1 |
ANSYS Commands Reference (2005), ANSYS, Inc. Southpointe, 275 Technology Drive, Canonsbury, PA 15317, http:/www.ansys.com.
|
2 |
Buckhouse, E.R. (1997), "External Flexural Reinforcement of Existing Reinforced Concrete Beams Using Bolted Steel Channels", Master's Dissertation, Marquette University, Milwaukee, Wisconsin.
|
3 |
Dahmani, L., Khennane, A. and Kaci, S. (2010), "Crack identification in reinforced concrete beams using ANSYS software", Strength. Mater., 42(2), 232-240.
DOI
|
4 |
Elavenil, S. and Chandrasekar, V. (2007), "Analysis of reinforced concrete beams strengthened with feffocement", Int. J. Appl. Eng. Res., 2(3), 431-440.
|
5 |
Vasudevan, G. and Kothandaraman, S. (2011b), "Parametric study on nonlinear finite element analysis on flexural behaviour of RC beams using ANSYS", Int. J. Civil. Struct. Eng., 2(1), 98-111.
|
6 |
Vasudevan, G. and Kothandaraman, S. (2014), "Experimental investigation on the performance of RC beams strengthened with external bars at soffit", Mater. Struct., 47(10), 1617-1631.
DOI
|
7 |
Wolanski, A.J. (2004), "Flexural behaviour of reinforced and pre-stressed concrete beams using finite element analysis", Master's Dissertation, Marquette University, Wisconsin.
|
8 |
IS 456 (2000), Indian Standard: Plain and reinforced concrete-code of practice, Bureau of Indian Standards, New Delhi.
|
9 |
Fanning, P. (2001), "Nonlinear models of reinforced and post-tensioned concrete beams", Electron. J. Strnct. Eng., 2, 111-119.
|
10 |
Hassan, T. and Rizkalla, S. (2003), "Investigation of bond in concrete structures strengthened with near surface mounted carbon fiber reinforced polymer strips", ASCE. J. Compos. Construct., 7(3), 248-257.
DOI
|
11 |
Kachlakev, D., Miller, T., Chansawat, K., Potisuk, T. and Yim, S. (2001), "Finite element modeling of reinforced concrete structures strengthened with FRP laminates", SPR 316, Oregon Dept of transportation - Research Group, Salem, OR 97301-5192 and Federal Highway Administration, Washington, DC.
|
12 |
Kothandaraman, S. and Vasudevan, G. (2010), "Flexural retrofitting of RC beams using external bars at soffit level - an experimental study", Construct. Build. Mater., 24(11), 2208-2216.
DOI
|
13 |
Thomsen, H., Spacone, E., Limkatanyu, S. and Camata, G. (2004), "Failure mode analyses of reinforced concrete beams strengthened in flexure with externally bonded fiber-reinforced polymers", ASCE. J. Compos. Constrnct., 8(2),123-131.
DOI
|
14 |
Vasudevan, G. and Kothandaraman, S. (2011a), "Modeling and simulation of RC beams using ANSYS by APDL batch mode approach", Data. Min. Knowl. Eng., 3(11), 705-709.
|
15 |
Sallam, H.E.M., Badawy, A.A., Balaha, M.M., Khalil, H.S.E. and El-Emam, H.M.I. (2009), "Finite element analysis of peeling failure in strengthened RC beams by CFRP Plates", Egypt. Int. J. Eng. Sci. Technol., 12(2), 25-36.
|