1 |
Kwan, A.K.H. and McKinley, M. (2014), "Packing density and filling effect of limestone fines", Adv. Concrete Constr., 2(3), 209-227.
DOI
|
2 |
Kumar, A., Oey, T., Falla, G.P., Henkensiefken, R., Neithalath, N. and Sant, G. (2013), "A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials", Constr. Build. Mater., 43, 428-435.
DOI
|
3 |
Mala, K., Mullick, A.K., Jain, K.K. and Singh, P.K. (2013), "Effect of relative levels of mineral admixtures on strength of concrete with ternary cement blend", Int. J. Concrete Struct. Mater., 7(3), 239-249.
DOI
|
4 |
Meddah, M.S., Lmbachiya, M.C. and Dhir, R.K. (2014), "Potential use of binary and composite limestone cements in concrete production", Constr. Build. Mater., 58, 193-205.
DOI
|
5 |
Mofarrah, A. and Husain, T. (2013), "Use of heavy oil fly ash as a color ingredient in cement mortar", Int. J. Concrete Struct. Mater., 7(2), 111-117.
DOI
|
6 |
Ramezanianpour, A.A. and Ghiasvand, E., Nickseresht, I., Mahdikhani, M. and Moodi, F. (2009), "Influence of various amounts of limestone powder on performance of Portland limestone cement concretes", Cement Concrete Comp., 31(10), 715-720.
DOI
|
7 |
Shaikh, F.U.A. and Supit, S.W.M. (2015), "Compressive strength and durability properties of high volume fly ash (HVFA) concretes containing ultrafine fly ash (UFFA)", Constr. Build. Mater., 82, 192-205.
DOI
|
8 |
Shon, C.S., Kim, Y,S. and Jeong, J.D. (2003), "ASR resistance of ternary cementitious systems containing silica fume-fly ash using modified ASTM C 1260 method", J. Korea Concrete Institute, 15(3), 497-503.
DOI
|
9 |
Vance, K., Aguayo, M., Oey, T., Sant, G. and Neithalath, N. (2013), "Hydration and strength development in ternary Portland cement blends containing limestone and fly ash or metakaolin", Cement Concrete Comp., 39, 93-103.
DOI
|
10 |
Weerdt, K.D., Kjellsen, K.O., Sellevold, E. and Justnes, H. (2011), "Synergy between fly ash and limestone powder in ternary cements", Cement Concrete Comp., 33(1), 30-38.
DOI
|
11 |
Zhu, B. (2014), Thermal Stresses and Temperature Control of Mass Concrete, Elsevier Incorporation, Tsinghua University Press.
|
12 |
Atis, C.D. (2002), "Heat evolution of high-volume fly ash concrete", Cement Concrete Res., 32(5), 751-756.
DOI
|
13 |
ACI Committee 318 (2011), ACI 318-11: Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, MI, USA.
|
14 |
Alhozaimy, A, Fares, G, Alawad, O.A. and Al-Negheimish, A. (2015), "Heat of hydration of concrete containing powdered scoria rock as a natural pozzolanic material", Constr. Build. Mater., 81, 113-119.
DOI
|
15 |
American Society for Testing and Materials (2004), ASTM C150-04: Standard Test Methods for Portland Cement, ASTM International, West Conshohocken, PA, USA.
|
16 |
Bentz, D.P. (2005), "Replacement of "coarse" cement particles by inert fillers in low w/c ratio concretes; II: experimental validation", Cement Concrete Res., 35(1), 185-188.
DOI
|
17 |
Bentz, D.P., Irassar, E.F., Bucher, B. and Weiss, W.J. (2009), "Limestone fillers conserve cement in low w/cm concretes; an analysis based on Powers' model", Concrete Int., 31(11), 41-46.
|
18 |
De Weerdt, K., Sellevold, E., Kjellsen, K.O. and Justnes, H. (2011), "Fly ash-limestone ternary cement: Effect of component fineness", Adv. Cement Res., 23(4), 203-214.
DOI
|
19 |
Kim, J.K., Kim, K.H. and Yang, J.K. (2001), "Thermal analysis of hydration heat in concrete structures with pipe-cooling system", Comput. Struct., 79(2), 163-171.
DOI
|
20 |
Kocak, Y. and Nas, S. (2014), "The effect of using fly ash on the strength and hydration characteristics of blended cements", Constr. Build. Mater., 73, 25-32.
DOI
|
21 |
Korea Concrete Institute (2009), Standard Concrete Specification, Seoul, Korea.
|