1 |
Keyvani, S. and Hoseini Vaez, S.R. (2019), "Using DLO procedure to investigate the effect of openings on ultimate load and collapse pattern of slabs", Struct., 20, 717-727. https://doi.org/10.1016/j.istruc.2019.06.023.
DOI
|
2 |
Harash, M.A. and Panahshahi, N. (2012). "Inelastic seismic response of reinforced concrete buildings with symmetric and unsymmetric floor diaphragm openings", Proceedings of the Fifthteenth World Conference on Earthquake Engineering, Lisbon, Portugal.
|
3 |
Hegger, J., Dressen, T., Niewels, J. and Will, N. (2009), "Static system of plain concrete basement walls under earth pressure", Mag. Concrete Res., 61(10), 815-821. https://doi.org/10.1680/macr.2008.61.10.815.
DOI
|
4 |
Khajehdehi, R. and Panahshahi, N. (2016), "Effect of openings on in-plane structural behavior of reinforced concrete floor slabs", J. Build. Eng., 7, 1-11. https://doi.org/10.1016/j.jobe.2016.04.011.
DOI
|
5 |
Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
DOI
|
6 |
Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 067-085. http://doi.org/10.12989/scs.2017.23.1.067.
DOI
|
7 |
ACI 318-14 (2014), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan.
|
8 |
Anajafi, H. and Medina, R.A. (2019), "Lessons learned from evaluating the responses of instrumented buildings in the united states: The effects of supporting building characteristics on floor response spectra", Earthq. Spectra, 35(1), 159-191. https://doi.org/10.1193/081017EQS159M.
DOI
|
9 |
ANSYS (2019), User's Manual Version 19.0, ANSYS, Inc, Pennsylvania.
|
10 |
Brooks, H. and Nielsen, J.P. (2018), Basics of Retaining Wall Design, HBA Publication, Newport Beach, California.
|
11 |
Chong, X., Xie, L., Ye, X., Jiang, Q. and Wang, D. (2020), "Experimental investigation on the mechanical behaviour of a new superimposed RC exterior basement wall with socket base", Eur. J. Environ. Civil, 24(9), 1381-1397. https://doi.org/10.1080/19648189.2018.1471008.
DOI
|
12 |
Darwin, D., Dolan, C.W. and Nilson, A.H. (2016), Design of Concrete Structures, McGraw-Hill Education, New York.
|
13 |
Duncan, C.I. (2012), Soils and Foundations for Architects and Engineers, Springer Science & Business Media, New York.
|
14 |
Mahlis, M., Shoeib, A.E., Abd Elnaby, S. and Sherif, A. (2018), "The effect of cutting openings on the behavior of two-way solid loaded slabs", Struct., 16, 137-149. https://doi.org/10.1016/j.istruc.2018.09.002.
DOI
|
15 |
Lee, E.H., Luo, C., Sam, Y.L., Roberts, A.C., Kwok, K.W., Car, J., Soh, C.K. and Christopoulos, G.I. (2019), "The underground workspaces questionnaire (UWSQ): Investigating public attitudes toward working in underground spaces", Build. Environ., 153, 28-34. https://doi.org/10.1016/j.buildenv.2019.02.017.
DOI
|
16 |
Liberati, E.A.P., Marques, M.G., Leonel, E.D., Almeida, L.C. and Trautwein, L.M. (2019), "Failure analysis of punching in reinforced concrete flat slabs with openings adjacent to the column", Eng. Struct., 182, 331-343. https://doi.org/10.1016/j.engstruct.2018.11.073.
DOI
|
17 |
Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. https://doi.org/10.12989/scs.2019.30.3.271.
DOI
|
18 |
Nelson, P.P. (2016), "A framework for the future of urban underground engineering", Tunn. Undergr. Space Technol., 55, 32-39. https://doi.org/10.1016/j.tust.2015.10.023.
DOI
|
19 |
ASCE/SEI 7-16 (2017), Minimum Design Loads and Associated Criteria for Buildings and other Structures, American Society of Civil Engineers, Reston, Virginia.
|
20 |
Durucan, C. and Anil, O. (2015), "Effect of opening size and location on the punching shear behavior of interior slab-column connections strengthened with CFRP strips", Eng. Struct., 105, 22-36. https://doi.org/10.1016/j.engstruct.2015.09.033.
DOI
|
21 |
Erler, M., Jager, W. and Kranzler, T. (2017), "Basement wall under earth pressure loading with low surcharge", Mauerwerk, 21(2), 61-81. https://doi.org/10.1002/dama.201700723.
DOI
|
22 |
Ju, S.H. and Lin, M.C. (1999), "Comparison of building analyses assuming rigid or flexible floors", J. Struct. Eng., 125(1), 25-31. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(25).
DOI
|
23 |
Peng, W., Tang, Z., Wang, D., Cao, X., Dai, F. and Taciroglu, E. (2020), "A forensic investigation of the Xiaoshan ramp bridge collapse", Eng. Struct., 224, 111203. https://doi.org/10.1016/j.engstruct.2020.111203.
DOI
|
24 |
Pecce, M.R., Ceroni, F. and Maddaloni, G. (2019), "In-plane deformability of RC floors: Assessment of the main parameters and influence on dynamic behaviour", Bull. Earthq. Eng., 17(1), 297-311. https://doi.org/10.1007/s10518-018-0432-7.
DOI
|
25 |
Nie, J.G., Wang, Y.H. and Cai, C.S. (2012), "Elastic rigidity of composite beams with full width slab openings", J. Constr. Steel Res., 73, 43-54. https://doi.org/10.1016/j.jcsr.2012.01.008.
DOI
|
26 |
Al-Balhawi, A. and Zhang, B. (2019), "Investigations of elastic vibration periods of tall reinforced concrete office buildings", Wind Struct., 29(3), 209-223. https://doi.org/10.12989/was.2019.29.3.209.
DOI
|
27 |
Khaloo, A.R., Masoomi, H., Nozhati, S. and Mohamadi Dehcheshmeh, M. (2016), "Influence of diaphragm opening on seismic response of rectangular RC buildings with end shear walls", Sci. Iran, 23(4), 1689-1698. https://doi.org/10.24200/sci.2016.2239.
DOI
|
28 |
Mahmoud, K., Anand, P. and Ei-Salakawy, E. (2018), "3-D finite element modelling of prestressed hollow-core slabs strengthened with near surface mounted CFRP strips", Comput. Concrete, 21(6), 607-622. https://doi.org/10.12989/cac.2018.21.6.607.
DOI
|
29 |
Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639. https://doi.org/10.12989/sem.2019.70.5.639.
DOI
|
30 |
Afefy, H.M. and Fawzy, T.M. (2013), "Strengthening of RC one-way slabs including cut-out using different techniques", Eng. Struct., 57, 23-36. https://doi.org/10.1016/j.engstruct.2013.09.013.
DOI
|
31 |
Pytel, A. and Kiusalaas, J. (2012), Mechanics of Materials, Cengage Learning, Stamford, California.
|
32 |
Tena-Colunga, A. and Abrams, D.P. (1996), "Seismic behavior of structures with flexible diaphragms", J. Struct. Eng., 122(4), 439-445. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(439).
DOI
|
33 |
Reinhorn, A.M., Kunnath, S.K. and Panahshahi, N. (1988), Modeling of RC Building Structures with Flexible Floor Diaphragms, Buffalo, New York.
|
34 |
Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
DOI
|
35 |
Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. http://doi.org/10.12989/scs.2019.31.5.427.
DOI
|
36 |
Swamidurai, S. (2019), "Evaluation of people's willingness to use underground space using structural equation modeling-Case of Phoenix market city mall in Chennai city, India", Tunn. Undergr. Space Technol., 91, 103012. https://doi.org/10.1016/j.tust.2019.103012.
DOI
|
37 |
Taiebat, M., Amirzehni, E. and Finn, W.D.L. (2014), "Seismic design of basement walls: evaluation of current practice in British Columbia", Can. Geotech. J., 51(9), 1004-1020. https://doi.org/10.1139/cgj-2013-0212.
DOI
|
38 |
Tena-Colunga, A., Chinchilla-Portillo, K.L. and Juarez-Luna, G. (2015), "Assessment of the diaphragm condition for floor systems used in urban buildings", Eng. Struct., 93, 70-84. https://doi.org/10.1016/j.engstruct.2015.03.025.
DOI
|
39 |
ICC (2021), International Residential Code, International Code Council, Washington, DC.
|
40 |
Hwang, S.H. and Lignos, D.G. (2017), "Earthquake-induced loss assessment of steel frame buildings with special moment frames designed in highly seismic regions", Earthq. Eng. Struct. Dyn., 46(13), 2141-2162. https://doi.org/10.1002/eqe.2898.
DOI
|
41 |
Jalla, R. (1999), "Basement wall design: Geotechnical aspects", J. Archit. Eng., 5(3), 89-91.
DOI
|