Browse > Article
http://dx.doi.org/10.12989/cac.2015.16.2.223

Instantaneous and time-dependent flexural cracking models of reinforced self-compacting concrete slabs with and without fibres  

Aslani, Farhad (Centre for Infrastructure Engineering and Safety, School of Civil and Environmental Engineering, University of New South Wales)
Nejadi, Shami (School of Civil and Environmental Engineering, University of Technology Sydney)
Samali, Bijan (Institute for Infrastructure Engineering, University of Western Sydney)
Publication Information
Computers and Concrete / v.16, no.2, 2015 , pp. 223-243 More about this Journal
Abstract
Self-compacting concrete (SCC) can be placed and compacted under its own weight with little or no compaction. It is cohesive enough to be handled without segregation or bleeding. Modifications in the mix design of SCC may significantly influence the material's mechanical properties. Therefore, it is vital to investigate whether all the assumed hypotheses about conventional concrete (CC) are also valid for SCC structures. The aim in this paper is to develop analytical models for flexural cracking that describe in appropriate detail the observed cracking behaviour of the reinforced concrete flexural one way slabs tested. The crack width and crack spacing calculation procedures outlined in five international codes, namely Eurocode 2 (1991), CEB-FIP (1990), ACI318-99 (1999), Eurocode 2 (2004), and fib-Model Code (2010), are presented and crack widths and crack spacing are accordingly calculated. Then, the results are compared with the proposed analytical models and the measured experimental values, and discussed in detail.
Keywords
self-compacting concrete; crack width; crack spacing; flexural cracking; time-dependent cracking; analytical models;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 CEB-FIP. (1990), "High-strength Concrete State of the Art Report", Thomas Telford, London.
2 Chiaia, B., Fantilli, A.P. and Vallini, P. (2008), "Crack patterns in reinforced and fiber reinforced concrete structures", Open. Constr. Build. Technol. J., 2,146-155.   DOI
3 Eurocode 2. British Standards Institution, (1991), "Design of concrete structures-Part 1: General rules and rules for buildings", DD ENV 1991-1-1:1991. European Committee for Standardization, Brussels.
4 Eurocode 2. British Standards Institution, (2004), "Design of concrete structures-Part 1-1: General rules and rules for buildings", BS EN 1992-1-1:2004. European Committee for Standardization, Brussels.
5 Fib model code. (2010), "First complete draft Volume 1, fib Bulletin 55".
6 Gergely, P. and Lutz, L.A. (1968), "Maximum crack width in reinforced concrete flexural members", Causes, Mechanism, and Control of Cracking in Concrete , SP-20, American Concrete Institute, Detroit, 87-117.
7 Gilbert, R.I. and Nejadi, S. (2004), "An experimental study of flexural cracking in reinforced concrete members under sustained loads", UNICIV Report No. R-435, School of Civil and Environmental Engineering, University of New South Wales, Sydney, Australia.
8 Gilbert, R.I. and Ranzi, G. (2011), "Time-dependent Behaviour of Concrete Structures", Spon Press, New York.
9 Gribniak, V., Kaklauskas, G., Kliukas, R. and Jakubovskis, R. (2013), "Shrinkage effect on short-term deformation behavior of reinforced concrete-when it should not be neglected", Mater. Design., 51, 1060-1070.   DOI
10 Leutbecher, T. (2007), "Rissbildung und Zugtragverhalten von mit Stabstahl und Fasern bewehrtem Ultrahochfesten Beton (UHPC)", Doktors der Ingebieurwissenschaften genehmigte Dissertation, der Universitat Kassel.
11 Leutbecher, T. and Fehling, E. (2008), "Crack Formation and Tensile Behaviour of UHPC Reinforced with a Combination of Rebars and Fibres", (Eds., Schmidt, M., Fehling, E., Sturwald, S.) Ultra High Performance Concrete (UHPC), Proceedings of the Second International Symposium on Ultra High Performance Concrete Structural Materials and Engineering Series, 10, 497-504.
12 Mari, A.R. Bairan, J.M. and Duarte, N. (2010), "Long-term deflections in cracked reinforced concrete flexural members", Eng. Struct., 32(3), 829-842   DOI
13 Marti, P., Alvarez, M., Kaufmann, W. and Sigrist, V. (1998), "Tension chord model for structural concrete", Struct. Eng. Int., 8(4), 287-298.   DOI
14 Mazzotti, C. and Savoia, M. (2009), "Long-term deflection of reinforced self-consolidating concrete beams", ACI . Struct. J., 6(6), 772-781.
15 Nejadi, S. (2005), "Time-dependent cracking and crack control in reinforced concrete structures", Ph.D Thesis, The University of New South Wales.
16 RILEM TC 162-TDF. (2002), "Test and design methods for steel fibre reinforced concrete", Final recommendations, Mater. Struct., 35, 579-582.
17 Vasanelli, E., Micelli, F., Aiello, M.A. and Plizzari, G. (2013), "Long term behavior of FRC flexural beams under sustained load", Eng. Struct., 56, 1858-1867.   DOI
18 Aslani, F. (2013), "Effects of specimen size and shape on compressive and tensile strengths of self-compacting concrete with or without fibers", Mag. Concrete. Res., 65(15), 914-929.   DOI
19 ACI318-99 (1999), "Building code requirements for structural concrete", ACI 318-99, Detroit, American Concrete Institute.
20 AS 3600 (2009), "Concrete structures", Australian Standards.
21 Aslani, F. (2014), "Experimental and numerical study of time-dependent behaviour of reinforced self-compacting concrete slabs", Ph.D Thesis, University of Technology, Sydney.
22 Aslani, F. (2015), "Creep behaviour of normal-and high-strength self-compacting concrete", Struct. Eng. Mech., 53(5), 921-938.   DOI
23 Aslani, F. and Nejadi, S. (2012a), "Mechanical properties of conventional and self-compacting concrete: an analytical study", Constr. Build. Mater., 36, 330-347.   DOI   ScienceOn
24 Aslani, F. and Nejadi, S. (2012b), "Bond characteristics of steel fibre reinforced self-compacting concrete", Can. J. Civil. Eng., 39(7), 834-848.   DOI   ScienceOn
25 Aslani, F. and Nejadi, S. (2013a), "Self-compacting concrete incorporating steel and polypropylene fibers: compressive and tensile strengths, moduli of elasticity and rupture, compressive stress-strain curve and energy dissipated under compression", Compos. Part. B - Eng., 53, 121-133.   DOI   ScienceOn
26 Aslani, F. and Nejadi, S. (2012c), "Bond behavior of reinforcement in conventional and self-compacting concrete", Adv. Struct. Eng., 15(12), 2033-2051.   DOI
27 Aslani, F. and Nejadi, S. (2012d), "Shrinkage behavior of self-compacting concrete", J. Zhejiang. Univ. Sci. A., 13(6), 407-419.   DOI
28 Aslani, F. and Nejadi, S. (2012e), "Bond characteristics of reinforcing steel bars embedded in self-compacting concrete", Aust. J. Struct. Eng., 13(3), 279-295.
29 Aslani, F. and Nejadi, S. (2013b), "Creep and shrinkage of self-compacting concrete with and without fibers", J. Adv. Concr. Technol., 11(10), 251-265.   DOI
30 Aslani, F., Nejadi, S. and Samali, B. (2014a), "Short term bond shear stress and cracking control of reinforced self-compacting concrete one way slabs under flexural loading", Comput. Concrete., 13(6), 709-737.   DOI
31 Aslani, F., Nejadi, S. and Samali, B. (2014b), "Long-term flexural cracking control of reinforced self-compacting concrete one way slabs with and without fibres", Comput. Concrete., 14(4), 419-443.   DOI
32 Bishoff, P.H. (2003), "Tension stiffening and cracking of steel fiber reinforced concrete", J. Mater. Civil. Eng., 15(2), 174-182.   DOI
33 Broms, B.B. and Lutz, L.A. (1965), "Effects of arrangement of reinforcement on crack width and spacing of reinforced concrete members", ACI. J. Proc., 62(11), 1395-1410.