Browse > Article
http://dx.doi.org/10.12989/cac.2011.8.2.229

Variables affecting strain sensing function in cementitious composites with carbon fibers  

Baeza, F.J. (Dpto. de Ingenieria de la Construccion, Universidad de Alicante)
Zornoza, E. (Dpto. de Ingenieria de la Construccion, Universidad de Alicante)
Andion, L.G. (Dpto. de Ingenieria de la Construccion, Universidad de Alicante)
Ivorra, S. (Dpto. de Ingenieria de la Construccion, Universidad de Alicante)
Garces, P. (Dpto. de Ingenieria de la Construccion, Universidad de Alicante)
Publication Information
Computers and Concrete / v.8, no.2, 2011 , pp. 229-241 More about this Journal
Abstract
In this work, cement paste samples with 1% (by cement mass) of a conductive carbon fiber admixture have been studied under uniaxial compression. Three different arrangements were used to measure the resistivity of the samples. According to the results obtained, the resistance should be measured using the four wire method in order to obtain good sensitivity and repeatability. The effect of the load value and the load rate on the fractional change of the volume resistivity has been determined. It has been observed that the gage factor (fractional change in resistance respect to strain) increases when the maximum load is increased, and the loading rate does not affect significantly this parameter. The effect of the sample ambient humidity on the material piezoresistivity has also been studied, showing that the response of the composite is highly affected by this parameter.
Keywords
carbon fiber; cement; piezoresistivity; sensor; strain; stress;
Citations & Related Records

Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 Shen, C., Lin, X. and Shi, Y. (2006), "Moving objects tracking under varying ilumination conditions", Int. J. Pattern Recogn., 27, 1632-1643.   DOI
2 Song, G., Sethi, V. and Li, H.N. (2006), "Vibration control of civil structures using piezoceramic smart materials: a review", Eng. Struct., 28(11), 1513-1524.   DOI
3 Spencer, Jr. B.F., Ruiz-Sandoval, M.E. and Kurata, N. (2004), "Smart sensory technology: opportunities and challenges", Struct. Control Health Monitor., 11(4), 349-368.   DOI
4 Wang, X.J. and Chung, D.D.L. (1998), "Short carbon fiber reinforced epoxy coating as a piezoresistive strain sensor for cement mortar", Sensor. Actuat. A - Phys., 71(3), 208-212.   DOI
5 Wen, S. and Chung, D.D.L. (2001), "Uniaxial compression in carbon fiber reinforced cement, sensed by electrical resistivity measurement in longitudinal and transverse directions", Cement Concrete Res., 31(2), 297- 301.   DOI
6 Wen, S. and Chung, D.D.L. (2005), "Strain sensing characteristics of carbon fiber-reinforced cement", ACI Mater. J., 102(4), 244-248.
7 Wen, S. and Chung, D.D.L. (2006), "The role of electronic and ionic conduction in the electrical conductivity of carbon fiber reinforced cement", Carbon, 44(11), 2130-2138.   DOI
8 Wen, S. and Chung, D.D.L. (2007), "Piezoresistivity-based strain sensing in carbon fiber reinforced cement", ACI Mater. J., 104(2), 171-179.
9 Wen, S.H. and Chung, D.D.L. (1999), "Piezoresistivity in continuous carbon fiber cement-matrix composites", Cement Concrete Res., 29(3), 445-449.   DOI
10 Wen, S.H. and Chung, D.D.L. (2003), "A comparative study of steel- and carbon-fibre cement as piezoresistive strain sensors", Adv. Cement Res., 15(3), 119-128.   DOI
11 Wen, S.H. and Chung, D.D.L. (2006), "Effects of strain and damage on strain-sensing ability of carbon fiber cement", J. Mater. Civil. Eng., 18(3), 355-360.   DOI
12 Wen, S.H. and Chung, D.D.L. (2006), "Model of piezoresistivity in carbon fiber cement", Cement Concrete Res., 36(10), 1879-1885.   DOI
13 Wu, B., Huang, X.J. and Lu, J.Z. (2005), "Biaxial compression in carbon-fiber-reinforced mortar, sensed by electrical resistance measurement", Cement Concrete Res., 35(7), 1430-1434.   DOI
14 Yao, W., Chen, B. and Wu, K. (2003), "Smart behavior of carbon fiber reinforced cement-based composite", J. Mater. Sci. Tech., 19(3), 239-243.   DOI
15 Ye, Y., Tsotsos, J.K., Harley, E. and Bennet, K. (2000), "Tracking a person with prerecorded image databse and a pan, tilt, and zoom camera", Mach. Vision Appl., 12, 32-43.   DOI
16 Chen, P.W. and Chung, D.D.L. (1996), "Concrete as a new strain/stress sensor", Compos. Part B, 27, 11-23.   DOI
17 Alcaide, J.S., Alcocel, E.G., Puertas, F., Lapuente, R. and Garces, P. (2007), "Carbon-fibre reinforced, alkaliactivated slag mortars", Materiales de Construccion, 57, 33-48.
18 Alcaide, J.S., Alcocel, E.G., Vilaplana, E. and Garces, P. (2007), "Mechanical characterization of Portland cement mortars containing petroleum or coal tar", Materiales de Construcción, 57, 53-62.
19 Cabeza, M., Merino, P., Novoa, X.R. and Sanchez, I. (2003), "Electrical effects generated by mechanical loading of hardened Portland cement paste", Cement Concrete Comp., 25(3), 351-356.   DOI
20 Cao, J. and Chung, D.D.L. (2004), "Electric polarization and depolarization in cement-based materials, studied by apparent electrical resistance measurement", Cement Concrete Res., 34(3), 481-485.   DOI
21 Chen, P.W. and Chung, D.D.L. (1993), "Carbon fiber reinforced concrete as a smart material capable of nondestructive flaw detection", Smart Mater. Struct., 2, 22-30.   DOI
22 Chung, D.D.L. (2001), "Functional properties of cement-matrix composites", J. Mater. Sci., 36(6), 1315-1324.   DOI
23 Chung, D.D.L. (2002), "Piezoresistive cement-based materials for strain sensing", J. Intell. Mate. Syst. Struct., 13(9), 599-609.   DOI
24 Chung, D.D.L. (2005), "Dispersion of short fibers in cement", J. Mater. Civil. Eng., 17(4), 379-383.   DOI
25 Garces, P., Andion, L.G., Varga, I., Catala, G. and Zornoza, E. (2007), "Corrosion of steel reinforcement in structural concrete with carbon material addition", Corros. Sci., 49, 2557-2566.   DOI
26 Garces, P., Fraile, J., Vilaplana-Ortego, E., Cazorla, D. and Andion, L.G. (2005), "Effect of carbon fibers on the mechanical properties and corrosion levels of reinforced Portland cement mortars", Cement Concrete Res., 35, 324-331.   DOI
27 Katsikeros, C.E. and Labeas, G.N. (2009), "Development and validation of a strain-based structural health monitoring system", Mech. Syst. Signal Pr., 23(2), 372-383.   DOI
28 Reza, F., Batson, G.B., Yamamuro, J.A. and Lee, J.S. (2003), "Resistance changes during compression of carbon fiber cement composites", J. Mater. Civil. Eng., 15(5), 476-483.   DOI