1 |
Park, R. (1964), "Tensile membrane behavior of uniformly loaded rectangular reinforced concrete slabs with fully restrained edges", Mag. Conc. Res., 16(40), 39-44.
DOI
|
2 |
Corley, W.G. (2004), "Lesson learned on improving resistance of buildings to terrorist attacks", J. Perform. Construct. Facil., ASCE, 18(2), 68-78.
DOI
ScienceOn
|
3 |
DOD (2010), Unified Facilities Criteria, Design of Buildings to Resist Progressive Collapse, US Department of Defense, Washington DC, USA.
|
4 |
Ellingwood, B., Smilowitz, R., Dusenberry, D., Duthinh, D. and Carino, J.N. (2007), BestPractices for Reducing the Potential for Progressive Collapse in Buildings, National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce, USA.
|
5 |
Abaqus INC (2010), Standard User's Manual, 6.9 Edition.
|
6 |
ACI 318 (2011), Building Code Requirements for Structural Concrete, ACI 318-11, American Concrete Institute, Committee 318, USA.
|
7 |
Fib (2001), Punching of Structural Concrete Slabs, fib bulletin 12, Federation Internationale du Beton, Lausanne, Switzerland.
|
8 |
GSA (2003), Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, General Services Administration, USA.
|
9 |
Guandalini, S. (2005), Poinconnement Symetrique des Dalles en Beton Arme, These de doctorat, N. 3380, Lausanne, Switzerland.
|
10 |
Guandalini, S., Burdet, O, and Muttoni, A. (2009), "Punching tests of slabs with low reinforcement ratios", ACI Struct. J., 106(1), 87-95.
|
11 |
Hewitt, B.E. and Batchelor, B. (1975), "A punching shear strength of restrained slabs", J. Struct. Div., ASCE, 101(9), 1837-1853.
|
12 |
Jelic, I., Pavlovic, M.N., Kotsovos, M.D. (1999), "A study of dowel action in reinforced concrete beams", Mag. Concr. Res., 2(2), 131-141.
|
13 |
Kaminetzky, D. (1991), Design and Construction Failures Lessons from Forensic Investigations, McGraw-Hill, USA.
|
14 |
Sasani, M., Bazan, M. and Sagiroglu, S. (2007), "Experimental and analytical progressive collapse evaluation of actual reinforced concrete structure", ACI Struct. J., 104(6), 731-739.
|
15 |
Sasani, M. and Sagiroglu, S. (2008), "Progressive collapse of reinforced concrete structures: a multihazard perspective", ACI Struct. J., 105(1), 96-103.
|
16 |
Schousboe, I. (1976), "Bailey's crossroads collapse reviewed", J. Construct. Div., ASCE, 102(CO2), 365-378.
|
17 |
Sozen, M.A., Corley, W.G., Mlakar, P.F. and Thornton, C.H. (1998), "The Oklahoma city bombing: structural details and possible mechanisms for the Murrah building", J. Perform. Construct. Facil. , 12(3), 120-136.
DOI
ScienceOn
|
18 |
Theodorakopoulosa, D.D. and Swamy, R.N. (2002), "Ultimate punching shear strength analysis of slab-column connections", Cement Concrete Compos., Special Theme Issue, 24(6), 509-521.
DOI
ScienceOn
|
19 |
Valipour, H.R. and Foster, S.J. (2010), "Nonlinear analysis of 3D reinforced concrete frames: effect of section torsion on global response", Struct. Eng. Mech., 36(4), 421-445.
DOI
ScienceOn
|
20 |
Weerheijm, J., Mediavilla, J. and Van Doormaal, J.C.A.M. (2009), "Explosive loading of multi-story RC buildings: Dynamic response and progressive collapse", Struct. Eng. Mech., 32(2), 193-212.
DOI
ScienceOn
|
21 |
Yuan W.F. and Tan K.H. (2011), "Modeling of progressive collapse of a multi-story structure using a spring-mass-damper system", Struct. Eng. Mech., 37(1), 79-93.
DOI
ScienceOn
|
22 |
King, S. and Delatte, N.J. (2004), "Collapse of 2000 commonwealth avenue: punching shear case study", Perform. Construct. Facil. ASCE, 18(1), 54-61.
DOI
ScienceOn
|
23 |
Kinnunen, S. and Nylander, H. (1960), Punching of Concrete Slabs Without Shear Reinforcement, Transactions of the Royal Institute of Technology, No. 158, Stockholm, Sweden.
|
24 |
ASCE 7 (2010), Minimum Design Loads for Buildings and Other Structures, ASCE, SEI/ASCE-7, USA
|
25 |
ACI 349 (2001), Code Requirements for Nuclear Safety Related Concrete Structures, ACI 349-01, American Concrete Institute, USA.
|
26 |
ACI 352.1R-11 (2011), Guide for Design of Slab-Column Connections in Monolithic Concrete Structures, ACI Committee 352, American Concrete Institute, USA.
|
27 |
Joint ACI-ASCE Committee 426 (1974), Shear strength of reinforced concrete members-slabs, Proceedings of ASCE, 100 (ST8).
|
28 |
Masoero, E., Wittel, F.K., Herrmann, H.J. and Chiaia, B.M. (2010), "Progressive collapse mechanisms of brittle and ductile framed structures", J. Eng. Mech., ASCE, 136(8), 987-995.
DOI
ScienceOn
|
29 |
Knoll, F. and Vogel, T. (2009), Design for Robustness, Structural Engineering Documents 11, IABSE-AIPC-IVBH, Switzerland.
|
30 |
Long, A.E. (1975), "A two-phase approach to the prediction of the punching strength of slabs", ACI Struct. J., 72(2), 37-45.
|
31 |
Melo, G.S. and Regan, P.E. (1998), "Post-punching resistance of connections between flat slabs and interior columns", Mag. Conc. Res., 50(4), 319-327.
DOI
ScienceOn
|
32 |
Mirzaei, Y. (2010), Post-Punching Behavior of Reinforced Concrete Slabs, EPFL Thesis No. 4613, Lausanne, Switzerland.
|
33 |
Mullers, I. (2007), "Zur Robustheit im Hochbau: Stutzenausfall als Gefahrdungsbild fur Stahlbetontrag-werke", Ph.D. Thesis, ETH, Zurich, Switzerland.
|
34 |
Mirzaei, Y. and Muttoni, A. (2008), Tests of the Post-Punching Behavior of the Reinforced Concrete Flat Slabs, IS-BETON, Lausanne, Switzerland.
|
35 |
Mitchell, D. and Cook, W.D. (1984), "Preventing progressive collapse of slab structures", J. Struct. Eng., ASCE, 110(7), 1513-1532.
DOI
ScienceOn
|
36 |
Muttoni, A. (2008), "Punching shear strength of reinforced concrete slabs without transverse reinforcement", ACI Struct. J., 105(4), 440-450.
|
37 |
Muttoni, A. and Fernandez, R.M. (2008), "Shear strength of members without transverse reinforcement as function of critical shear crack width", ACI Struct. J., 105(2), 163-172.
|
38 |
Carino, N.J., Woodward, K.A., Leyendecker, E.V. and Fattal S.G. (1983), "A review of the Skyline Plaza collapse", Concr. Int., 5(7), 35-42.
|
39 |
Bao, Y., Kunnath, S.K., El-Tawil, S.H. and Lew, H.S. (2008), "Macromodel-based simulation of progressive collapse: RC frame structures", J. Struct. Eng., 134(7), 1079-1091.
DOI
ScienceOn
|