Browse > Article
http://dx.doi.org/10.12989/sem.2022.84.3.393

Effect of perlite powder on properties of structural lightweight concrete with perlite aggregate  

Yan, Gongxing (School of Intelligent Construction, Luzhou Vocational and Technical College)
Al-Mulali, Mohammed Zuhear (Building & Construction Engineering Techniques Department, Al-Mustaqbal University College)
Madadi, Amirhossein (Department of Civil and Environmental Engineering, Francis College of Engineering, University of Massachusetts Lowell)
Albaijan, Ibrahim (Mechanical Engineering Department, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University)
Ali, H. Elhosiny (Department of Physics, Faculty of Science, King Khalid University)
Algarni, H. (Department of Physics, Faculty of Science, King Khalid University)
Le, Binh Nguyen (Institute of Research and Development, Duy Tan University)
Assilzadeh, Hamid (Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences)
Publication Information
Structural Engineering and Mechanics / v.84, no.3, 2022 , pp. 393-411 More about this Journal
Abstract
A high-performance reactive powder concrete (RPC) has been readied alongside river sand, with 1.25 mm particle size when under the condition of 80C steam curing. As a heat and sound insulation, expanded perlite aggregate (EPA) provides economic advantages in building. Concrete containing EPA is examined in terms of cement types (CEM II 32.5R and CEM I 42.5R), doses (0, 2%, 4% and 6%) as well as replacement rates in this research study. The compressive and density of concrete were used in the testing. At the end of the 28-day period, destructive and nondestructive tests were performed on cube specimens of 150 mm150 mm150 mm. The concrete density is not decreased with the addition of more perlite (from 45 to 60 percent), since the enlarged perlite has a very low barrier to crushing. To get a homogenous and fluid concrete mix, longer mixing times for all the mix components are necessary due to the higher amount of perlite. As a result, it is not suggested to use greater volumes of this aggregate in RPC. In the presence of de-icing salt, the lightweight RPC exhibits excellent freeze-thaw resistance (mass is less than 0.2 kg/m2). The addition of perlite strengthens the aggregate-matrix contact, but there is no apparent ITZ. An increased compressive strength was seen in concretes containing expanded perlite powder and steel fibers with good performance.
Keywords
compressive strength; expanded glass aggregate; lightweight concrete; perlite powder;
Citations & Related Records
Times Cited By KSCI : 68  (Citation Analysis)
연도 인용수 순위
1 Aggarwal, J., Sharma, S., Kamyab, H. and Kumar, A. (2020), "The realm of biopolymers and their usage: An overview", J. Environ. Treat. Tech., 8(2), 1005-1016.
2 Safa, M., Ahmadi, M., Mehrmashadi, J., Petkovic, D., Mohammadhassani, M., Zandi, Y. and Sedghi, Y. (2020a), "Selection of the most influential parameters on vectorial crystal growth of highly oriented vertically aligned carbon nanotubes by adaptive neuro-fuzzy technique", Int. J. Hydromechatron., 3(3), 238-251.   DOI
3 Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Bin Baharom, S., Nor, N.M. and Petkovic, D. (2016a), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.   DOI
4 Seyed Mehdi, D. and Seo, H.J. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.   DOI
5 Shah, S.N.R., Sulong, N.H.R., Jumaat, M.Z. and Shariati, M. (2016c), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.   DOI
6 Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020c), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Struct., 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031.   DOI
7 Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019b), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.   DOI
8 Cheng, H., Liu, L. and Sun, L. (2022), "Bridging the gap between laboratory and field moduli of asphalt layer for pavement design and assessment: A comprehensive loading frequency-based approach", Front. Struct. Civil Eng., 1-14. https://doi.org/10.1007/s11709-022-0811-7.   DOI
9 Velu, M., Balasubramanian, B., Velmurugan, P., Kamyab, H., Ravi, A.V., Chelliapan, S., Lee, C.T. and Palaniyappan, J. (2021), "Fabrication of nanocomposites mediated from aluminium nanoparticles/Moringa oleifera gum activated carbon for effective photocatalytic removal of nitrate and phosphate in aqueous solution", J. Clean. Prod., 281, 124553. https://doi.org/10.1016/j.jclepro.2020.124553.   DOI
10 Yadav, V.K., Yadav, K.K., Gnanamoorthy, G., Choudhary, N., Khan, S.H., Gupta, N., Kamyab, H. and Bach, Q.V. (2020), "A novel synthesis and characterization of polyhedral shaped amorphous iron oxide nanoparticles from incense sticks ash waste", Environ. Technol. Innov., 20, 101089. https://doi.org/10.1016/j.eti.2020.101089.   DOI
11 Wang, X., Wu, S., Yin, J., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022a), "On the electromechanical energy absorption of the reinforced composites piezoelectric MEMS via Adaptive neuro-fuzzy inference system and MCS theory", Compos. Struct.,, 116246. https://doi.org/10.1016/j.compstruct.2022.116246.   DOI
12 Hashim, H., Ramlan, M.R., Shiun, L.J., Siong, H.C., Kamyab, H., Majid, M.Z.A. and Lee, C.T. (2015), "an integrated carbon accounting and mitigation framework for greening the industry", Energy Procedia, 75, 2993-2998. https://doi.org/10.1016/j.egypro.2015.07.609.   DOI
13 Hosseini, M., Fazelian, N., Fakhri, A., Kamyab, H., Yadav, K. K. and Chelliapan, S. (2019), "Preparation, and structural of new NiS-SiO2 and Cr2S3-TiO2 nano-catalyst: Photocatalytic and antimicrobial studies", J. Photochem. Photobiol. B: Biol., 194, 128-134. https://doi.org/10.1016/j.jphotobiol.2019.03.016.   DOI
14 Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.   DOI
15 Toghroli, A. (2015), "Applications of the ANFIS and LR models in the prediction of shear connection in composite beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
16 Roudi, A., Chelliapan, S., Kamyab, H., Md Din, M.F. and Krishnan, S. (2019), "Removal of COD from landfill leachate by predication and evaluation of Multiple Linear Regression (MLR) model and fenton process", Egypt. J. Chem., 62(7), 1207-1218.
17 Cobanli, M. (1993), "Producing high-heat transfer coefficient light construction materials", M. Sc. Thesis, Osmangazi University.
18 Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi Arbat, P. (2011a), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/IJPS11.1585.   DOI
19 Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.   DOI
20 Cheng, H., Sun, L., Wang, Y. and Chen, X. (2021), "Effects of actual loading waveforms on the fatigue behaviours of asphalt mixtures", Int. J. Fatigue, 151, 106386. https://doi.org/10.1016/j.ijfatigue.2021.106386.   DOI
21 Jahandari, S., Tao, Z., Saberian, M., Shariati, M., Li, J., Abolhasani, M., Kazemi, M., Rahmani, A. and Rashidi, M. (2022), "Geotechnical properties of lime-geogrid improved clayey subgrade under various moisture conditions", Road Mater. Pavem. Des., 23(9), 2057-2075. https://doi.org/10.1080/14680629.2021.1950816.   DOI
22 Jasni, A.B., Kamyab, H., Chelliapan, S., Arumugam, N., Krishnan, S. and Din, M.F.M. (2020), "Treatment of wastewater using response surface methodology: A brief review", Chem. Eng. Trans., 78, 535-540. https://doi.org/10.3303/CET2078090.   DOI
23 Naderipour, A., Abdul-Malek, Z., Davoodkhani, I.F., Kamyab, H. and Ali, R.R. (2021b), "Load-frequency control in an islanded microgrid PV/WT/FC/ESS using an optimal self-tuning fractional-order fuzzy controller", Environ. Sci. Pollut. Res., 1-12. https://doi.org/10.1007/s11356-021-14799-1.   DOI
24 Juncheng, G., Mohammadreza, K., Danial Jahed, A., Aria, G., Shahrizan, B., Armin, M., Ali, S., Majid, K. and Jian, Z. (2020), "Evaluating the bond strength of FRP in concrete samples using machine learning methods", Smart Struct. Syst., 26(4), 403-418. http://doi.org/10.12989/sss.2020.26.4.403.   DOI
25 Balaraman, P., Balasubramanian, B., Kaliannan, D., Durai, M., Kamyab, H., Park, S., Chelliapan, S., Lee, C.T., Maluventhen, V. and Maruthupandian, A. (2020), "Phyco-synthesis of silver nanoparticles mediated from marine algae Sargassum myriocystum and its potential biological and environmental applications", Wast. Biomass Valoriz., 11(10), 5255-5271. https://doi.org/10.1007/s12649-020-01083-5.   DOI
26 Asadi, S., Nilashi, M., Samad, S., Rupani, P.F., Kamyab, H. and Abdullah, R. (2021), "A proposed adoption model for green IT in manufacturing industries", J. Clean. Prod., 297, 126629. https://doi.org/10.1016/j.jclepro.2021.126629.   DOI
27 Ashokkumar, V., Chen, W.H., Kamyab, H., Kumar, G., Al-Muhtaseb, A.A.H. and Ngamcharussrivichai, C. (2019), "Cultivation of microalgae Chlorella sp. in municipal sewage for biofuel production and utilization of biochar derived from residue for the conversion of hematite iron ore (Fe2O3) to iron (Fe)-Integrated algal biorefinery", Energy, 189, 116128. https://doi.org/10.1016/j.energy.2019.116128.   DOI
28 Ashraf, M.A., Peng, W.X., Fakhri, A., Hosseini, M., Kamyab, H. and Chelliapan, S. (2019), "Manganese disulfide-silicon dioxide nano-material: Synthesis, characterization, photocatalytic, antioxidant and antimicrobial studies", J. Photochem. Photobiol. B: Biol., 198, 111579. https://doi.org/10.1016/j.jphotobiol.2019.111579.   DOI
29 Cao, Y., Azar, S.M., Shah, S., Salih, A.F.M., Thiagi, T., Jermsittiparsert, K. and Ho, L.S. (2020a), "Performance assessment of buckling restrained brace with tubular profile", Adv. Nano Res., 8(4), 323-333. https://doi.org/10.12989/anr.2020.8.4.323.   DOI
30 Kalaimurugan, D., Balamuralikrishnan, B., Govindarajan, R.K., Al-Dhabi, N.A., Valan Arasu, M., Vadivalagan, C., Venkatesan, S., Kamyab, H., Chelliapan, S. and Khanongnuch, C. (2022), "Production and characterization of a novel biosurfactant molecule from bacillus safensis YKS2 and assessment of its efficiencies in wastewater treatment by a directed metagenomic approach", Sustain., 14(4), 2142. https://doi.org/10.3390/su14042142.   DOI
31 Kamyab, H., Chelliapan, S., Din, M.F.M., Shahbazian-Yassar, R., Rezania, S., Khademi, T., Kumar, A. and Azimi, M. (2017a), "Evaluation of Lemna minor and Chlamydomonas to treat palm oil mill effluent and fertilizer production", J. Water Proc. Eng., 17, 229-236. https://doi.org/10.1016/j.jwpe.2017.04.007.   DOI
32 Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020x), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237 .   DOI
33 Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017a), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
34 Jedidi, M., Benjeddou, O. and Soussi, C. (2015), "Effect of expanded perlite aggregate dosage on properties of lightweight concrete", Jordan J. Civil Eng., 9(3).
35 Naderipour, A., Abdul-Malek, Z., Nowdeh, S.A., Kamyab, H., Ramtin, A.R., Shahrokhi, S. and Klemes, J.J. (2021d), "Comparative evaluation of hybrid photovoltaic, wind, tidal and fuel cell clean system design for different regions with remote application considering cost", J. Clean. Prod., 283, 124207. https://doi.org/10.1016/j.jclepro.2020.124207.   DOI
36 Kamyab, H., Md Din, M.F., Lee, C.T., Keyvanfar, A., Shafaghat, A., Majid, M.Z.A., Ponraj, M. and Yun, T.X. (2015c), "Lipid production by microalgae Chlorella pyrenoidosa cultivated in palm oil mill effluent (POME) using hybrid photo bioreactor (HPBR)", Desalin. Water Treat., 55(13), 3737-3749. https://doi.org/10.1080/19443994.2014.957943.   DOI
37 Hosur Shivaramaiah, N.K., Kattimani, S., Shariati, M. and Nguyen-Thoi, T. (2022), "Geometrically nonlinear behavior of two-directional functionally graded porous plates with four different materials", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 09544062221111038. https://doi.org/10.1177/09544062221111038.   DOI
38 Iqbal, S., Ali, A., Holschemacher, K. and Bier, T.A. (2015), "Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)", Constr. Build. Mater., 98, 325-333. https://doi.org/10.1016/j.conbuildmat.2015.08.112.   DOI
39 Kamyab, H., Lim, J.S., Khademi, T., Hod, W.S., Ahmad, R., Hashim, H., Siong, H.C., Keyvanfar, A. and Lee, C.T. (2015b), "Greenhouse gas emission of organic waste composting: A case study of Universiti Teknologi Malaysia green campus flagship project", J. Teknologi, 74(4), https://doi.org/10.11113/jt.v74.4618.   DOI
40 Kamyab, H., Md Din, M.F., Ponraj, M., Keyvanfar, A., Rezania, S., Taib, S.M. and Abd Majid, M.Z. (2016c), "Isolation and screening of microalgae from agro-industrial wastewater (POME) for biomass and biodiesel sources", Desalin. Water Treat., 57(60), 29118-29125. https://doi.org/10.1080/19443994.2016.1139101.   DOI
41 Kamyab, H., Naderipour, A., Jahannoush, M., Abdullah, A. and Marzbali, M.H. (2022), "Potential effect of SARS-CoV-2 on solar energy generation: Environmental dynamics and implications", Sustain. Energy Technol. Assess., 52, 102027. https://doi.org/10.1016/j.seta.2022.102027.   DOI
42 Elham, K. and Hesam, K. (2016), "Investigating the relationship between soil properties and infestation population of causal agent of soybean charcoal rot (Macrophomina phaseolina)", Acad. J. Agricult. Res., 4(6), 363-373.
43 Shah, S.N.R., Sulong, N.H.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016e), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. http://doi.org/10.1016/j.tws.2016.05.021.   DOI
44 Balaraman, P., Balasubramanian, B., Liu, W.C., Kaliannan, D., Durai, M., Kamyab, H., Alwetaishi, M., Maluventhen, V., Ashokkumar, V., Chelliapan, S. and Maruthupandian, A. (2022), "Sargassum myriocystum-mediated TiO2-nanoparticles and their antimicrobial, larvicidal activities and enhanced photocatalytic degradation of various dyes", Environ. Res., 204, 112278. https://doi.org/10.1016/j.envres.2021.112278.   DOI
45 Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel Compos. Struct., 40(6), 853-868. https://doi.org/10.12989/scs.2021.40.6.853.   DOI
46 Divyah, N., Thenmozhi, R., Neelamegam, M. and Prakash, R. (2021), "Characterization and behavior of basalt fiber-reinforced lightweight concrete", Struct. Concrete, 22(1), 422-430. https://doi.org/10.1002/suco.201900390.   DOI
47 Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TE-GDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017.   DOI
48 Elshafie, S. and Whittleston, G. (2015), "A review of the effect of basalt fibre lengths and proportions on the mechanical properties of concrete", Int. J. Res. Eng. Technol., 4(1), 458-465.
49 Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Math. Prob. Eng., 2015, Article ID 671527. https://doi.org/10.1155/2015/671527.   DOI
50 Naderipour, A., Nowdeh, S.A., Saftjani, P.B., Abdul-Malek, Z., Bin Mustafa, M.W., Kamyab, H. and Davoudkhani, I.F. (2021e), "Deterministic and probabilistic multi-objective placement and sizing of wind renewable energy sources using improved spotted hyena optimizer", J. Clean. Prod., 286, 124941. https://doi.org/10.1016/j.jclepro.2020.124941.   DOI
51 Naderipour, A., Ramtin, A.R., Abdullah, A., Marzbali, M.H., Nowdeh, S.A. and Kamyab, H. (2022), "Hybrid energy system optimization with battery storage for remote area application considering loss of energy probability and economic analysis", Energy, 239, 122303. https://doi.org/10.1016/j.energy.2021.122303.   DOI
52 Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.   DOI
53 Naderipour, A., Abdul-Malek, Z., Noorden, Z.A., Davoudkhani, I.F., Nowdeh, S.A., Kamyab, H., Chelliapan, S. and Ghiasi, S.M.S. (2021c), "Carrier wave optimization for multi-level photovoltaic system to improvement of power quality in industrial environments based on Salp swarm algorithm", Environ. Technol. Innov., 21, 101197. https://doi.org/10.1016/j.eti.2020.101197.   DOI
54 Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020c), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347.   DOI
55 Najarkolaie, K.F., Mohammadi, M. and Fanaie, N. (2017), "Realistic behavior of infilled steel frames in seismic events: experimental and analytical study", Bull. Earthq. Eng., 15(12), 5365-5392. https://doi.org/10.1007/s10518-017-0173-z.   DOI
56 Shariati, M., Sulong, N.H.R. and Khanouki, M.M.A. (2012d), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.   DOI
57 Jahanbakhti, E., Fanaie, N. and Rezaeian, A. (2017), "Experimental investigation of panel zone in rigid beam to box column connection", J. Constr. Steel Res., 137, 180-191. https://doi.org/10.1016/j.jcsr.2017.06.025.   DOI
58 Shariati, M., Ramli-Sulong, N.H., Arabnejad, M.M., Shafigh, P. and Sinaei, H. (2011a), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Scientif. Res. Essay., 6(1), 213-220. https://doi.org/10.5897/sre10.879.   DOI
59 Shariati, M., Shariati, A., Sulong, N.H.R., Suhatril, M. and Khanouki, M.M.A. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.   DOI
60 Shariati, M., Sulong, N.H.R., Shariati, A. and Kueh, A.B.H. (2016b), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.   DOI
61 Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2012e), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.   DOI
62 Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.   DOI
63 Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T., Shariati, A. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652.   DOI
64 Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The content of heavy metals in cigarettes and the impact of their leachates on the aquatic ecosystem", Sustain., 14(8), 4752. https://doi.org/10.3390/su14084752.   DOI
65 Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019a), "UML diagrams for dynamical monitoring of rail vehicles", Physica A-Stat. Mech. Its Appl., 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.   DOI
66 Yalgin, S. (1983), "Using expended perlite in construction sector", Etibank, Ankara, April.
67 Shahabi, S., Sulong, N., Shariati, M., Mohammadhassani, M. and Shah, S. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. http://doi.org/10.12989/scs.2016.20.3.651.   DOI
68 Shariati, A., Barati, M. R., Ebrahimi, F. and Toghroli, A. (2020b), "Investigation of microstructure and surface effects on vibrational characteristics of nanobeams based on nonlocal couple stress theory", Adv. Nano Res., 8(3), 191-202. https://doi.org/10.12989/anr.2020.8.3.191.   DOI
69 Shariati, A., Ebrahimi, F., Hosseini, S.H.S., Toghroli, A. and Bayrami, S.S. (2020d), "On the nonlinear dynamics of viscoelastic graphene sheets conveying nanoflow: Parametric excitation analysis", Mech. Bas. Des. Struct. Mach., 1-18. https://doi.org/10.1080/15397734.2020.1728544.   DOI
70 Yavari, S., Asadpour, R., Kamyab, H., Yavari, S., Kutty, S.R.M., Baloo, L., ... & Sidik, A.B.C. (2021a), "Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil", Clean Technol. Environ. Policy, 1-10. http://doi.org/10.1007/s10098-021-02113-z.   DOI
71 Yavari, S., Kamyab, H., Asadpour, R., Yavari, S., Bin Sapari, N., Baloo, L., Abd Manan, T.S.B., Ashokkumar, V. and Chelliapan, S. (2021b), "The fate of imazapyr herbicide in the soil amended with carbon sorbents", Biomass Convers. Biorefin., 1-9. http://doi.org/10.1007/s13399-021-01587-7.   DOI
72 Anwar Hossain, K.M. (2004), "Properties of volcanic pumice based cement and lightweight concrete", Cement Concrete Res., 34(2), 283-291. https://doi.org/10.1016/j.cemconres.2003.08.004.   DOI
73 Shariati, M., Armaghani, D.J., Khandelwal, M., Zhou, J. and Khorami, M. (2021c), "Assessment of longstanding effects of fly ash and silica fume on the compressive strength of concrete using extreme learning machine and artificial neural network", J. Adv. Eng. Comput., 5(1), 50-74.   DOI
74 Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.   DOI
75 Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473-484. https://doi.org/10.12989/gae.2020.19.6.473.   DOI
76 Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518.   DOI
77 Fanaie, N. and Tahriri, M. (2017b), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1016/j.jcsr.2017.06.032.   DOI
78 Arabi-Nowdeh, S., Nasri, S., Saftjani, P.B., Naderipour, A., Abdul-Malek, Z., Kamyab, H. and Jafar-Nowdeh, A. (2021), "Multi-criteria optimal design of hybrid clean energy system with battery storage considering off- and on-grid application", J. Clean. Prod., 290, 125808. https://doi.org/10.1016/j.jclepro.2021.125808.   DOI
79 Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010c), "Investigation of seismic behaviour of Composite Structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel Composite Structures, 21-23.
80 Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.   DOI
81 Parichehreh, R., Gheshlaghi, R., Mahdavi, M.A. and Kamyab, H. (2021), "Investigating the effects of eleven key physicochemical factors on growth and lipid accumulation of Chlorella sp. as a feedstock for biodiesel production", J. Biotechnol., 340, 64-74. https://doi.org/10.1016/j.jbiotec.2021.08.010.   DOI
82 Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.   DOI
83 Naveen Kumar, H., Kattimani, S., Marques, F.D., Nguyen-Thoi, T. and Shariati, M. (2022), "Geometrically nonlinear study of functionally graded saturated porous plates based on refined shear deformation plate theory and Biot's theory", Int. J. Struct. Stab. Dyn., 2350013. https://doi.org/10.1142/S021945542350013X.   DOI
84 Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.   DOI
85 Sharma, S., Verma, A., Kumar, A. and Kamyab, H. (2018), "Magnetic nano-сomposites and their industrial applications", Nano Hybrid. Compos., 20, 149-172. https://doi.org/10.4028/www.scientific.net/NHC.20.149.   DOI
86 Shi, T., Liu, Y., Zhang, Y., Lan, Y., Zhao, Q., Zhao, Y. and Wang, H. (2022), "Calcined attapulgite clay as supplementary cementing material: thermal treatment, hydration activity and mechanical properties", Int. J. Concrete Struct. Mater., 16(1), 1-10. https://doi.org/10.1186/s40069-022-00499-8.   DOI
87 Karakoc, M.B. and Demirboga, R. (2010), "HSC with expanded perlite aggregate at wet and dry curing conditions", J. Mater. Civil Eng., 22(12), 1252-1259. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000134.   DOI
88 Ismail, M., Shariati, M., Awal, A.S.M.A., Chiong, C.E., Chahnasir, E.S., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.   DOI
89 Kamyab, H., Soltani, M., Ponraj, M., Din, M. and Putri, E.V. (2013), "A review on microalgae as potential lipid container with wastewater treating functions", J. Environ. Treat. Techniq., 1(2), 76-80.
90 Kamyab, H., Tin Lee, C., Md Din, M.F., Ponraj, M., Mohamad, S.E. and Sohrabi, M. (2014b), "Effects of nitrogen source on enhancing growth conditions of green algae to produce higher lipid", Desalin. Water Treat., 52(19-21), 3579-3584. https://doi.org/10.1080/19443994.2013.854030.   DOI
91 Wang, X., Yang, Y., Yang, R. and Liu, P. (2022b), "Experimental analysis of bearing capacity of basalt fiber reinforced concrete short columns under axial compression", Coating., 12(5), 654. https://doi.org/10.3390/coatings12050654.   DOI
92 Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022c), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech.-A/Solid., 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638.   DOI
93 Wang, Z., Wang, Q., Jia, C. and Bai, J. (2022d), "Thermal evolution of chemical structure and mechanism of oil sands bitumen", Energy, 123190. http://doi.org/10.1016/j.energy.2022.123190.   DOI
94 Shariati, A. (2014), "Behaviour of C-shaped angle shear connectors in high strength concrete", M.SC, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
95 Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z. and Shariati, A. (2021d), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524. https://doi.org/10.1016/j.compstruct.2021.114524.   DOI
96 Shahabi, S., Sulong, N., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. http://doi.org/10.12989/scs.2016.20.1.185.   DOI
97 Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.   DOI
98 Shariati, A., Barati, M.R., Ebrahimi, F., Singhal, A. and Toghroli, A. (2020a), "Investigating vibrational behavior of graphene sheets under linearly varying in-plane bending load based on the nonlocal strain gradient theory", Adv. Nano Res., 8(4), 265-276 https://doi.org/10.12989/anr.2020.8.4.265.   DOI
99 Shariati, A., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2020c), "Wave propagation analysis of electro-rheological fluid-filled sandwich composite beam", Mech. Bas. Des. Struct. Mach., 1-10. https://doi.org/10.1080/15397734.2020.1745646.   DOI
100 Shariati, A., Ebrahimi, F., Karimiasl, M., Selvamani, R. and Toghroli, A. (2020e), "On bending characteristics of smart magneto-electro-piezoelectric nanobeams system", Adv. Nano Res., 9(3), 183-191. https://doi.org/10.12989/anr.2020.9.3.183.   DOI
101 Toghroli, A., Nasirianfar, M.S., Shariati, A., Khorami, M., Paknahad, M., Ahmadi, M., Gharehaghaj, B. and Zandi, Y. (2020b), "Analysis of extended end plate connection equipped with SMA bolts using component method", Steel Compos. Struct., 36(2), 213-228. http://doi.org/10.12989/scs.2020.36.2.213.   DOI
102 Armaghani, D.J., Mirzaei, F., Toghroli, A. and Shariati, A. (2020b), "Indirect measure of shear strength parameters of fiber-reinforced sandy soil using laboratory tests and intelligent systems", Geomech. Eng., 22(5), 397-414. https://doi.org/10.12989/gae.2020.22.5.397.   DOI
103 Ali, A., Zhang, C., Bibi, T., Zhu, L., Cao, L., Li, C. and Hsiao, P.-C. (2022), "Investigation of five different low-cost locally available isolation layer materials used in sliding base isolation systems", Soil Dyn. Earthq. Eng., 154, 107127. https://doi.org/10.1016/j.soildyn.2021.107127.   DOI
104 Shi, X., Karachi, A., Hosseini, M., Yazd, M.S., Kamyab, H., Ebrahimi, M. and Parsaee, Z. (2020), "Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C3N4/MWCNT/Bi2WO6 based on CCD-RSM model", Ultrason. Sonochem., 68, 104460. https://doi.org/10.1016/j.ultsonch.2019.01.018   DOI
105 Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.   DOI
106 Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://doi.org/10.12989/scs.2014.17.5.623.   DOI
107 Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019o), "Estimation of moment and rotation of steel rack connections using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.   DOI
108 Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M.D., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B., Shariati, A. and Khorami, M. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.   DOI
109 Wu, Z., Xu, J., Li, Y. and Wang, S. (2022), "Disturbed state concept-based model for the uniaxial strain-softening behavior of fiber-reinforced soil", Int. J. Geomech., 22(7), 04022092. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002415.   DOI
110 Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M., Tahir, M. and Khorami, M. (2018a), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. http://doi.org/10.12989/scs.2018.27.3.389.   DOI
111 Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018a), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166 https://doi.org/10.1016/j.engfailanal.2017.08.014.   DOI
112 Suresh, G., Balasubramanian, B., Ravichandran, N., Ramesh, B., Kamyab, H., Velmurugan, P., Siva, G.V. and Ravi, A.V. (2021), "Bioremediation of hexavalent chromium-contaminated wastewater by Bacillus thuringiensis and Staphylococcus capitis isolated from tannery sediment", Biomass Convers. Biorefin., 11(2), 383-391. https://doi.org/10.1007/s13399-020-01259-y.   DOI
113 Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N. and Tahir, M. (2016a), "Shear capacity of C-shaped and L-shaped angle shear connectors", PloS one, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989.   DOI
114 Talaiekhozani, A., Keyvanfar, A., Andalib, R., Samadi, M., Shafaghat, A., Kamyab, H., ... & Hussin, M.W. (2014), "Application of Proteus mirabilis and Proteus vulgaris mixture to design self-healing concrete", Desalin. Water Treat., 52(19-21), 3623-3630. https://doi.org/10.1080/19443994.2013.854092.   DOI
115 Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020j), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.   DOI
116 Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.   DOI
117 Hosseini, S. A. and Toghroli, A. (2021), "Effect of mixing Nano-silica and Perlite with pervious concrete for nitrate removal from the contaminated water", Adv. Concrete Constr., 11(6), 531-544. https://doi.org/10.12989/acc.2021.11.6.531.   DOI
118 Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N. (2019c), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569   DOI
119 Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020i), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.   DOI
120 Shariati, A., Ebrahimi, F., Karimiasl, M., Vinyas, M. and Toghroli, A. (2020f), "On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading", Adv. Nano Res., 8(1), 49-58. https://doi.org/10.12989/anr.2020.8.1.049.   DOI
121 Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019e), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553 .   DOI
122 Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung Nguyen, T. (2020k), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.   DOI
123 Prasad, S., Kumar, S., Yadav, K.K., Choudhry, J., Kamyab, H., Bach, Q.V., Sheetal, K.R., Kannojiya, S. and Gupta, N. (2020), "Screening and evaluation of cellulytic fungal strains for saccharification and bioethanol production from rice residue", Energy, 190, 116422. https://doi.org/10.1016/j.energy.2019.116422.   DOI
124 Nouri, K., Sulong, N.H.R., Ibrahim, Z. and Shariati, M. (2021b), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38. https://doi.org/10.18057/Ijasc.2021.17.1.4.   DOI
125 Oktay, H., Yumrutas, R. and Akpolat, A. (2015), "Mechanical and thermophysical properties of lightweight aggregate concretes", Constr. Build. Mater., 96, 217-225. https://doi.org/10.1016/j.conbuildmat.2015.08.015.   DOI
126 Ponraj, M., Talaiekhozani, A., Rosli, M., Mohammad Zin, A.M. M., Keyvanfar, A. and Kamyab, H. (2015), "Bioconcrete strength, durability, permeability, recycling and effects on human health: A review", Int. Conf. Advances in Civil, Structural and Mechanical Engineering.
127 Priya, A., Anusha, G., Thanigaivel, S., Karthick, A., Mohanavel, V., Velmurugan, P., Balasubramanian, B., Ravichandran, M., Kamyab, H., Kirpichnikova, I.M. and Chelliapan, S. (2022), "Removing microplastics from wastewater using leading-edge treatment technologies: a solution to microplastic pollution-a review", Bioproc. Biosyst. Eng., 1-13. https://doi.org/10.1007/s00449-022-02715-x.   DOI
128 Partovi, F. and Fanaie, N. (2020), "Controlling deflection of long steel I-shaped girder bridge using two V-shaped pre-tensioning cables", J. Central South Univ., 27(2), 566-577. https://doi.org/10.1007/s11771-020-4317-y.   DOI
129 Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2013b), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.   DOI
130 Tavakkoli, O., Kamyab, H., Shariati, M., Mohamed, A.M. and Junin, R. (2022), "Effect of nanoparticles on the performance of polymer/surfactant flooding for enhanced oil recovery: A review", Fuel, 312, 122867. https://doi.org/10.1016/j.fuel.2021.122867.   DOI
131 Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. http://doi.org/10.12989/scs.2019.30.5.433.   DOI
132 Xu, H., Wang, X.Y., Liu, C.N., Chen, J.N. and Zhang, C. (2021a), "A 3D root system morphological and mechanical model based on L-Systems and its application to estimate the shear strength of root-soil composites", Soil Tillage Res., 212, 105074. http://doi.org/10.1016/j.still.2021.105074.   DOI
133 Karimi, H., Rahmani, R., Othman, M.F., Zohoori, B., Mahrami, M., Kamyab, H. and Hosseini, S.E. (2016), "An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks", Plasmonic., 11(1), 95-102. https://doi.org/10.1007/s11468-015-9998-y.   DOI
134 Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019a), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 36, 1539-1558 https://doi.org/10.1007/s00366-019-00780-7.   DOI
135 Ji, X., Cheng, Y., Tian, J., Zhang, S., Jing, Y. and Shi, M. (2021), "Structural characterization of polysaccharide from jujube (Ziziphus jujuba Mill.) fruit", Chem. Biolog. Technol. Agricult., 8(1), 1-7. https://doi.org/10.1186/s40538-021-00255-2.   DOI
136 Huang, H., Huang, M., Zhang, W. and Yang, S. (2021), "Experimental study of predamaged columns strengthened by HPFL and BSP under combined load cases", Struct. Infrastr. Eng., 17(9), 1210-1227. https://doi.org/10.1080/15732479.2020.1801768.   DOI
137 Jafar-Nowdeh, A., Babanezhad, M., Arabi-Nowdeh, S., Naderipour, A., Kamyab, H., Abdul-Malek, Z. and Ramachandaramurthy, V.K. (2020), "Meta-heuristic matrix moth-flame algorithm for optimal reconfiguration of distribution networks and placement of solar and wind renewable sources considering reliability", Environ. Technol. Innov., 20, 101118. https://doi.org/10.1016/j.eti.2020.101118.   DOI
138 Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/IJPS11.1324.   DOI
139 Alqadi, M.A., Mat Taib, S., Md Din, M.F. and Kamyab, H. (2018), "Effect of photoperiod on the growth of chlamydomonas incerta and pollutant removal", Malay. J. Civil Eng., 29, https://doi.org/10.11113/mjce.v29.15683.   DOI
140 Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010b), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168-170, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.   DOI
141 Armaghani, D.J., Mirzaei, F., Shariati, M., Trung, N.T., Shariati, M. and Trnavac, D. (2020a), "Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber", Geomech. Eng., 20(3), 191-205. https://doi.org/10.12989/gae.2020.20.3.191.   DOI
142 Shariati, A., Hosseini, S.H.S., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2021a), "Effect of residual surface stress on parametrically excited nonlinear dynamics and instability of viscoelastic piezoelectric nanoelectromechanical resonators", Eng. Comput., 37(3), 1835-1850. https://doi.org/10.1007/s00366-019-00916-9.   DOI
143 Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020m), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.   DOI
144 Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020o), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155.   DOI
145 Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020r), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183 .   DOI
146 Shariati, A., Hosseini, S.H.S., Ebrahimi, F. and Toghroli, A. (2021b), "Nonlinear dynamics and vibration of reinforced piezoelectric scale-dependent plates as a class of nonlinear Mathieu-Hill systems: parametric excitation analysis", Eng. Comput., 37(3), 2285-2301. https://doi.org/10.1007/s00366-020-00942-y.   DOI
147 Shariati, A., Qaderi, S., Ebrahimi, F. and Toghroli, A. (2020g), "On buckling characteristics of polymer composite plates reinforced with graphene platelets", Eng. Comput.,, 1-12. https://doi.org/10.1007/s00366-020-00992-2.   DOI
148 Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017). Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering- CSM 2017, Zurich, Switzerland.
149 Shariati, M., Ramli Sulong, N., Arabnejad Khanouki, M. and Shariati, A. (2011b), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural. Engineering and Mechanics (ASEM'11+), Seoul, South Korea.
150 Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010b). "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel Composite Structures, Sydney, July.
151 Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Tonnizam Mohamad, E. and Khorami, M. (2018a), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. http://doi.org/10.12989/sss.2018.22.4.433.   DOI
152 Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020a), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.   DOI
153 Rakhmania, Kamyab, H., Yuzir, M.A., Abdullah, N., Quan, L.M., Riyadi, F.A. and Marzouki, R. (2022), "Recent applications of the electrocoagulation process on agro-based industrial wastewater: A review", Sustain., 14(4), 1985. https://doi.org/10.3390/su14041985.   DOI
154 Rawat, I., Gupta, S.K., Shriwastav, A., Singh, P., Kumari, S. and Bux, F. (2016). Microalgae Applications in Wastewater Treatment, Algae Biotechnology. Springer, Cham.
155 Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Khanouki, M.M.A. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.   DOI
156 Kazerani, S., Fanaie, N. and Soroushnia, S. (2017), "Seismic behavior of drilled beam section in moment connections", Int. J. Numer. Meth. Civil Eng., 1(4), 1-6. https://doi.org/10.29252/nmce.1.4.1.   DOI
157 Khonsari, V., Eslami, E. and Anvari, A. (2010), "Effects of expanded perlite aggregate (EPA) on the mechanical behavior of lightweight concrete", Proceedings of the 7th International Conference on Fracture and Mechanics of Concrete & Concrete Structure (FraMCoS-7), Jeju, Korea.
158 Moghadam, H., Fanaei, N. and Motazedian, D. (2010), "Estimation of stress drop for some large shallow earthquakes using stochastic point source and finite fault modeling", Scientia Iranica, 17(3).
159 Mohammadi, Y., Carkon-Azad, R., Singh, S.P. and Kaushik, S.K. (2009), "Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio", Constr. Build. Mater., 23(1), 183-189. https://doi.org/10.1016/j.conbuildmat.2008.01.002.   DOI
160 Mojaveryazdia, F.S., Zainb, N.A.B.M. and Rezaniac, S. (2013), "Production of biodegradable polymers (PHA) through low cost carbon sources: Green chemistry", Int. J., 4(3).
161 Morteza, N., Kia Moghaddas, N., Mahdi, S. and Ali, T. (2020), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.   DOI
162 Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018a), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. http://doi.org/10.12989/scs.2018.28.4.439   DOI
163 Fanaie, N., Kazerani, S. and Soroushnia, S. (2017a), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Numer. Meth. Civil Eng., 1(3), 16-23. https://doi.org/10.29252/nmce.1.3.16.   DOI
164 Hadibarata, T., Khudhair, A.B., Kristanti, R.A. and Kamyab, H. (2017), "Biodegradation of pyrene by Candida sp. S1 under high salinity conditions", Bioproc. Biosyst. Eng., 40(9), 1411-1418. https://doi.org/10.1007/s00449-017-1798-7.   DOI
165 Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Clean. Prod., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.   DOI
166 Muhammad, N.Z., Shafaghat, A., Keyvanfar, A., Majid, M.Z.A., Ghoshal, S., Yasouj, S.E.M., Ganiyu, A.A., Kouchaksaraei, M. S., Kamyab, H. and Taheri, M.M. (2016), "Tests and methods of evaluating the self-healing efficiency of concrete: A review", Constr. Build. Mater., 112, 1123-1132. https://doi.org/10.1016/j.conbuildmat.2016.03.017.   DOI
167 Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Various types of shear connectors in composite structurals: A review", Int. J. Phys. Sci., 7(22), 2876-2890. https://doi.org/10.5897/IJPSx11.004.   DOI
168 Shariati, A., Shariati, M., Sulong, N.H.R., Suhatril, M., Khanouki, M.M.A. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036.   DOI
169 Shariati, A., Sulong, N., Suhatril, M. and Shariati, M. (2012b), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. https://doi.org/10.5897/IJPS11.1604.   DOI
170 Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V.M., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.   DOI
171 Shah, S., Sulong, N.R., Shariati, M. and Jumaat, M. (2015a), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.   DOI
172 Rezania, S., Kamyab, H., Rupani, P.F., Park, J., Nawrot, N., Wojciechowska, E., ... & Cabral-Pinto, M.M. (2021), "Recent advances on the removal of phosphorus in aquatic plant-based systems", Environ. Technol. Innov., 24, 101933. https://doi.org/10.1016/j.eti.2021.101933.   DOI
173 Ray, A., Sriravindrarajah, R., Guerbois, J.P., Thomas, P., Border, S., Ray, H., Haggman, J. and Joyce, P. (2007), "Evaluation ofwaste perlite fines in the production of construction materials", J. Therm. Anal. Calorim., 88(1), 279-283. https://doi.org/10.1007/s10973-006-8107-z.   DOI
174 Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020a), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.   DOI
175 Rezania, S., Din, M.F.M., Mohamad, S.E., Sohaili, J., Taib, S.M., Yusof, M.B.M., Kamyab, H., Darajeh, N. and Ahsan, A. (2017), "Review on pretreatment methods and ethanol production from cellulosic water hyacinth", BioResour., 12(1), 2108-2124.   DOI
176 Quan, L.M., Kamyab, H., Yuzir, A., Ashokkumar, V., Hosseini, S.E., Balasubramanian, B. and Kirpichnikova, I. (2022), "Review of the application of gasification and combustion technology and waste-to-energy technologies in sewage sludge treatment", Fuel, 316, 123199. https://doi.org/10.1016/j.fuel.2022.123199.   DOI
177 Roudi, A.M., Kamyab, H., Chelliapan, S., Ashokkumar, V., Kumar, A., Yadav, K.K. and Gupta, N. (2020), "Application of response surface method for Total organic carbon reduction in leachate treatment using Fenton process", Environ. Technol. Innov., 19, 101009. https://doi.org/10.1016/j.eti.2020.101009.   DOI
178 Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.   DOI
179 Mou, B. and Bai, Y.T. (2018), "Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone", Eng. Struct., 168, 487-504. https://doi.org/10.1016/j.engstruct.2018.04.029.   DOI
180 Naderipour, A., Abdul-Malek, Z., Arshad, R.N., Kamyab, H., Chelliapan, S., Ashokkumar, V. and Tavalaei, J. (2021a), "Assessment of carbon footprint from transportation, electricity, water, and waste generation: Towards utilisation of renewable energy sources", Clean Technol. Environ. Policy, 23(1), 183-201. https://doi.org/10.1007/s10098-020-02017-4 .   DOI
181 Li, D.Y., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019c), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.   DOI
182 Libre, N.A., Shekarchi, M., Mahoutian, M. and Soroushian, P. (2011), "Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice", Constr. Build. Mater., 25(5), 2458-2464. https://doi.org/10.1016/j.conbuildmat.2010.11.058.   DOI
183 Lin, X.M., Kireeva, N., Timoshin, A.V., Naderipour, A., Abdul-Malek, Z. and Kamyab, H. (2021), "A multi-criteria framework for designing of stand-alone and grid-connected photovoltaic, wind, battery clean energy system considering reliability and economic assessment", Energy, 224, 120154. https://doi.org/10.1016/j.energy.2021.120154.   DOI
184 Shah, S.N.R., Sulong, N.H.R., Shariati, M. and Jumaat, M.Z. (2015b), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422   DOI
185 Zhang, W. and Tang, Z. (2021a), "Numerical modeling of response of CFRP-Concrete interfaces subjected to fatigue loading", J. Compos. Constr., 25(5), 04021043. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001154.   DOI
186 Kamyab, H., Chelliapan, S., Din, M.F.M., Lee, C.T., Rezania, S., Khademi, T. and Bong, C.P.C. (2018a), "Isolate new microalgal strain for biodiesel production and using FTIR spectroscopy for assessment of pollutant removal from palm oil mill effluent (POME)", Chem. Eng. Trans., 63, 91-96.
187 Shariati, M. (2008a), "Assessment building using none-destructive test techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)", Universiti Putra Malaysia.
188 Shah, S.N.R., Ramli Sulong, N.H., Khan, R., Jumaat, M.Z. and Shariati, M. (2016a), "Behavior of industrial steel rack connections", Mech. Syst. Signal Pr., 70-71, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.   DOI
189 Shah, S.N.R., Sulong, N.H.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016d), "Behavior of Industrial Steel Rack Connections", Mech. Syst. Signal Pr., 70-71, 725-740 https://doi.org/10.1016/j.ymssp.2015.08.026.   DOI
190 Shahabaldin, R., Mohd, F., Shazwin, M.T., Shaza, E.M., Farrah, A.D., Hesam, K., Negisa, D. and Shirin, S.E. (2018), "Ethanol production from water hyacinth (Eichhornia crassipes) using various types of enhancers based on the consumable sugars", Wast. Biomass Valoriz., 9(6), 939-946. https://doi.org/10.1007/s12649-017-9883-3.   DOI
191 Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., ... & Poi-Ngian, S. (2019g), "Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.   DOI
192 Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020u), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.   DOI
193 Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012c), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
194 Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: Experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.   DOI
195 Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016a), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.   DOI
196 Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011e), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.   DOI
197 Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011c), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientif. Res. Essay., 6(4), 977-983.
198 Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413.   DOI
199 Lu, N., Wang, H., Wang, K. and Liu, Y. (2021), "Maximum probabilistic and dynamic traffic load effects on short-to-medium span bridges", Comput. Model. Eng. Sci., 127(1), 345-360. https://doi.org/10.32604/cmes.2021.013792.   DOI
200 Lo, T.Y., Tang, W.C. and Cui, H.Z. (2007), "The effects of aggregate properties on lightweight concrete", Build. Environ., 42(8), 3025-3029. https://doi.org/10.1016/j.buildenv.2005.06.031.   DOI
201 Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019a), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. http://doi.org/10.12989/scs.2019.30.3.271.   DOI
202 Mahdi, S., Arian, H., Yousef, Z., Hossein, L., Ali, T., Peiman, K., Maryam, S., Musab, N.A.S. and Shek, P.N. (2019a), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.   DOI
203 Mahdi, S., Mostafa, G., Morteza, N., Nasrollah, A. and Ali, T. (2020), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.   DOI
204 Mahdi, S., Shervin Safaei, F., Peyman, M., Seyedmasoud, B., Yousef, Z., Davood Rezaee, M., Ali, T., Nguyen-Thoi, T. and Musab, N.A.S. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.   DOI
205 Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., 19(6), 533-542. https://doi.org/10.12989/gae.2019.19.6.533   DOI
206 Kamyab, H., Chelliapan, S., Shahbazian-Yassar, R., Din, M.F.M., Khademi, T., Kumar, A. and Rezania, S. (2017b), "Evaluation of lipid content in microalgae biomass using palm oil mill effluent (Pome)", Jom, 69(8), 1361-1367. https://doi.org/10.1007/s11837-017-2428-1.   DOI
207 Resdi, R., Lim, J.S., Kamyab, H., Lee, C.T., Hashim, H., Mohamad, N. and Ho, W.S. (2016), "Review of microalgae growth in palm oil mill effluent for lipid production", Clean Technol. Environ. Policy, 18(8), 2347-2361. https://doi.org/10.1007/s10098-016-1204-1.   DOI
208 Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M. and Poi-Ngian, S. (2019i), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.   DOI
209 Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020v), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., 34(3), 377-391. https://doi.org/10.12989/scs.2020.34.3.377.   DOI
210 Shariati, M., Rafiei, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N.T., Salih, M.N., Mehrabi, P. and Poi-Ngian, S. (2019n), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225 .   DOI
211 Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020b), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Stat. Mech. Its Appl., 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.   DOI
212 Sajedi, F. and Shariati, M. (2019a), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.   DOI
213 Shariati, M., Ramli Sulong, N. H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013a), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.   DOI
214 Khudhair, A.B., Hadibarata, T., Yusoff, A.R.M., Teh, Z.C., Adnan, L.A. and Kamyab, H. (2015), "Pyrene metabolism by new species isolated from soil Rhizoctonia zeae SOL3", Water Air Soil Pollut., 226(6), 1-9. https://doi.org/10.1007/s11270-015-2432-4.   DOI
215 Kramar, D. and Bindiganavile, V. (2013), "Impact response of lightweight mortars containing expanded perlite", Cement Concrete Compos., 37, 205-214. https://doi.org/10.1016/j.cemconcomp.2012.10.004.   DOI
216 Kumar, A., Gudiukaite, R., Gricajeva, A., Sadauskas, M., Malunavicius, V., Kamyab, H., Sharma, S., Sharma, T. and Pant, D. (2020), "Microbial lipolytic enzymes-promising energy-efficient biocatalysts in bioremediation", Energy, 192, 116674. https://doi.org/10.1016/j.energy.2019.116674.   DOI
217 Manikandan, V., Balasubramanian, B., Bharti, B., Velmurugan, P., Elango, D., Baskaran, R., Kamyab, H., Abdellattif, M. H., Chelliapan, S. and Jayanthi, P. (2022), "Development of ZnO/MOGAC nanocomposites for enhanced photocatalytic removal of PO43- and NO3-ions from wastewater under various light irradiations", Biomass Convers. Biorefin., 1-18.
218 Luo, Y., Zheng, H., Zhang, H. and Liu, Y. (2021), "Fatigue reliability evaluation of aging prestressed concrete bridge accounting for stochastic traffic loading and resistance degradation", Adv. Struct. Eng., 24(13), 3021-3029. http://doi.org/10.1177/13694332211017995.   DOI
219 Ghanbari-Ghazijahani, T., Nabati, A., Azandariani, M.G. and Fanaie, N. (2020), "Crushing of steel tubes with different infills under partial axial loading", Thin Wall. Struct., 149, 106614. https://doi.org/10.1016/j.tws.2020.106614.   DOI
220 Krishnan, S., Md Din, M.F., Taib, S.M., Nasrullah, M., Sakinah, M., Wahid, Z.A., Kamyab, H., Chelliapan, S., Rezania, S. and Singh, L. (2019), "Accelerated two-stage bioprocess for hydrogen and methane production from palm oil mill effluent using continuous stirred tank reactor and microbial electrolysis cell", J. Clean. Prod., 229, 84-93. https://doi.org/10.1016/j.jclepro.2019.04.365.   DOI
221 Lan, Y., Zheng, B., Shi, T., Ma, C., Liu, Y. and Zhao, Z. (2022), "Crack resistance property of carbon nanotubes-modified concrete", Mag. Concrete Res., 1-11. http://doi.org/10.1680/jmacr.21.00227.   DOI
222 Leila, R., Morteza, N., Mahdi, S. and Maryam, S. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. http://doi.org/10.12989/sem.2020.74.2.145.   DOI
223 Khoshnava, S.M., Rostami, R., Zin, R.M., Kamyab, H., Abd Majid, M.Z., Yousefpour, A. and Mardani, A. (2020), "Green efforts to link the economy and infrastructure strategies in the context of sustainable development", Energy, 193, 116759. https://doi.org/10.1016/j.energy.2019.116759.   DOI
224 Kamyab, H., Chelliapan, S., Lee, C.T., Khademi, T., Kumar, A., Yadav, K.K., Rezania, S., Kumar, S. and Ebrahimi, S.S. (2019b), "Improved production of lipid contents by cultivating Chlorella pyrenoidosa in heterogeneous organic substrates", Clean Technol. Environ. Policy, 21(10), 1969-1978. https://doi.org/10.1007/s10098-019-01743-8.   DOI
225 Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M.M. and Petkovic, D. (2019), "RETRACTED ARTICLE: Analysis of influential factors forpredicting the shear strength of a V-shaped angle shear connector in composite beamsusing an adaptive neuro-fuzzy technique", J. Intel. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6.   DOI
226 Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech.-A/Solid., 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.   DOI
227 Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.   DOI
228 Mishra, A.R., Mardani, A., Rani, P., Kamyab, H. and Alrasheedi, M. (2021), "A new intuitionistic fuzzy combinative distance-based assessment framework to assess low-carbon sustainable suppliers in the maritime sector", Energy, 237, 121500. https://doi.org/10.1016/j.energy.2021.121500.   DOI
229 Athar, M., Imdad, S., Zaidi, S., Yusuf, M., Kamyab, H., Jaromir Klemes, J. and Chelliapan, S. (2022), "Biodiesel production by single-step acid-catalysed transesterification of Jatropha oil under microwave heating with modelling and optimisation using response surface methodology", Fuel, 322, 124205. https://doi.org/10.1016/j.fuel.2022.124205.   DOI
230 Asadolahi, S.M. and Fanaie, N. (2020), "Performance of self-centering steel moment frame considering stress relaxation in prestressed cables", Adv. Struct. Eng., 23(9), 1813-1822. https://doi.org/10.1177/1369433219900940   DOI
231 Bao-guo, M., Hong-bo, Z. and Rong-zhen, D. (2002), "Development of a high sound absorption material CEMCOM", J. Wuhan Univ. Technol.-Mater. Sci. Ed., 17(4), 5-8.
232 Kamyab, H., Din, M.F.M., Hosseini, S.E., Ghoshal, S.K., Ashokkumar, V., Keyvanfar, A., Shafaghat, A., Lee, C.T., Bavafa, A.A. and Majid, M.Z.A. (2016b), "Optimum lipid production using agro-industrial wastewater treated microalgae as biofuel substrate", Clean Technol. Environ. Policy, 18(8), 2513-2523. https://doi.org/10.1007/s10098-016-1212-1.   DOI
233 Zhou, L., Kamyab, H., Surendar, A., Maseleno, A., Ibatova, A Z., Chelliapan, S., Karachi, N. and Parsaee, Z. (2019), "Novel Z-scheme composite Ag2CrO4/NG/polyimide as high performance nano catalyst for photoreduction of CO2: Design, fabrication, characterization and mechanism", J. Photochem. Photobiol. A: Chem., 368, 30-40. https://doi.org/10.1016/j.jphotochem.2018.09.006.   DOI
234 Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.   DOI
235 Zhang, W., Tang, Z., Yang, Y., Wei, J. and Stanislav, P. (2021b), "Mixed-mode debonding behavior between CFRP plates and concrete under fatigue loading", J. Struct. Eng., 147(5), 04021055. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003032.   DOI
236 Kamyab, H., Din, M.F.M., Tin, C.L., Ponraj, M., Soltani, M., Mohamad, S.E. and Roudi, A.M. (2014a), "Micro-macro algal mixture as a promising agent for treating POME discharge and its potential use as animal feed stock enhancer", J. Teknologi, 68(5), https://doi.org/10.11113/jt.v68.3021.   DOI
237 Kamyab, H., Friedler, F., Klemes, J.J., Chelliapan, S. and Rezania, S. (2018b), "Bioenergy production and nutrients removal by green microalgae with cultivation from agro-wastewater palm oil mill effluent (POME)-A review", Chem. Eng. Trans., 70, 2197-2202.
238 Kamyab, H., Klemes, J.J., Fan, Y.V. and Lee, C.T. (2020), "Transition to sustainable energy system for smart cities and industries", Energy, 207, 118104. https://doi.org/10.1016/j.energy.2020.118104.   DOI
239 Feng, J., Chen, B., Sun, W. and Wang, Y. (2021), "Microbial induced calcium carbonate precipitation study using Bacillus subtilis with application to self-healing concrete preparation and characterization", Constr. Build. Mater., 280, 122460. https://doi.org/10.1016/j.conbuildmat.2021.122460.   DOI
240 Kamyab, H., Goh, R.K.Y., Wong, J.H., Lim, J.S., Khademi, T., Ho, W.S., Ahmad, R., Hashim, H., Ho, C.S. and Lee, C.T. (2015a), "Cost-benefit and greenhouse-gases mitigation of food waste composting: A case study in Malaysia", Chem. Eng. Trans., 45, 577-582.
241 Sinaei, H., Shariati, M., Abna, A H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Scientif. Res. Essay., 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.   DOI
242 Kamyab, H., Din, M.F.M., Ghoshal, S.K., Lee, C.T., Keyvanfar, A., Bavafa, A.A., Rezania, S. and Lim, J.S. (2016a), "Chlorella pyrenoidosa mediated lipid production using Malaysian agricultural wastewater: effects of photon and carbon", Wast. Biomass Valoriz., 7(4), 779-788. https://doi.org/10.1007/s12649-016-9556-7.   DOI
243 Kumar, A., Sharma, T., Mulla, S.I., Kamyab, H., Pant, D. and Sharma, S. (2019), "Let's protect our earth: Environmental challenges and implications", Microbes and Enzymes in Soil Health and Bioremediation, Springer, Singapore.
244 Pushparaj, K., Liu, W.C., Meyyazhagan, A., Orlacchio, A., Pappusamy, M., Vadivalagan, C., Robert, A.A., Arumugam, V.A., Kamyab, H., Klemes, J.J., Khademi, T., Mesbah, M., Chelliapan, S. and Balasubramanian, B. (2022), "Nano- from nature to nurture: A comprehensive review on facets, trends, perspectives and sustainability of nanotechnology in the food sector", Energy, 240, 122732. https://doi.org/10.1016/j.energy.2021.122732.   DOI
245 Xu, J., Wu, Z., Chen, H., Shao, L., Zhou, X. and Wang, S. (2021b), "Study on strength behavior of basalt fiber-reinforced loess by digital image technology (DIT) and scanning electron microscope (SEM)", Arab. J. Sci. Eng., 46(11), 11319-11338 https://doi.org/10.1007/s13369-021-05787-1.   DOI
246 Khorami, M., Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M.M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. http://doi.org/10.12989/eas.2017.13.6.531.   DOI
247 Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017d), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.   DOI
248 Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. M. (2017b), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. http://doi.org/10.12989/scs.2017.23.1.067.   DOI
249 Yadav, V.K., Yadav, K.K., Alam, J., Cabral-Pinto, M., Gnanamoorthy, G., Alhoshan, M., ... & Shukla, A.K. (2021), "Transformation of hazardous sacred incense sticks ash waste into less toxic product by sequential approach prior to their disposal into the water bodies", Environ. Sci. Pollut. Res., 1-13. https://doi.org/10.1007/s11356-021-15009-8.   DOI
250 Singh, J., Kumar, V., Kumar, P., Kumar, P., Yadav, K.K., Cabral-Pinto, M.M., Kamyab, H. and Chelliapan, S. (2021), "An experimental investigation on phytoremediation performance of water lettuce (Pistia stratiotes L.) for pollutants removal from paper mill effluent", Water Environ. Res., 93(9), 1543-1553. https://doi.org/10.1002/wer.1536.   DOI
251 Sohel, K., Al-Jabri, K., Zhang, M. and Liew, J.R. (2018), "Flexural fatigue behavior of ultra-lightweight cement composite and high strength lightweight aggregate concrete", Constr. Build. Mater., 173, 90-100. https://doi.org/10.1016/j.conbuildmat.2018.03.276.   DOI
252 Sohrabi, M., Kamyab, H., Janalizadeh, N. and Huyop, F.Z. (2012), "Bacterial desulfurization of organic sulfur compounds exist in fossil fuels", J. Pure Appl. Microbiol., 6(2), 717-729.
253 Soltani, M., Kamyab, H. and El-Enshasy, H.A. (2013), "Molecular weight (Mw) and Monosaccharide composition (MC): Two major factors affecting the therapeutic action of polysaccharides extracted from Cordyceps sinensis", J. Pure Appl. Microbiol., 7(3), 1601-1613.
254 Soni, A., Das, P.K., Hashmi, A.W., Yusuf, M., Kamyab, H. and Chelliapan, S. (2022), "Challenges and opportunities of utilizing municipal solid waste as alternative building materials for sustainable development goals: A review", Sustain. Chem. Pharm., 27, 100706. https://doi.org/10.1016/j.scp.2022.100706.   DOI
255 Suhatril, M., Osman, N., Azura Sari, P., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geolog. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.   DOI
256 Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019b), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. http://doi.org/10.12989/sem.2019.70.5.639.   DOI
257 Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 29(8), 1793-1801. http://doi.org/10.1007/s10845-016-1217-y.   DOI
258 Topcu, I.B. and Isikdag, B. (2007), "Manufacture of high heat conductivity resistant clay bricks containing perlite", Build. Environ., 42(10), 3540-3546. https://doi.org/10.1016/j.buildenv.2006.10.016.   DOI
259 Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019a), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. http://doi.org/10.12989/sss.2019.24.3.415.   DOI
260 Vasseghian, Y., Le, V.T., Joo, S.W., Dragoi, E.N., Kamyab, H., Chelliapan, S. and Klemes, J.J. (2022), "Spotlighting graphene-based catalysts for the mitigation of environmentally hazardous pollutants to cleaner production: A review", J. Clean. Prod., 365, 132702. https://doi.org/10.1016/j.jclepro.2022.132702.   DOI