Browse > Article
http://dx.doi.org/10.12989/was.2013.16.3.241

Structural analysis of horizontal axis wind turbine blade  

Tenguria, Nitin (Department of Applied Mechanics, Maulana Azad National Institute of Technology)
Mittal, N.D. (Department of Applied Mechanics, Maulana Azad National Institute of Technology)
Ahmed, Siraj (Department of Mechanical Engineering, Maulana Azad National Institute of Technology)
Publication Information
Wind and Structures / v.16, no.3, 2013 , pp. 241-248 More about this Journal
Abstract
The wind turbine blade is a very important part of the rotor. Extraction of energy from wind depends on the design of blade. In this work, the analysis is done on a blade of length 38.95 m which is designed for V82-1.65 MW horizontal axis wind turbine (supplied by Vestas). The airfoil taken for the blade is NACA 634-221 which is same from root to tip. The analysis of designed blade is done in flap-wise loading. Two shapes of the spar are taken, one of them is of square shape and the other one is combination of square and cross shape. The blade and spar are of the same composite material. The Finite element analysis of designed blade is done in ANSYS. This work is focused on the two segments of blade, root segment and transition segment. Result obtained from ANSYS is compared with the experimental work.
Keywords
design; material; chord; twist; blade;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Brondsted, P., Lilholt, H. and Lystrup, Aa. (2005), Composite materials for wind power turbine blades, Materials Research Department, Riso National Laboratory.
2 Centraltrykkeri, J. (2002), Guidelines for design of wind turbines, Second ed., Det Norske Veritas and Riso National Laboratory, Denmark.
3 Grujicic, M., Arakere, G., Subramanian, E., Sellappan, V., Vallejo, A. and Ozen, M. (2009), "Structuralresponse analysis, fatigue-life prediction, and material selection for 1 MW horizontal-axis wind-turbine blades", J. Mater. Eng. Perform., 19, 790-801.
4 Grujicic, M., Arakere, G., Pandurangan, B.E., Sellappan, V., Vallejo, A. and Ozen, M. (2009), "Multidisciplinary design optimization for glass-fiber epoxy-matrix composite 5 MW horizontal-axis wind-turbine blades", J. Mater. Eng. Perform., 19, 1116-1127.
5 Hau, E. (2006), Wind turbines fundamental, technologies, application, economics, Krailling, Springer.
6 Jensen, F.M., Falzon, B.G., Ankersen, J. and Stang, H. (2006), "Structural testing and numerical simulation of a 34 m composite wind turbine blade", Compos. Struct., 76, 52-61.   DOI   ScienceOn
7 Lin, H.J., Lai, W.M. and Kuo, Y.M. (2010), "Combined analytical and finite element beam model for wind turbine blades", J. Reinf. Plast. Comp., 29, 2422-2437.   DOI   ScienceOn
8 Jureczko, M., Pawlak, M. and Mezyk, A. (2005), "Optimization of wind turbine blades", Mater. Process. Technol., 167, 463-471.   DOI   ScienceOn
9 Kong, C., Bang, J. and Sugiyama, Y. (2004), "Structural investigation of composite wind turbine blade considering various load cases and fatigue life", Energy, 30, 2101-2114.
10 Overgaard, L.C.T. and Lund, E. (2005), "Structural design sensitivity analysis and optimization of vestas V52 wind turbine blade", Proceedings of the 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil.
11 Mandell, J.F., Samborsky, D.D., Combs, D.W., Scott, M.E. and Cairns, D.S. (1998), Fatigue of composite material beam elements representative of wind turbine blade substructure, Supercedes Report DE00014386, PBD.
12 One-Dimensional Variations: Blades, Dutch Offshore Wind Energy Converter Project, LM Glasfiber Holland BV, 2003.
13 Ronold, K.O. and Larsen, G.C. (2000), "Reliability - based design of wind turbine rotor blades against failure in ultimate loading", Eng. Struct., 22, 565-574.   DOI   ScienceOn
14 Ryu, J.Y. and Kim, D.H. (2004), "Blade design of a 360 KW direct drive wind turbine generator system", Proceeding of the ACCM4, Sydney.