Browse > Article
http://dx.doi.org/10.12989/sem.2021.80.1.091

Effects of halloysite nanotube, nano-silica and micro-silica on rheology, hardened properties and fracture energy of SCLC  

Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
Pourhaji, Pardis (Department of Civil Engineering, Iran University of Science and Technology)
Afzali-Naniz, Oveys (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
Publication Information
Structural Engineering and Mechanics / v.80, no.1, 2021 , pp. 91-101 More about this Journal
Abstract
In this paper, the effects of different replacement levels of halloysite nanotube (HNT), colloidal nano-silica (CS), micro-silica (MS), and the combination of them on the fresh and hardened properties of self-compacting lightweight concrete (SCLC) are studied. Four factors including water to binder ratio (w/b) with two levels of 0.35 and 0.45, CS with three replacement levels of 1, 3 and 5%, MS with the replacement level of 10% and HNT with three replacement levels of 1, 2 and 3% were chosen. The fresh properties of SCLCs were observed in terms of slump flow diameter and time, J-ring diameter, V-funnel time and U-box tests. The hardened properties were determined through mechanical properties including compressive strength, tensile strength, modulus of elasticity and flexural strength. The non-destructive tests including electrical resistivity and water absorption were executed too. Moreover, the effects of MS, CS and HNT contents on the fracture energy of SCLC samples were studied. The results displayed that the mentioned properties for the SCLC specimens containing MS, CS and HNT improved, but the superior performance was obtained in binary mixes, which were created by adding both MS and CS simultaneously. The optimal conditions for having the best results were obtained when the amounts of MS and CS were 10% and 3%, respectively.
Keywords
colloidal nano-silica; micro-silica; halloysite nanotube; self-compacting lightweight concrete;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Petersson, P.E. (1980), "Fracture energy of concrete: practical performance and experimental results", Cement Concrete Res., 10, 91-101. https://doi.org/10.1016/0008-8846(80)90055-1.   DOI
2 Puentes, J., Barluenga, G. and Palomar, I. (2015), "Effect of silica-based nano and micro additions on SCC at early age and on hardened porosity and permeability", Constr. Build. Mater., 81, 154-161. https://doi.org/10.1016/j.conbuildmat.2015.02.053.   DOI
3 Sadeghi Nik, A. and Lotfi Omran, O. (2013), "Estimation of compressive strength of self-compacted concrete with fibers consisting nano-SiO2 using ultrasonic pulse velocity", Constr. Build. Mater., 44, 654-662. https://doi.org/10.1016/j.conbuildmat.2013.03.082.   DOI
4 Said, A.M., Zeidan, M.S., Bassuoni, M.T. and Tian, Y. (2012), "Properties of concrete incorporating nano-silica", Constr. Build., 36, 838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044.   DOI
5 Salehi, H. and Mazloom, M. (2018a), "Effect of magnetic-field intensity on fracture behaviors of self-compacting lightweight concrete", Mag. Concrete Res., 71(13), 1-45. https://doi.org/10.1680/jmacr.17.00418.   DOI
6 Salehi, H. and Mazloom, M. (2019a), "Opposite effects of ground granulated blast-furnace slag and silica fume on the fracture behavior of self-compacting lightweight concrete", Constr. Build. Mater. 222, 622-632. https://doi.org/10.1016/j.conbuildmat.2019.06.183.   DOI
7 Salehi, H. and Mazloom, M. (2019b), "An experimental investigation on fracture parameters and brittleness of self-compacting lightweight concrete containing magnetic field treated water", Arch. Civil Mech. Eng., 19, 803-819. https://doi.org/10.1016/j.acme.2018.10.008.   DOI
8 Scrivener, K.L., Crumbie, A.K. and Laugesen, P. (2004), "The interfacial transition zone (ITZ) between cement paste and aggregate in concrete", Interf. Sci., 12(4), 411-421. https://doi.org/10.1023/B:INTS.0000042339.92990.4c.   DOI
9 ASTM C 293 (2002), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading), ASTM International, West Conshohocken, PA, USA.
10 ASTM C642-97 (2006), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete ASTM International, West Conshohocken, PA, USA.
11 Beygi, M.H.A., Kazemi, M.T., Amiri, J.V., Nikbin, I.M., Rabbanifar, S. and Rahmani, E. (2014a), "Evaluation of the effect of maximum aggregate size on fracture behavior of selfcompacting concrete", Constr. Build. Mater., 55, 202-211. https://doi.org/10.1016/j.conbuildmat.2014.01.065.   DOI
12 BS EN 12390-5 (2019), Testing Hardened Concrete, Flexural Strength of Test Specimens, British Standards Institute, London, UK.
13 Dolatabdi, Y., Abolpour, B. and Tazangi, M. (2021), "Investigating effects of Nano-particles of silica on the properties of self-compacting concrete containing perlite, leca and scoria light weight aggregates", Arab. J. Geosci., 14(10), 1-13. https://doi.org/10.1007/s12517-021-07233-w.   DOI
14 Mazloom, M., Mehrvand, M., Pourhaji, P. and Savaripour, A. (2019), "Studying the effects of CFRP and GFRP sheets on strengthening of self-compacting RC girders", Struct. Monit. Mainten., 6(1), 47-66. https://doi.org/10.12989/smm.2019.6.1.047.   DOI
15 Duan, P., Shui, Z., Chen, W. and Chen, C. (2013), "Efficiency of mineral admixtures in concrete: microstructure, compressive strength and stability of hydrate phases", Appl. Clay Sci., 83-84, 115-121. https://doi.org/10.1016/j.clay.2013.08.021.   DOI
16 Farzadnia, N., Abang Ali, A., Dermirboga, R. and Parvez Anwar, M. (2013), "Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars", Cement Concrete Res., 48, 97-104. https://doi.org/10.1016/j.cemconres.2013.03.005.   DOI
17 Mazloom, M., Homayooni, S.M. and Miri, S.M. (2018a), "Effect of rock flour type on rheology and strength of self-compacting lightweight concrete", Comput. Concrete, 21(2), 199-207. https://doi.org/10.12989/cac.2018.21.2.199.   DOI
18 Mazloom, M., Pourhaji, P., Shahveisi, M. and Jafari, S.H. (2019), "Studying the Park-Ang damage index of reinforced concrete structures based on equivalent sinusoidal waves", Struct. Eng. Mech., 72(1), 83-97. https://doi: 10.12989/sem.2019.72.1.083.   DOI
19 Mazloom, M., Saffari, A. and Mehrvand, M. (2015), "Compressive, shear and torsional strength of beams made of self-compacting concrete", Comput. Concrete, 15(6), 935-950. https://doi.org/10.12989/cac.2015.15.6.935.   DOI
20 Medher, A., Al-Haditi, A. and Hilal, N. (2021), "The possibility of producing Self-Compacting lightweight concrete by using expanded polystryrene beads as coarse aggregate", Arab. J. Sci. Eng., 46, 4523-4270. https://doi.org/10.1007/s13369-020-04886-9.   DOI
21 Xu, J., Wang, B. and Zuo, J. (2017), "Modification effects of nanosilica on the interfacial transition zone in concrete: A multiscale approach", Cement Concrete Compos., 81, 1-10. https://doi.org/10.1016/j.cemconcomp.2017.04.003.   DOI
22 Singh, L.P., Karade, S.R., Bhattacharyya, S.K., Yousuf, M.M. and Ahalawat, S. (2013), "Beneficial role of nanosilica in cement based materials-a review", Constr. Build. Mater., 47, 1069-1077. https://doi.org/10.1016/j.conbuildmat.2013.05.052.   DOI
23 Sun, B., Xiao, R., Ruan, W. and Wang, P. (2020), "Corrosion-induced cracking fragility of RC bridge with improved concrete carbonation and steel reinforcement corrosion models", Eng. Struct., 208, 110313. https://doi.org/10.1016/j.engstruct.2020.110313.   DOI
24 Wu, Z., Zhang, Y., Zheng, J. and Ding, Y. (2009), "An experimental study on the workability of self-compacting lightweight concrete", Constr. Build. Mater., 23(5), 2087-2092. https://doi.org/10.1016/j.conbuildmat.2008.08.023.   DOI
25 Zhang, M. and Islam, J. (2012a), "Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag", Constr. Build. Mater., 29, 573-580. https://doi.org/10.1016/j.conbuildmat.2011.11.013.   DOI
26 Hosseini, P., Booshehrian, A. and Farschi, S. (2010), "Influence of nano-SiO2 addition on microstructure and mechanical properties of cement mortars for ferrocement", Transp. Res. Record, 2141, 15-20. https://doi.org/10.3141/2141-04.   DOI
27 Etli, S., Cemalgil, S. and Onat, O. (2021), "Effect of pumice powder and artificial lightweight fine aggregate on selfcompacting mortar", Comput. Concrete, 27(3), 241-252. https://doi.org/10.12989/cac.2021.27.3.241.   DOI
28 Felekoglu, B.S. and Turkel, B.B. (2007), "Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete", Build. Environ., 42(4), 1795-1802. https://doi.org/10.1016/j.buildenv.2006.01.012.   DOI
29 Guneyisi, E., Gesoglu, M., Azez, O.A. and Oznur, H.O. (2016), "Effect of nano silica on the workability of self-compacting concretes having untreated and surface treated lightweight aggregates", Constr. Build. Mater., 115, 371-380. https://doi.org/10.1016/j.conbuildmat.2016.04.055.   DOI
30 Mazloom, M., Pourhaji, P., Shahveisi, M. and Jafari, S.H. (2019), "Studying the Park-Ang damage index of reinforced concrete structures based on equivalent sinusoidal waves", Struct. Eng. Mater., 72(1), 83-97. https://doi.org/10.12989/sem.2019.72.1.083.   DOI
31 Mazloom, M., Soltani, A., Karamloo, M., Hasanloo, A. and Ranjbar, A. (2018b), "Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete", Adv. Mater. Res., 7(1), 407-434. http://doi.org/10.12989/amr.2018.7.1.045.   DOI
32 Angelin, A., Lintz R., Osorio, W. and Gachet, L. (2020), "Evaluation of efficiency factor of a self-compacting lightweight concrete with rubber and expanded clay contents", Constr. Build. Mater., 257, 119573. https://doi.org/10.1016/j.conbuildmat.2020.119573.   DOI
33 Karamloo, M., Mazloom, M. and Payganeh, G. (2016b), "Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete", Constr. Build. Mater., 123, 508-515. https://doi.org/10.1016/j.conbuildmat.2016.07.061.   DOI
34 Ghasemi, M., Ghasemi, M.R. and Mousavi, S.R. (2018), "Investigating the effects of maximum aggregate size on self-compacting steel fiber reinforced concrete fracture parameters", Constr. Build. Mater., 162, 674-682. https://doi.org/10.1016/j.conbuildmat.2017.11.141.   DOI
35 Nazari, A. and Riahi, S. (2010), "Microstructural, thermal, physical and mechanical behavior of the self-compacting concrete containing SiO2 nanoparticles", Mater. Sci. Eng.: A, 527, 7663-7672. https://doi.org/10.1016/j.msea.2010.08.095.   DOI
36 Nikbin, I.M., Davoodi, M.R., Fallahnejad, H. and Rahimi, S. (2016), "Influence of mineral powder content on the fracture behaviors and ductility of self-compacting concrete", J. Mater. Civil Eng., 28(3), 1-14. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001404.   DOI
37 Nili, M. and Ehsani, A. (2015), "Investigating the effect of the cement paste and transition zone on strength development of concrete containing nano silica and silica fume", Mater. Des., 75, 174-183. https://doi.org/10.1016/j.matdes.2015.03.024.   DOI
38 Hosseinpourpia, R., Varshoee, A., Soltani, M., Hosseini, P. and Ziaei Tabari, H. (2012), "Production of waste bio-fiber cement-based composites reinforced with nano-SiO2 particles as a substitute for asbestos cement composites", Constr. Build. Mater., 31, 105-111. https://doi.org/10.1016/j.conbuildmat.2011.12.102.   DOI
39 Karamloo, M. and Mazloom, M. (2018), "An efficient algorithm for scaling problem of notched beam specimens with various notch to depth ratios", Comput. Concrete, 22(1), 39-51. https://doi.org/10.12989/cac.2018.22.1.039.   DOI
40 Karamloo, M., Mazloom, M. and Payganeh, G. (2016a), "Influences of water to cement ratio on brittleness and fracture parameters of self-compacting lightweight concrete", Eng. Fract. Mech., 168, 227-241. https://doi.org/10.1016/j.engfracmech.2016.09.011.   DOI
41 Klug, Y. and Holschemacher, K. (2003), "Comparison of the hardened properties of self-compacting and normal vibrated concrete", The third International RILEM Symposium on Self-Compacting Concrete, Reykjavik, August.
42 Kong, D., Su, Y., Du, X., Yang, Y., Wei, S. and Shah, S.P. (2013), "Influence of nano-silica agglomeration on fresh properties of cement pastes", Constr. Build. Mater., 43, 557-562. https://doi.org/10.1016/j.conbuildmat.2013.02.066.   DOI
43 Korte, S., Boel, V., De-Corte, W. and De Schutter, G. (2014), "Static and fatigue fracture mechanics properties of self-compacting concrete using three-point bending tests and wedge-splitting tests", Constr. Build. Mater., 57, 1-8. https://doi.org/10.1016/j.conbuildmat.2014.01.090.   DOI
44 Mazloom, M. and Hatami, H. (2015), "The behavior of self-compacting light weight concrete produced by magnetic water", Civil Environ. Eng., 9(12), 1616-162. https://doi.org/10.5281/zenodo.1125669.   DOI
45 Li, H., Xiao, H., Yuan, J. and Ou, J. (2004), "Microstructure of cement mortar with nano-particles", Compos. Part B: Eng., 35,185-189. https://doi.org/10.1016/S1359-8368(03)00052-0.   DOI
46 Li, L.G., Huang, Z.H., Zhu, J., Kwan, A.K.H. and Chen, H.Y. (2017), "Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar", Constr. Build. Mater., 140, 229-238. https://doi.org/10.1016/j.conbuildmat.2017.02.115.   DOI
47 Madandoust, M. and Mousavi, S.Y. (2012), "Fresh and hardened properties of self-compacting concrete containing metakaolin", Constr. Build. Mater., 35, 752-760. https://doi.org/10.1016/j.conbuildmat.2012.04.109.   DOI
48 Mazloom, M. and Mahboubi, F. (2017), "Evaluating the settlement of lightweight coarse aggregate in self-compacting lightweight concrete", Comput. Concrete, 19(2), 203-210. https://doi.org/10.12989/cac.2017.19.2.203.   DOI
49 Mazloom, M. and Miri, M.S. (2017), "Interaction of magnetic water, silica fume and superplasticizer on fresh and hardened properties of concrete", Adv. Concrete Constr., 5(2), 87-99. https://doi.org/10.12989/acc.2017.5.2.087.   DOI
50 Mazloom, M. and Yoosefi, M.M. (2013), "Predicting the indirect tensile strength of self-compacting concrete using artificial neural networks", Comput. Concrete, 12(3), 285-301. https://doi.org/10.12989/cac.2013.12.3.285.   DOI
51 Afzali-Naniz, O. and Mazloom, M. (2018), "Effects of colloidal nano-silica on fresh and hardened properties of self-compacting lightweight concrete", J. Build. Eng., 20, 400-410. https://doi.org/10.1016/j.jobe.2018.08.014.   DOI
52 Mazloom, M., Allahabadi, A. and Karamloo, M. (2017), "Effect of silica fume and polyepoxide-based polymer on electrical resistivity, mechanical properties, and ultrasonic response of SCLC", Adv. Concrete Constr., 5(6), 587-611. https://doi.org/10.12989/acc.2017.5.6.587.   DOI
53 ASTM C1585-04 (2004), Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, Astm International, West Conshohocken, PA, USA.
54 Afzali-Naniz O. and Mazloom M. (2019a), "Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design", Asia. J. Civil Eng., 20(1), 57-70. https://doi.org/10.1007/s42107-018-0088-2.   DOI
55 Afzali-Naniz, O. and Mazloom, M. (2019b), "Fracture behavior of self-compacting semi-lightweight concrete containing nanosilica", Adv. Struct. Eng., 22(10), 2264-2277. https://doi.org/10.1177/1369433219837426   DOI
56 Akcxaouglu, T., Tokyay, M. and Cxelik, T. (2004), "Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression", Cement Concrete Compos., 26(6), 633-638. https://doi.org/10.1016/S0958-9465(03)00092-1.   DOI
57 Al-Khaiat, H. and Hague M.N. (1998), "Effect of initial curing on early strength and physical properties of lightweight concrete", Cement Concrete Res., 28, 859-866. https://doi.org/10.1016/S0008-8846(98)00051-9.   DOI
58 Li, J., Zhao, E., Niu, J. and Wan, Ch. (2021), "Study on mixture design method and mechanical properties of steel fiber reinforced self-compacting lightweight aggregate", Constr. Build. Mater., 267, 121019. https://doi.org/10.1016/j.conbuildmat.2020.121019   DOI
59 ASTM C 1611/C 1611M-05 (2005), Standard Test Method for Slump Flow of Self-Consolidating Concrete, ASTM International, West Conshohocken, PA, USA.
60 Karamloo, M., Mazloom, M. and Payganeh, G. (2017), "Effect of size on nominal strength of self-compacting lightweight concrete and self-compacting normal weight concrete: a stress-based approach", Mater. Today Commun., 13, 36-45. https://doi.org/10.1016/j.mtcomm.2017.08.002.   DOI
61 ASTM C469/C469M (2010), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM International, West Conshohocken, PA, USA.
62 Bahadori, H. and Hosseini, P. (2012), "Reduction of cement consumption by the aid of silica nano-particles (investigation on concrete properties)", J. Civil Eng. Manage., 18(3), 416-425. https://doi.org/10.3846/13923730.2012.698912.   DOI
63 Beygi, M.H., Kazemi, M.T., Nikbin, I.M. and Amiri, J.V. (2014b), "The effect of aging on the fracture characteristics and ductility of self-compacting concrete", Mater. Des., 55, 937-948. https://doi.org/10.1016/j.matdes.2013.10.066.   DOI
64 Beygi, M.H.A., Nikbin, I.M. and Amiri, J.V. (2013), "The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete", Mater. Des., 50, 267-276. https://doi.org/10.1016/j.matdes.2013.02.018.   DOI
65 BS EN 12390-4 (2000), Testing Hardened Concrete, Method of Determination of Compressive Strength of Concrete Cubes, British Standards Institute, London, UK.
66 Shah, S.P. (1990), "Size-effect method for determining fracture energy and process zone size of concrete", Mater. Struct., 23(6), 461-465.   DOI
67 BS EN 12390-6 (2000), Testing Hardened Concrete, Tensile Splitting Strength of Test Specimens, British Standards Institute, London, UK.
68 Carpinteri, A and Brighenti, R (2010), "Fracture behaviour of plain and fiber-reinforced concrete with different water content under mixed mode loading", Mater. Des., 31, 2032-2042. https://doi.org/10.1016/j.matdes.2009.10.021.   DOI
69 ASTM C 1621/C 1621M (2017), Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring, ASTM International, West Conshohocken, PA, USA.
70 Salehi, H. and Mazloom, M. (2018b), "Experimental and numerical studies of crack propagation in self-compacting lightweight concrete", Modares Mech. Eng., 18(6), 144-155.
71 Zhang, M.H., Islam, J. and Peethamparan, S. (2012b), "Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag", Cement Concrete Compos., 34(5), 650-662. https://doi.org/10.1016/j.cemconcomp.2012.02.005.   DOI
72 European Federation for Specialist Construction Chemicals and Concrete Systems (EFNARC) (2002), Specification and guidelines for self-compacting concrete, European Federation for Specialist Construction Chemicals and Concrete Systems, Norfolk, UK.
73 ASTM C597-09 (2009), Standard Test Method for Pulse Velocity Through Concrete, ASTM International, West Conshohocken, PA, USA.
74 ASTM C1876-19 (2019), Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete, ASTM International, West Conshohocken, PA, USA.
75 Okamura, H. and Ozawa, K. (1996), "Self-compactable high-performance concrete in Japan", International Workshop on High Performance Concrete, Bangkok, November.
76 Doostmohamadi, A., Karamloo, M. and Afzali-Naniz, O. (2020), "Effect of polyolefin macro fibers and handmade GFRP anchorage system on improving the bonding behavior of GFRP bars embedded in self-compacting lightweight concrete", Constr. Build. Mater., 253, 119230. https://doi.org/10.1016/j.conbuildmat.2020.119230.   DOI