1 |
Kim, Y., Yoo, J. and Lee, M. (2012), "Optimal design of spaced plates under hypervelocity impact", J. Mech. Sci. Tecnol., 26(5), 1567-1575. https://doi.org/10.1007/s12206-012-0327-5.
DOI
|
2 |
Li, Y., Paik, K., Xing, T. and Carrica, P.M. (2012), "Dynamic overset CFD simulations of wind turbine aerodynamics", Renew. Energ., 37, 285-298. https://doi.org/10.1016/j.renene.2011.06.029.
DOI
|
3 |
Wang, M.Y., Wang, X. and Guo, D.A. (2003), "Level set method for structural topology optimization", Comput. Methods Appl. Mech. Eng., 192(1-2), 227-246. https://doi.org/10.1016/S0045-7825(02)00559-5.
DOI
|
4 |
Watt, J.P. (1980), "Clarification of the Hashin-Shtrikman bounds on the effective elastic moduli of polycrystals with hexagonal, trigonal, and tetragonal symmetries", J. Appl. Phys., 51, 1525. https://doi.org/10.1063/1.327804.
DOI
|
5 |
Yi, P., Huang, P. and Shi, T. (2016), "Numerical analysis and experimental investigation of modal properties for the gearbox in wind turbine", Front. Mech. Eng., 11, 388-402. https://doi.org/10.1007/s11465-016-0404-z.
DOI
|
6 |
Ghaisas, N.S., Ghate, A.S. and Lele, S.K. (2020), "Effect of tip spacing, thrust coefficient and turbine spacing in multi-rotor wind turbines and farms", Wind Energy Sci., 5, 51-72. https://doi.org/10.5194/wes-5-51-2020.
DOI
|
7 |
Zhang, S., Yin, J., Liu, Y., Sha, Z., Ma, F., Wang, Y. and Rolfe, B. (2018), "Multiobjective structure topology optimization of wind turbine brake pads considering thermal-structural coupling and brake vibration", Math. Probl. Eng., 2018, 7625273. https://doi.org/10.1155/2018/7625273.
DOI
|
8 |
Kutuk, M.A. and Gov. I. (2014), "Optimum bracing design under wind load by using topology optimization", Wind. Struct., 18(5), 497-510. https://doi.org/10.12989/was.2014.18.5.497.
DOI
|
9 |
Lee, Y.S., Gonzalez, J.A., Lee, J.H., Kim, Y.I., Park, K.C. and Han, S.H. (2016), "Structural topology optimization of the transition piece for an offshore wind turbine with jacket foundation", Renew. Energ., 85, 1214-1225. https://doi.org/10.1016/j.renene.2015.07.052.
DOI
|
10 |
Liu, X., Chen, Y. and Ye, Z. (2007), "Optimization model for rotor blades of horizontal axis wind turbines", Front. Mech. Eng., 2, 483-488. https://doi.org/10.1007/s11465-007-0084-9.
DOI
|
11 |
Mate, G.M. (2014), Development of a support structure for Multi-Rotor Wind Turbines, Master Thesis, University of Massachusetts, Amherst.
|
12 |
Moretti, M. and Silva, E.C.N. (2019), "Topology optimization of piezoelectric bi-material actuators with velocity feedback control", Front. Mech. Eng., 14, 190-200. https://doi.org/10.1007/s11465-019-0537-y.
DOI
|
13 |
Osher, S.J. and Santosa, F. (2001), "Level set method for optimization problems involving geometry and constraints: I. Frequencies of a two-density inhomogeneous drum", J. Comput. Phys., 171, 272-288. https://doi.org/10.1006/jcph.2001.6789.
DOI
|
14 |
Sandhu, N.S. and Chanana, S. (2018), "Performance and economic analysis of multi-rotor wind turbine", Emitter Int. J. Eng. Technol., 6(2), 289-316. https://doi.org/10.24003/emitter.v6i2.298.
DOI
|
15 |
Sigmund, O. (2007), "Morphology-based black and white filters for topology optimization", Struct. Multidiscipl. Optim., 33, 401-424.
DOI
|
16 |
Svanberg, K. (2002), "A class of globally convergent optimization methods based on conservative convex separable approximations", SIAM J., 12(2), 555-573. https://doi.org/10.1002/nme.1620240207.
DOI
|
17 |
Sigmund, O. and Peterson, J. (1998), "Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima", Struct. Multidiscipl. Optim., 16, 68-75. https://doi.org/10.1007/s00158-006-0087-x.
DOI
|
18 |
Smulders, P.T., Orbons, S. and Moes, C. (1984), "Aerodynamic interaction of two rotors set next to each other in one plane", EWEC Proc. Int. Conf. Hamburg. 529-533.
|
19 |
Svanberg, K. (1987), "The method of moving asymptotes-a new method for structural optimization", Int. J. Numer. Methods Eng., 24(2), 359-373.
DOI
|
20 |
Takezawa, A., Nishiwaki, S. and Kitamura, M. (2010), "Shape and topology optimization based on the phase field method and sensitivity analysis", J. Comput. Phys., 229, 2697-2718. https://doi.org/10.1016/j.jcp.2009.12.017.
DOI
|
21 |
Van der Laan, M.P., Andersen, S.J., Garcia, N.R., Angelou, N., Pirrung, G.R., Ott, S., Sjoholm, M., Sorensen, K.H., Vianna Neto, J.X., Kelly, M., Mikkelsen, T.K. and Larsen, G.C. (2019), "Power curve and wake analyses of the Vestas multi-rotor demonstrator", Wind Energy Sci., 4, 251-271. https://doi.org/10.5194/wes-4-251-2019.
DOI
|
22 |
Sethian, J.A. and Wiegmann, A. (2000), "Structural boundary design via level-set and immersed interface methods", J. Comput. Phys., 163, 489-528. https://doi.org/10.1006/jcph.2000.6581.
DOI
|
23 |
Braimah, M.N., Anozie, A.N. and Odejobi, O.J. (2016), "Utilization of Response Surface Methodology (RSM) in the Optimization of Crude Oil Refinery Process, New Port-Harcourt Refinery, Nigeria", J. Eng. Sci. Technol. 3, 4361-4369.
|
24 |
Bastankhah, M. and Abkar, M. (2019), "Multirotor wind turbine wakes", Phys. Fluids, 31, 085106. https://doi.org/10.1063/1.5097285.
DOI
|
25 |
Bendsoe, M.P. and Sigmund, O. (2003), Topology Optimization: Theory, Methods and Applications, Springer-Verlag, Berlin, Germany.
|
26 |
Yi, P., Dong, L. and Shi, T. (2014), "Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox", Front. Mech. Eng., 9, 354-367. https://doi.org/10.1007/s11465-014-0319-5.
DOI
|
27 |
Jonkman, J., Butterfield, S., Musial, W. and Scott, G. (2009), "Definition of a 5MW reference wind turbine for offshore system development", NREL. TP-500-38060, Golden Co.
|
28 |
Bendsoe, M.P. (1989), "Optimal shape design as a material distribution problem", Struct. Optim., 1, 193-202. https://doi.org//10.1007/BF01650949.
DOI
|
29 |
Bendsoe, M.P. and Kikuchi, N. (1988), "Generating optimal topologies in structural design using a homogenization method", Comput. Methods Appl. Mech. Eng., 71(2), 197-224. https://doi.org/10.1016/0045-7825(88)90086-2.
DOI
|
30 |
Bendsoe, M.P., Haber, R.B. and Jog, C.S. (1996), "A new approach to variable-topology shape design using a constraint on perimeter", Struct. Optim., 11, 1-12. https://doi.org/doi.org/10.1007/BF01279647.
DOI
|
31 |
Ghaisas, N.S., Ghate, A.S. and Lele, S.K. (2018), "Large-eddy simulation study of multi-rotor wind turbines", J. Phys. Conf. Ser., 1037, 072021. https://doi.org/10.1088/1742-6596/1037/7/072021.
DOI
|
32 |
Dabrowski, D., Natarajan, A. and Stehouwer, E. (2015), "Structural optimization of an innovative 10 MW wind turbine nacelle", EWEA Annual Event and Exhibition.
|
33 |
Chasapogiannis, P., Prospathopoulous, J.M., Voutsinas, S.G. and Chaviaropoulous, T.K. (2014), "Analysis of the aerodynamic performance of the multi-rotor concept", J. Phys. Conf. Ser., 524: 012084. https://doi.org/10.1088/1742-6596/524/1/012084.
DOI
|
34 |
Choi, J.S., Yamada, T., Izui, K., Nishiwaki, S. and Yoo, J. (2011), "Topology optimization using a reaction-diffusion equation", Comput. Methods Appl. Mech. Eng., 200(29-32), 2407-2420. https://doi.org/10.1016/j.cma.2011.04.013.
DOI
|
35 |
David, S., Dominik, J.S. and Martin, K. (2013), "Nonlinear model predictive control of wind turbines using LIDAR", Wind Energ., 16: 1107-1129. https://doi.org/10.1002/we.1533.
DOI
|
36 |
Gebraad, P.M.O., Teeuwisse, F.W., van Wingerden, J.W., Fleming, P.A., Ruben, S.D., Marden, J.R. and Pao, L.Y. (2016), "Wind plant power optimization through yaw control using a parametric model for wake effect-a CFD simulation study", Wind Energ., 19, 95-114. https://doi.org/10.1002/we.1822.
DOI
|
37 |
Jamieson, P. and Branney, M. (2012), "Multi-Rotors; A Solution to 20 MW and Beyond?", Energy Procedia, 24, 52-59.
DOI
|
38 |
Jamieson, P. and Branney, M. (2019), "Structural Considerations of a 20MW Multi-Rotor wind Energy System", J. Phys. Conf. Ser., 555, https://doi.org/012013.10.1016/j.egypro.2012.06.086.
|
39 |
Jang, S., Goh, C.H. and Choi, H.J. (2015), "Multiphase design exploration method for lightweight structural design: example of vehicle mounted antenna-supporting structure", Int. J. Precis. Eng. Manuf., 2(3), 281-287. https://doi.org/10.1007/s40684-015-0034-7.
DOI
|