1 |
Aprile, A., Spacone, E. and Limkatanyu, S. (2001), "Role of bond in RC beams strengthened with steel and FRP plates", J. Struct. Eng. - ASCE, 127(12), 1445-1452.
DOI
ScienceOn
|
2 |
Antoniades, K.K., Salonikios, T.N. and Kappos, A.J. (2003), "Cyclic tests on seismically damaged reinforced concrete walls strengthened using fiber-reinforced polymer reinforcement", ACI Struct. J., 100(4), 510-518.
|
3 |
Antoniades, K.K., Salonikios, T.N. and Kappos, A.J. (2005), "Tests on seismically damaged reinforced concrete walls repaired and strengthening using fiber-reinforced polymers", J. Compos. Constr. - ASCE, 9(3), 236-246.
DOI
ScienceOn
|
4 |
Arduini, M., Di Tommaso, A. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams", ACI Struct. J., 94(4), 363-370.
|
5 |
Collins, M.P. and Porasz, A. (1989), "Shear design for high strength concrete", CEB Bulletin d'Information No. 193 - Design aspects of concrete, 75-83.
|
6 |
Cortes-Puentes, W.L. (2009), "Nonlinear modelling and analysis of repaired and retrofitted shear walls", M.A.Sc. Thesis, Department of Civil Engineering, University of Ottawa, Ottawa, Canada, 226pp.
|
7 |
Eligehausen, R., Popov, E. and Bertero, V. (1983), "Local bond stress-slip relationship of deformed bars under generalized excitations", Report No. UCB/EERC-83/23, Earthquake Engineering Center, University of California, Berkeley.
|
8 |
Elnashai, A.S. and Salama, A.I. (1992), "Selective repair and retrofitting techniques for RC structures in seismic regions", Research Report ESEE/92-2, Engineering Seismology and Earthquake Engineering Section, Imperial College, London, England.
|
9 |
Elnashai, A.S. and Pinho, R. (1998), "Repair and retrofitting of RC walls using selective techniques", J. Earthq. Eng., 2(4), 525-568.
|
10 |
Fiorato, A.E., Oesterle, R.G. and Corley, W.G. (1983), "Behavior of earthquake resistant structural walls before and after repair", J. Am. Concrete I., September-October 1983, 403-413.
|
11 |
He, X.G. and Kwan, A.K.H. (2001), "Modeling dowel action of reinforcement bars for finite element analysis of concrete structures", Comput. Struct., 79(6), 595-604.
DOI
ScienceOn
|
12 |
Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1969), "Behavior of concrete under biaxial stress", J. Am. Concrete I., 66(8), 656-666.
|
13 |
Li, Z.J., Balendra, T., Tan, K.H. and Kong, K.H. (2005), "Finite element modeling of cyclic behaviour of shear wall structure retrofitted using GFRP", SP-230: 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures, ACI, 2005, 1305-1324.
|
14 |
Popovics, S. (1973), "A numerical approach to the complete stress-strain curve of concrete", Cement Concrete Res., 3(5), 583-599.
DOI
ScienceOn
|
15 |
Palermo, D. and Vecchio, F.J. (2003), "Compression field modeling of reinforced concrete subjected to reversed loading: formulation", ACI Struct. J., 100(5), 616-625.
|
16 |
Palermo, D. and Vecchio, F.J. (2007), "Simulation of cyclically loaded concrete structures based on the finiteelement method", J. Struct. Eng. - ASCE, 133(5), 728-738.
DOI
ScienceOn
|
17 |
Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", J. Struct. Eng. - ASCE, 108 (4), 929-950.
|
18 |
Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1928), "A study of the failure of concrete under combined compressive stresses", Bulletin No.185, University of Illinois Engineering Experimental Station, Urbana, Illinois, 104pp.
|
19 |
Salonikios, T.N., Kappos, A.J., Tegos, I.A. and Penelis, G.G. (1999), "Cyclic load behavior of low-slenderness reinforced concrete walls: design basis and test results", ACI Struct. J., 96(4), 649-660.
|
20 |
Sato, Y. and Vecchio, F.J. (2003), "Tension stiffening and crack formation in reinforced concrete members with fiber-reinforced polymer sheets", J. Struct. Eng. - ASCE, 129(6), 717-724.
DOI
ScienceOn
|
21 |
Seckin, M. (1981), "Hysteretic behaviour of cast-in-place exterior beam-column-slab subassemblies", Ph.D. Thesis, Department of Civil Engineering, University of Toronto, Toronto, Canada, 266pp.
|
22 |
Smith, G.M. and Young, L.E. (1955), "Ultimate theory in flexure by exponential function", J. Am. Concrete I., 52(11), 349-359.
|
23 |
Taghdi, M., Bruneau, M. and Saatcioglu, M. (2000a), "Analysis and design of low-rise masonry and concrete walls retrofitted using steel strips", J. Struct. Eng. - ASCE, 126(9), 1026-1032.
DOI
ScienceOn
|
24 |
Taghdi, M., Bruneau, M. and Saatcioglu, M. (2000b), "Seismic retrofitting of low-rise masonry and concrete walls using steel strips", J. Struct. Eng. - ASCE, 126(9), 1017-1025.
DOI
ScienceOn
|
25 |
Vecchio, F.J. (2000b), "Disturbed stress field model for reinforced concrete: formulation", J. Struct. Eng. - ASCE, 126(9), 1070-1077.
DOI
ScienceOn
|
26 |
Vecchio, F.J. (1992), "Finite element modeling of concrete expansion and confinement", J. Struct. Eng. - ASCE, 118(9), 46-56.
|
27 |
Vecchio, F.J. (1999), "Towards cyclic load modelling of reinforced concrete", ACI Struct. J., 96(2), 193-202.
|
28 |
Vecchio, F.J. (2000a), "Analysis of shear-critical reinforced concrete beams", ACI Struct. J., 97(1), 102-110.
|
29 |
Vecchio, F.J. and Bucci, F. (1999), "Analysis of repaired concrete structures", J. Struct. Eng. - ASCE, 125(6), 644-652.
DOI
|
30 |
Vecchio, F.J. and Collins, M.P. (1986), "The modified compression-field theory for reinforced concrete elements subjected to shear", J. Am. Concrete I., 83(2), 219-231.
|
31 |
Vecchio, F.J. and Collins, M.P. (1993), "Compression response of cracked reinforced concrete", J. Struct. Eng. - ASCE, 119(12), 3590-3610.
DOI
ScienceOn
|
32 |
Vecchio, F.J. and Lai, D. (2004), "Crack shear-slip in reinforced concrete elements", J. Adv. Concrete Technol., 2(3), 289-300.
DOI
ScienceOn
|
33 |
Vintzeleou, E.N. and Tassios, T.P. (1987), "Behavior of dowels under cyclic deformations", ACI Struct. J., 84(1), 18-30.
|
34 |
Wong, P.S. and Vecchio, F.J. (2002), "VecTor2 and formworks user's manual", Technical Report, Civil Engineering, University of Toronto, Toronto, Canada.
|