete Technology Theory and Practice, 1st Multicolor Illustrative Revised Edition, India. |
30 | Shannag, M.J. (2011), "Characteristics of lightweight concrete containing mineral admixtures", Constr. Build. Mater., 25(2), 658-662. DOI |
31 | Sylva, G., Burns, N. and Breen, J. (2004), "Composite bridge systems with high-performance lightweight concrete", ACI Spec. Publ., 218, 91-100. |
32 | Teo, D., Mannan, M. and Kurian, V. (2006a), "Structural behaviour of singly reinforced OPS beams", APSEC, 5-6. |
33 | Teo, D., Mannan, M.A. and Kurian, J.V. (2006b), "Flexural behaviour of reinforced lightweight concrete beams made with oil palm shell (OPS)", J. Adv. Concrete Technol., 4(3), 459-468. DOI |
34 | Teo, D., Mannan, M.A., Kurian, V. and Ganapathy, C. (2007), "Lightweight concrete made from oil palm shell (OPS): Structural bond and durability properties", Build. Environ., 42(7), 2614-2621. DOI |
35 | Alengaram, U.J., Mahmud, H., Jumaat, M.Z. and Shirazi, S. (2010), "Effect of aggregate size and proportion on strength properties of palm kernel shell concrete", J. Phys. Sci., 5(12), 1848-1856. |
36 | Teo, D., Mannan, M.A. and Kurian, V.J. (2006c), "Structural concrete using oil palm shell (OPS) as lightweight aggregate", Turk. J. Eng. Environ. Sci., 30(4), 251-257. |
37 | Wiegrink, K., Marikunte, S. and Shah, S.P. (1996), "Shrinkage cracking of high-strength concrete", ACI Mater. J., 93(5), 409-415. |
38 | Wilson, H. and Malhotra, V. (1988), "Development of high strength lightweight concrete for structural applications", J. Cement Compos. Light. Concrete, 10(2), 79-90. DOI |
39 | Alengaram, J.M.Z., Mahmud, H. and Fayyadh, M.M. (2011), "Shear behaviour of reinforced palm kernel shell concrete beams", Constr. Build. Mater., 25(6), 2918-2927. DOI |
40 | Alengaram, U., Jumaat, M. and Mahmud, H. (2008b), "Influence of cementitious materials and aggregates content on compressive strength of palm kernel shell concrete", J. Appl. Sci., 8(18), 3207-3213. DOI |
41 | Basri, H., Mannan, M. and Zain, M. (1999), "Concrete using waste oil palm shells as aggregate", Cement Concrete Res., 29(4), 619-622. DOI |
42 | BS8110 (1997), Structural Use of Concrete, Part I: Code of Practice for Design and Construction. |
43 | CEB/FIP (1977), Lightweight Aggregate Concrete, CEB-FIP Manual of Design and Technology, The Construction Press, London, U.K. |
44 | Chandra, S. and Berntsson, L. (2002), Lightweight Aggregate Concrete, Elsevier. |
45 | Chen, B. and Liu, J. (2005), "Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability", Cement Concrete Res., 35(5), 913-917. DOI |
46 | Choong, M.Y. (2012), "Waste not the palm oil biomass", Star Online. |
47 | Gesoglu, M., Ozturan, T. and Guneyisi, E. (2004), "Shrinkage cracking of lightweight concrete made with cold-bonded fly ash aggregates", Cement Concrete Res., 34(7), 1121-1130. DOI |
48 | Hilton, M., Mohd, S. and Mohd Noor, N. (2007), Mechanical Properties of Palm Oil Clinker Concrete. |
49 | Salam, S., Ali, A. and Abdullah, A. (1985), "Lightweight concrete using oil palm shells as aggregates", IPMKSM. |
50 | Neville, A. (2008), Properties of concrete CTP-VVP, Malaysia. |
51 | Huda, M.N., Jumat, M.Z.B. and Islam, A.B.M.S. (2016), "Flexural performance of reinforced oil palm shell & palm oil clinker concrete (PSCC) beam", Constr. Build. Mater., 127, 18-25. DOI |
52 | Holm, T.A. and Bremner, T.W. (2000), State-of-the-Art Report on High-Strength, High-Durability Structural Low-Density Concrete for Applications in Severe Marine Environments, US Army Corps of Engineers, Engineer Research and Development Center. |
53 | Hossain, K.M.A. (2004), "Properties of volcanic pumice based cement and lightweight concrete", Cement Concrete Res., 34(2), 283-291. DOI |
54 | Huda, M.N., Jumaat, M.Z., Islam, A.B.M.S. and Soeb, M.R. (2015), "Ductility performnce of high strength lightweight concrete produced from a mixture of oil palm shell and palm oil clinker", Proceedings of the 1st International Conference on Advances in Civil Infrastructure and Construction Materials, Dhaka, Bangladesh, December. |
55 | Huda, M.N., Jumaat, M.Z., Islam, A.B.M.S. and Soeb, M.R. (2016), "Influence of palm oil factory wastes as coarse aggregate species for high performance lightweight concrete", Revista de la Construccion, 15(3), 133-139. DOI |
56 | Hussein, S.H., Mustapha, K., Muda, Z.C. and Budde, S. (2012), "Modelling of ultimate load for lightweight palm oil clinker reinforced concrete beams with web openings using response surface methodology", J. Civil Eng. Technol., 3(1), 33-44. |
57 | Jumaat, M.Z., Alengaram, U.J., Ahmmad, R., Bahri, S. and Islam, A.B.M.S. (2015), "Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature", Constr. Build. Mater., 101(1), 942-951. DOI |
58 | Kilic, A., Atis, C.D., Yasar, E. and O zcan, F. (2003), "Highstrength lightweight concrete made with scoria aggregate containing mineral admixtures", Cement Concrete Res., 33(10), 1595-1599. DOI |
59 | Jumaat, M.Z., Alengaram, U.J. and Mahmud, H. (2009), "Shear strength of oil palm shell foamed concrete beams", Mater. Des., 30(6), 2227-2236. DOI |
60 | Kanadasan, J. and Razak, H.A. (2014), "Mix design for selfcompacting palm oil clinker concrete based on particle packing", Mater. Des., 56, 9-19. DOI |
61 | Kosmatka, S.H., Panarese, W.C. and Association, P.C. (2002), Design and Control of Concrete Mixtures. |
62 | Koya, O. and Fono, T. (2009), Palm Kernel Shell in the Manufacture of Automotive Brake Pad: Technoexpo. |
63 | Lo, C.H. and Li, Z. (2004), "Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete", Waste Manage., 24(4), 333-338. DOI |
64 | Lopez, M., Kurtis, K. and Kahn, L. (2006), "Pre-wetted lightweight coarse aggregate reduces long-term deformations of high-performance lightweight concrete", ACI Spec. Publ., 234. |
65 | Mannan, M., Alexander, J., Ganapathy, C. and Teo, D. (2006), "Quality improvement of oil palm shell (OPS) as coarse aggregate in lightweight concrete", Build. Environ., 41(9), 1239-1242. DOI |
66 | Mannan, M. and Ganapathy, C. (2001a), "Long-term strengths of concrete with oil palm shell as coarse aggregate", Cement Concrete Res., 31(9), 1319-1321. DOI |
67 | Mannan, M. and Ganapathy, C. (2001b), "Mix design for oil palm shell concrete", Cement Concrete Res., 31(9), 1323-1325. DOI |
68 | Mannan, M. and Ganapathy, C. (2004). "Concrete from an agricultural waste-oil palm shell (OPS)", Build. Environ., 39(4), 441-448. DOI |