1 |
Rackwitz, R. and Cuntze, R. (1987), "Formulations of reliability-oriented optimization", Eng. Optim., 11(1-2), 69-76. https://doi.org/10.1080/03052158708941037.
DOI
|
2 |
ISO 2394 (2015), General Principles on Reliability of Structures, International Organization for Standardization, Geneva, Switzerland.
|
3 |
Ellingwood, B.R. (2000), "LRFD: implementing structural reliability in professional practice", Eng. Struct., 22(2), 106-115. https://doi.org/10.1016/S0141-0296(98)00099-6.
DOI
|
4 |
Melchers, R.E. (1999), Structural Reliability Analysis and Prediction, 2nd Edition, John Wiley & Sons, UK.
|
5 |
AIJ (2016), Guidebook of Recommendations for Loads on Buildings, Architectural Institute of Japan, Tokyo, Japan. (in Japanese)
|
6 |
Ellingwood, B.R. (1996), "Reliability-based condition assessment and LRFD for existing structures", Struct. Saf., 18(2-3), 67-80. https://doi.org/10.1016/0167-4730(96)00006-9.
DOI
|
7 |
ACI 318 (2014), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, MI, USA.
|
8 |
Ang, A.H.S. and Tang, W.H. (1984), Probability Concepts in Engineering Planning and Design, Vol. II- Decision, Risk, and Reliability, J. Wiley & Sons, New York.
|
9 |
Assakkaf, I.A., Ayyub, B.M., Hess, P.E. and Atua, K. (2002), "Reliability-based load and resistance factor design (LRFD) guidelines for stiffened panels and grillages of ship structures", Nav. Eng. J., 114(2), 89-112. https://doi.org/10.1111/j.1559-3584.2002.tb00126.x.
DOI
|
10 |
Azadi, M., Ghasemi, S.H. and Mohammadi, M. (2020), "Reliability analysis of tunnels with consideration of the earthquakes extreme events", Geomech. Eng., 22(5), 433-439. https://doi.org/10.12989/gae.2020.22.5.433.
DOI
|
11 |
Tichy, M. (1994), "First-order third-moment reliability method", Struct. Saf., 16(3), 189-200. https://doi.org/10.1016/0167-4730(94)00021-H.
DOI
|
12 |
AIJ (2002), Recommendations for Limit State Design of Buildings, Architectural Institute of Japan, Tokyo, Japan. (in Japanese)
|
13 |
EN 1990 (2002), Eurocode-Basis of Structural Design, European Committee for Standardization, Brussels, Belgium.
|
14 |
Hong, H.P., Ye, W. and Li, S.H. (2016), "Sample size effect on the reliability and calibration of design wind load", Struct. Infrastr. Eng., 12(6), 752-764. https://doi.org/10.1080/15732479.2015.1050039.
DOI
|
15 |
Kim, W.S., Laman, J.A. and Park, J.Y. (2014), "Reliability-based design of prestressed concrete girders in integral abutment bridges for thermal effects", Struct. Eng. Mech., 50(3), 305-322. https://doi.org/10.12989/sem.2014.50.3.305.
DOI
|
16 |
Mori, Y., Tajiri, H. and Mizutani, Y. (2017), "Practical method for load and resistance factors using shifted lognormal approximation", Proceedings of the 12th International Conference on Structural Safety and Reliability, Vienna, Austria, August.
|
17 |
Ayyub, B.M., Assakkaf, I.A., Sikora, J.P., Adamchak, J.C., Atua, K., Melton, W. and Hess, P.E. (2002), "Reliability-based load and resistance factor design (LRFD) guidelines for hull girder bending", Nav. Eng. J., 114(2), 43-68. https://doi.org/10.1111/j.1559-3584.2002.tb00124.x.
DOI
|
18 |
ANSI/AISC 360 (2005), Specification for Structural Steel Buildings, American Institute of Steel Construction, Chicago, USA.
|
19 |
ASCE/SEI 7-10 (2010), Minimum Design Loads for Buildings and other Structures, American Society of Civil Engineers, Reston, USA.
|
20 |
Ayyub, B.M. and White, G.J. (1987), "Reliability-conditioned partial safety factors", J. Struct. Eng., 113(2), 279-294. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:2(279).
DOI
|
21 |
Gino, D., Castaldo, P., Bertagnoli, G., Giordano, L. and Mancini, G. (2020), "Partial factor methods for existing structures according to fib Bulletin 80: assessment of an existing prestressed concrete bridge", Struct. Concrete, 21(1), 15-31. https://doi.org/10.1002/suco.201900231.
DOI
|
22 |
Caspeele, R., Sykora, M., Allaix, D.L. and Steenbergen, R. (2013), "The design value method and adjusted partial factor approach for existing structures", Struct. Eng. Int., 23(4), 386-393. https://doi.org/10.2749/101686613X13627347100194.
DOI
|
23 |
Chiu, C.K., Tu, F.C. and Zhuang, Y.T. (2016), "Reliability-based design method of suppressing chloride ingress for reinforced concrete buildings located in coastal regions of Taiwan", Struct. Infrastr. Eng., 12(2), 188-207. https://doi.org/10.1080/15732479.2014.1002793.
DOI
|
24 |
Ellingwood, B.R. and Galambos, T.V. (1982), "Probability-based criteria for structural design", Struct. Saf., 1(1), 15-26. https://doi.org/10.1016/0167-4730(82)90012-1.
DOI
|
25 |
Zhao, Y.G. and Lu, Z.H. (2011), "Estimation of load and resistance factors using the third-moment method based on the 3P-lognormal distribution", Front. Arch. Civil Eng. China, 5(3), 315-322. https://doi.org/10.1007/s11709-011-0117-7.
DOI
|
26 |
Xu, J. and Dang, C. (2019), "A new bivariate dimension reduction method for efficient structural reliability analysis", Mech. Syst. Signal Pr., 115, 281-300. https://doi.org/10.1016/j.ymssp.2018.05.046.
DOI
|
27 |
Sakka, Z.I., Assakkaf, I.A. and Qazweeni, J.S. (2018), "Reliability-based assessment of damaged concrete buildings", Struct. Eng. Mech., 65(6), 751-760. https://doi.org/10.12989/sem.2018.65.6.751.
DOI
|
28 |
Zhao, Y.G. and Ono, T. (2000), "Third-moment standardization for structural reliability analysis", J. Struct. Eng., 126(6), 724-732. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(724).
DOI
|
29 |
Zhao, Y.G., Lu, Z.H. and Ono, T. (2006), "Estimating load and resistance factors without using distributions of random variables", J. Asian Arch. Build. Eng., 5(2), 325-332. https://doi.org/10.3130/jaabe.5.325.
DOI
|
30 |
Zhao, Y.G., Lu, Z.H. and Ono, T. (2007), "First three moments of some commonly used performance functions", J. Struct. Constr. Eng., 72(617), 31-37. https://doi.org/10.3130/aijs.72.31_3.
DOI
|
31 |
Higashi, Y., Mori, Y. and Tajiri, H. (2018), "Study on practical method for load and resistance factors using shifted lognormal approximation", Summaries of Technical Papers of Annual Meeting AIJ, Sendai, Japan, September.
|
32 |
Hu, Z.W. and Du, X.P. (2019), "A partial safety factor method for system reliability prediction with outsourced components", ASCE-ASME J. Risk Uncert. Eng. Syst. A. Civil Eng., 5(2), 020910. https://doi.org/10.1115/1.4042973.
DOI
|
33 |
Mori, Y. and Nonaka, M. (2001), "LRFD for assessment of deteriorating existing structures", Struct. Saf., 23(4), 297-313. https://doi.org/10.1016/S0167-4730(02)00014-0.
DOI
|
34 |
Liao, K.W. and Gautama, I. (2014), "A single loop reliability-based design optimization using EPM and MPP- based PSO", Lat. Am. J. Solid. Struct., 11(5), 826-847. https://doi.org/10.1590/S1679-78252014000500006.
DOI
|
35 |
Lu, Z.H., Zhao, Y.G. and Ang, A.H.S. (2010), "Estimation of load and resistance factors based on the fourth moment method", Struct. Eng. Mech., 36(1), 19-36. https://doi.org/10.12989/sem.2010.36.1.019.
DOI
|
36 |
Milford, R.V. (1987), "Load factors for limit states codes", J. Struct. Eng., 113, 2053-2057. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:9(2053).
DOI
|
37 |
NBCC (2010), National Building Code of Canada, National Research Council of Canada, Ottawa, Canada.
|
38 |
Phoon, K.K., Kulhawy, F.H. and Grigoriu, M.D. (2003), "Multiple resistance factor design (MRFD) for shallow transmission line structure foundations", J. Geotech. Geoenviron. Eng., 129(9), 807-818. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:9(807).
DOI
|
39 |
Zhao, Y.G., Lu, Z.H. and Lin, Y.S. (2008), "Determination of load and resistance factors by method of moments", J. Struct. Constr. Eng., 73(625), 383-389. https://doi.org/10.3130/aijs.73.383.
DOI
|
40 |
Zhao, W.T., Shi, X.Y. and Tang, K. (2017), "Reliability-based design optimization using reliability mapping functions", Struct. Eng. Mech., 62(2), 125-138. https://doi.org/10.12989/sem.2017.62.2.125.
DOI
|
41 |
Waseem, M. and Spacone, E. (2017), "Fragility curves for the typical multi-span simply supported bridges in northern Pakistan", Struct. Eng. Mech., 64(2), 213-223. https://doi.org/10.12989/sem.2017.64.2.213.
DOI
|
42 |
Shinozuka, M. (1983), "Basic analysis of structural safety", J. Struct. Eng., 109(3), 721-740. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:3(721).
DOI
|