Browse > Article
http://dx.doi.org/10.12989/was.2015.20.4.579

A combination method to generate fluctuating boundary conditions for large eddy simulation  

Wang, Dayang (School of Civil Engineering, Guangzhou University)
Yu, X.J. (Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology, Clear Water Bay)
Zhou, Y. (School of Civil Engineering, Guangzhou University)
Tse, K.T. (Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology, Clear Water Bay)
Publication Information
Wind and Structures / v.20, no.4, 2015 , pp. 579-607 More about this Journal
Abstract
A Combination Random Flow Generation (CRFG) technique for obtaining the fluctuating inflow boundary conditions for Large Eddy Simulation (LES) is proposed. The CRFG technique was developed by combining the typical RFG technique with a novel calculation of k and ${\varepsilon}$ to estimate the length- and time-scales (l, ${\tau}$) of the target fluctuating turbulence field used as the inflow boundary conditions. Through comparatively analyzing the CRFG technique and other existing numerical/experimental results, the CRFG technique was verified for the generation of turbulent wind velocity fields with prescribed turbulent statistics. Using the turbulent velocity fluctuations generated by the CRFG technique, a series of LESs were conducted to investigate the wind flow around S-, R-, L- and U-shaped building models. As the pressures of the models were also measured in wind tunnel tests, the validity of the LES, and the effectiveness of the inflow boundary generated by the CRFG techniques were evaluated through comparing the simulation results to the wind tunnel measurements. The comparison showed that the LES accurately and reliably simulates the wind-induced pressure distributions on the building surfaces, which indirectly validates the CRFG technique in generating realistic fluctuating wind velocities for use in the LES. In addition to the pressure distribution, the LES results were investigated in terms of wind velocity profiles around the building models to reveal the wind flow dynamics around bluff bodies. The LES results quantitatively showed the decay of the bluff body influence when the flow moves away from the building model.
Keywords
computational wind engineering; large eddy simulation; inflow boundary condition; random turbulence generation technique; wind pressure characteristic; wind velocity profile;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 ADINA R&D, Inc. (2005), Theory and Modeling Guide, Volume I, II and III,Watertown, USA, http://www.adina.com.
2 Baric, E., Dzijan, I. and Kozmar, H. (2010), "Numerical simulation of wind characteristics in the wake of a rectangular building submitted to realistic boundary layer conditions", Transactions of Famena, 34(3), 1-10.
3 Batten, P., Goldberg, U. and Chakravarthy, S. (2004), "Interfacing statistical turbulence closures with large-eddy simulation", AIAA J., 42(3), 485-492.   DOI   ScienceOn
4 Bazdidi-Tehrani, F., Ghafouri, A. and Jadidi, M. (2013), "Grid resolution assessment in large eddy simulation of dispersion around an isolated cubic building", J. Wind Eng. Ind. Aerod., 121, 1-15.   DOI
5 Blocken, B., Carmeliet, J. and Stathopoulos, T. (2007), "CFD evaluation of wind speed conditions in passages between parallel buildings-effect of wall-function roughness modifications for the atmospheric boundary layer flow", J. Wind Eng. Ind. Aerod., 95(9-11), 941-962.   DOI   ScienceOn
6 Blocken, B., Stathopoulos, T. and Carmeliet, J. (2007), "CFD simulation of the atmospheric boundary layer: wall function problems", Atmos Environ., 41(2), 238-252.   DOI
7 Camarri, S., Salvetti, M.V., Koobus, B. and Dervieux, A. (2002), "Large-eddy simulation of a bluff-body flow on unstructured grids", Int. J. Numer Meth. Fl., 40(11), 1431-1460.   DOI   ScienceOn
8 Celik, I., Cehreli, Z.N. and Yavuz, I. (2005), "Index of resolution quality for large eddy simulation", J. Fluids Eng., 127(5), 949-958.   DOI
9 China Ministry of Construction (2012), Loading code for the design of building structures, GB 50009-2012, China Building Industry Press, Beijing.
10 Churchfield, M.J., Lee, S., Michalakes, J. and Moriarty, PJ. (2012), "A numerical study of the effects of atmospheric and wake turbulence on wind turbine dynamics", J. Turbul, 13, N14.   DOI
11 Dagnew, A.K. and Bitsuamlak, G.T. (2014), "Computational evaluation of wind loads on a standard tall building using LES", Wind Struct., 18(5), 567-598.   DOI
12 Franke, J., Hellsten, A., Schlunzen, H. and Carissimo, B. (2007), Best practice guideline for the CFD simulation of flows in the urban environment, COST Action 732.
13 Gorle, C., Beeck, J. and Van, R.P. (2010), "Dispersion in the wake of a rectangular building: validation of two reynolds-averaged navier-stokes modelling approaches", Bound. -Lay. Meteorol, 137(1), 115-133.   DOI
14 Gomes, M.G., Moret, R.A. and Pedro M. (2005), "Experimental and numerical study of wind pressures on irregular-plan shapes", J. Wind Eng. Ind. Aerod., 93, 741-756.   DOI   ScienceOn
15 Gousseau, P., Blocken, B. and Van H.G.J.F. (2013), "Quality assessment of Large-Eddy Simulation of wind flow around a high-rise building: Validation and solution verification", Comput. Fluids, 79, 120-133.   DOI
16 Hinze, J.O. (1975), Turbulence, McGraw-Hill, New York.
17 Hoshiya, M. (1972), "Simulation of multi-correlated random processes and application to structural vibration problems", Proceedings of JSCE, 204, 121-128.
18 Huang, S.H., Li, Q.S. and Wu, J.R. (2010), "A general inflow turbulence generator for large eddy simulation", J. Wind Eng. Ind. Aerod., 98, 600-617.   DOI
19 Huang, S.H., Li, Q.S. and Xu, S.L. (2006), "Numerical evaluation of wind effects on a tall steel building by CFD", J. Constr. Steel Res., 63(5), 1-16.
20 Jones, W.P. and Launder, B.E. (1972), "The prediction of laminarization with a 2-equation model of turbulence", In. J. Heat Mass Tran., 15, 301-318.   DOI
21 Keating, A., Piomelli, U., Balaras, E. and Kaltenbach, H.J. (2004), "A priori and a posteriori tests of inflow conditions for large-eddy simulation", Phys. Fluids, 16, 4696.   DOI
22 Kim, K.C., Ji, H.S. and Seong, S.H. (2003), "Flow structure around a 3-D rectangular prism in a turbulent boundary layer", J. Wind Eng. Ind. Aerod., 91, 653-669.   DOI
23 Klein, M., Sadiki, A. and Janicka, J. (2003), "A digital filter based generation of inflow data for spatially developing direct numerical or large eddy simulations", J. Comput. Phys., 186, 652-665.   DOI
24 Kondo, K., Murakami, S. and Mochida, A. (1997), "Generation of velocity fluctuations for inflow boundary condition of LES", J. Wind Eng. Ind. Aerod., 67-68, 51-64.   DOI
25 Kozmar, H. (2011), "Wind-tunnel simulations of the suburban ABL and comparison with international standards", Wind Struct., 14(1), 15-34.   DOI
26 Li, Q.S., Xiao, Y.Q. and Wong, C.K. (2005), "Full-scale monitoring of typhoon effects on super tall buildings", J. Fluids Struct., 20(5), 697-717.   DOI
27 Kraichnan, R.H. (1970), "Diffusion by a random velocity field", Phys. Fluids, 13(1), 22-31.   DOI
28 Labovsky, J. and Jelemensky, L. (2011), "Verification of CFD pollution dispersion modelling based on experimental data", J. Loss Prevent. Proc., 24 (2), 166-177.   DOI
29 Li, Q.S., Xiao, Y.Q., Wong, C.K. and Jeary, A.P. (2004), "Field measurements of typhoon effects on a super tall building", Eng. Struct., 26(2), 233-244.   DOI
30 Li, Q.S., Xiao, Y.Q., Fu, J.Y. and Li, Z.N. (2007), "Full scale measurements of wind effects on the Jin Mao Building", J. Wind Eng. Ind. Aerod., 95(6), 445-466.   DOI
31 Lumley, J.L. and Panofsky, H.A. (1964), The Structure of Atmospheric Turbulence, Wiley- Interscience, New York, 239.
32 Mathey, F., Cokljat, D., Bertoglio, J.P. and Sergent, E. (2006), "Assessment of the vortex method for large eddy simulation inlet conditions", Prog. Comput. Fluid Dy., 6(1-3), 58-67.   DOI
33 Murakami, S. (1998), "Overview of turbulence models applied in CWE-1997", J. Wind Eng. Ind. Aerod., 76, 1-24.
34 Meng, Y. and Hibi, K. (1998), "Turbulent measurements of the flow field around a high-rise building", J. Wind Eng., 76, 55-64.
35 Murakami, S. (1993), "Comparison of various turbulence models applied to a bluff body", J. Wind Eng. Ind. Aerod., 46- 47, 21-36.   DOI
36 O'Sullivan, J.P., Archer, R.A. and Flay, R.G.J. (2011), "Consistent boundary conditions for flows within the atmospheric boundary layer",J. Wind Eng. Ind. Aerod., 99, 65-77.   DOI
37 Sepe, V. and Vasta, M. (2014), "Wind-tunnel tests on high-rise buildings: wind modes and structural response", Wind Struct.., 18(1), 37-56.   DOI
38 Parente, A., Gorle, C. and Beeck, J. (2011), "A comprehensive modelling approach for the neutral atmospheric boundary layer: consistent inflow conditions, wall function and turbulence model", Bound. - Lay. Meteorol., 140, 411-428.   DOI
39 Richard, J.S., Jason, G. and Charles, M. (2014), "A concurrent precursor inflow method for large eddy simulation and applications to finite length wind farms", Renew. Energ., 68, 46-50.   DOI
40 Schluter, J.U., Pitsch, H. and Moin, P. (2004), "Large eddy simulation inflow conditions for coupling with Reynolds-averaged flow solvers", AIAA J., 42(3), 478-484.   DOI
41 Sergent, E. (2002), Vers une methode de couplage entre la simulation des grandes echelles et les modeles statistiques, PhD thesis, Ecole doctorale MEGA, Ecole Centrale de Lyon.
42 Simiu, E. and Scanlan, R.H. (1996), Wind effects on structures, 3rd Ed., Wiley, New York.
43 Smirnov, A., Shi, S. and Celik, I. (2001), "Random flow generation technique for large-eddy simulations and particle-dynamics modeling", ASME J. Fluids Eng.,123, 359-371.   DOI
44 Tamura, T. (2000), "Towards practical use of LES in wind engineering", J. Wind Eng. Ind. Aerod., 96(10-11), 1451-1471.   DOI
45 Tse, K.T., Wang, D.Y. and Zhou, Y. (2013), "Wind pressure characteristics for a double tower high-rise structure in a group of buildings", Wind Struct.., 16(5), 491-515.   DOI
46 Tse, K.T., Yang, Y., Shum, K.M and Xie, Z.N. (2013), "Numerical simulation of wind loads on noise mitigation structures along roadsides", Wind Struct., 17(3), 299-315.   DOI
47 Wienken, W., Stiller, J. and Keller, A. (2006), "A method to predict cavitation inception using large-eddy simulation and its application to the flow past a square cylinder", J. Fluids Eng., 128(2), 316-326.   DOI
48 Tunay, T., Sahin, B. and Akilli, H. (2013), "Experimental and numerical studies of the flow around the Ahmed body", Wind Struct., 17(5), 515-535.   DOI
49 Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T. and Yoshikawa, M. (2008), "AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings", J. Wind Eng. Ind. Aerod., 96, 1749-1761.   DOI
50 Wang, D.Y. and Zhou, Y. (2010), "Numerical study on spatial wind-pressure distribution characteristic of three-dimensional U-shaped body", J. Wuhan Univ. Technol., 9, 157-160. (In Chinese)
51 Yang, W., Quan, Y., Jin, X.Y., Tamura, Y. and Gu, M. (2008), "Influences of equilibrium atmosphere boundary layer and turbulence parameter on wind loads of low-rise building", J. Wind Eng. Ind. Aerod., 96, 2080-2092.   DOI
52 Yang, Y., Gu, M., Chen, S.Q. and Jin, X.Y. (2009), "New inflow boundary conditions for modeling the neutral equilibrium atmospheric boundary layers in Computational Wind Engineering", J. Wind Eng. Ind. Aerod., 97(2), 88-95.   DOI
53 Yang, Y., Jin, X.Y., Tse, K.T. and Gu, M. (2012), "Verification of a tree canopy model and its application in wind environment optimization design of high-rise buildings", Wind Struct., 15(5), 409-421.   DOI