Browse > Article
http://dx.doi.org/10.12989/sem.2021.77.2.197

Lifetime seismic performance assessment of high-rise steel-concrete composite frame with buckling-restrained braces under wind-induced fatigue  

Liu, Yang (State Lab. of Coastal and Offshore Engineering, Faculty of Infrastructure Engineering, Dalian University of Technology)
Li, Hong-Nan (State Lab. of Coastal and Offshore Engineering, Faculty of Infrastructure Engineering, Dalian University of Technology)
Li, Chao (State Lab. of Coastal and Offshore Engineering, Faculty of Infrastructure Engineering, Dalian University of Technology)
Dong, Tian-Ze (Department of Architecture and Civil Engineering, City University of Hong Kong)
Publication Information
Structural Engineering and Mechanics / v.77, no.2, 2021 , pp. 197-215 More about this Journal
Abstract
Under a severe environment of multiple hazards such as earthquakes and winds, the life-cycle performance of engineering structures may inevitably be deteriorated due to the fatigue effect caused by long-term exposure to wind loads, which would further increase the structural vulnerability to earthquakes. This paper presents a framework for evaluating the lifetime structural seismic performance under the effect of wind-induced fatigue considering different sources of uncertainties. The seismic behavior of a high-rise steel-concrete composite frame with buckling-restrained braces (FBRB) during its service life is systematically investigated using the proposed approach. Recorded field data for the wind hazard of Fuzhou, Fujian Province of China from Jan. 1, 1980 to Mar. 31, 2019 is collected, based on which the distribution of wind velocity is constructed by the Gumbel model after comparisons. The OpenSees platform is employed to establish the numerical model of the FBRB and conduct subsequent numerical computations. Allowed for the uncertainties caused by the wind generation and structural modeling, the final annual fatigue damage takes the average of 50 groups of simulations. The lifetime structural performance assessments, including static pushover analyses, nonlinear dynamic time history analyses and fragility analyses, are conducted on the time-dependent finite element (FE) models which are modified in lines with the material deterioration models. The results indicate that the structural performance tends to degrade over time under the effect of fatigue, while the influencing degree of fatigue varies with the duration time of fatigue process and seismic intensity. The impact of wind-induced fatigue on structural responses and fragilities are explicitly quantified and discussed in details.
Keywords
life-cycle seismic performance; wind-induced fatigue; steel-concrete composite frame structure; buckling-restrained braces; uncertainty;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Li, C., Hao, H., Li, H.N. and Bi, K.M. (2016), "Seismic fragility analysis of reinforced concrete bridges with chloride induced corrosion subjected to spatially varying ground motions", Int. J. Struct. Stability Dyn., 16(5), 1550010. https://doi.org/10.1142/S0219455415500108.   DOI
2 Li, C., Hao, H, Li, H.N., Bi, K.M. and Chen, B.K. (2017), "Modeling and simulation of spatially correlated ground motions at multiple onshore and offshore sites", J. Earthquake Eng., 21(3), 359-383. https://doi.org/10.1080/13632469.2016.1172375.   DOI
3 Li, C., Li, H.N., Hao, H, Bi, K.M. and Chen, B.K. (2018). "Seismic fragility analyses of sea-crossing cable-stayed bridges subjected to multi-support ground motions on offshore sites", Eng. Struct., 165, 441-456. https://doi.org/10.1016/j.engstruct.2018.03.066.   DOI
4 Li, L.X., Li, H.N. and Li, C. (2018). "Seismic fragility assessment of self-centering RC frame structures considering maximum and residual deformations", Struct. Eng. Mech., 68(6), 677-689. https://doi.org/10.12989/sem.2018.68.6.677.   DOI
5 Xu, Y.L., Liu, T.T. and Zhang, W.S. (2009), "Buffeting-induced fatigue damage assessment of a long suspension bridge", Int. J. Fatigue, 31, 575-586. https://doi.org/10.1016/j.ijfatigue.2008.03.031.   DOI
6 Yang, C., Yang, J.F., Su, M.Z. and Liu, C.Z. (2016), "Numerical study on seismic behaviours of ConXL biaxial moment connection", J. Constr. Steel Res., 121, 185-201. https://doi.org/10.1016/j.jcsr.2016.02.013.   DOI
7 Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical Stress‐Strain Model for Confined Concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).   DOI
8 Liew, J.Y.R. (2001). "State-of-the-art of advanced inelastic analysis of steel and composite structures", steel compos. struct., 1(3), 341-354. https://doi.org/10.12989/scs.2001.1.3.341   DOI
9 Liu, J.B., Liu, Y.B. and Liu, H. (2010), "Seismic fragility analysis of composite frame structure based on performance", Earthquake Sci., 23(1), 45-52. https://doi.org/10.1007/s11589-009-0049-7.   DOI
10 Ma, H., Li, S.Z., Li, Z., Liu, Y.H., Dong, J. and Zhang, P. (2018). "Shear behavior of composite frame inner joints of srrc column-steel beam subjected to cyclic loading", Steel Composite Struct. 27(4) https://doi.org/10.12989/scs.2018.27.4.495   DOI
11 Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002), "Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines", J. Struct. Eng., 128, 526-533. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526).   DOI
12 Chen, Z.W., Xu, Y.L., Xia, Y., Li, Q. and Wong, K.Y. (2011), "Fatigue analysis of long-span suspension bridges under multiple loading: Case study", Eng. Struct., 33, 3246-3256. https://doi.org/10.1016/j.engstruct.2011.08.027.   DOI
13 Civalek, O. (2009). "Fundamental frequency of isotropic and orthotropic rectangular plates with linearly varying thickness by discrete singular convolution method", Appl. Math. Modelling, 33(10), 3825-3835. https://doi.org/10.1016/j.apm.2008.12.019   DOI
14 Civalek, O. and Acar, M.H. (2007). "Discrete singular convolution method for the analysis of mindlin plates on elastic foundations", J. Press. Vessel Pip., 84(9), 527-535. https://doi.org/10.1016/j.ijpvp.2007.07.001   DOI
15 Alimirzaei, S., Mohammadimehr, M. and Tounsi, A. (2019), "Nonlinear analysis of viscoelastic micro-composite beam with geometrical imperfection using FEM: MSGT electro-magnetoelastic bending, buckling and vibration solutions", Struct. Eng. Mech., 71(5), 485-502. https://doi.org/10.12989/sem.2019.71.5.485.   DOI
16 AASHTO-LRFD (2004), Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C., USA.
17 Mwafy, A.M. and Elnashai, A.S. (2001), "Static pushover versus dynamic collapse analysis of RC buildings", Eng. Struct., 23, 407-424. https://doi.org/10.1016/S0141-0296(00)00068-7.   DOI
18 Aas-Jakobsen, K. and Lenschow, R. (1973), "Behavior of reinforced columns subjected to fatigue loading", ACI J., 70(3), 199-206.
19 Akgoz, B. and Civalek, O. (2011). "Nonlinear vibration analysis of laminated plates restingon nonlinear two-parameters elastic foundations", Steel Compos. Struct., 11(5), 403-421. https://doi.org/10.12989/scs.2011.11.5.403   DOI
20 Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2006), The open system for earthquake engineering simulation (OpenSEES) user command-language manual; Pacific Earthquake Engineering Research Center University of California, Berkeley; USA.
21 Nallasivam, K., Talukdar, S. and Dutta, A. (2008). "Fatigue life prediction of horizontally curved thin walled box girder steel bridges", Struct. Eng. Mech., 28(4), 387-410. https://doi.org/10.12989/sem.2008.28.4.387.   DOI
22 Prasad, G.G. and Swagata, B. (2013), "The impact of flood-induced scour on seismic fragility characteristics of bridges", J. Earthquake. Eng., 17(6), 803-828. https://doi.org/10.1080/13632469.2013.771593.   DOI
23 Nieslony, A. (2009), "Determination of fragments of multiaxial service loading strongly influencing the fatigue of machine components", Mech. Systems Signal Proc., 23, 2712-2721. https://doi.org/10.1016/j.ymssp.2009.05.010.   DOI
24 Pagnini, L. and Repetto, M.P. (2012), "The role of parameter uncertainties in the damage prediction of the alongwind-induced fatigue", J. Wind Eng. Ind. Aerodyn., 104, 227-238. https://doi.org/10.1016/j.jweia.2012.03.027.   DOI
25 Philippidis, T.P. and Passipoularidis, V.A. (2007), "Residual strength after fatigue in composites: Theory vs. experiment", Int. J. Fatigue., 29, 2104-2116. https://doi.org/10.1016/j.ijfatigue.2007.01.019.   DOI
26 Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
27 Frangopol, D.M. and Soliman, M. (2015). "Life-cycle of structural systems: recent achievements and future directions", Struct. Infrast. Eng. 1-20. https://doi.org/10.1080/15732479.2014.999794   DOI
28 Augusti, G. and Ciampoli, M. (2008), "Performance-Based Design in risk assessment and reduction", Prob. Eng. Mech., 23(4), 496-508. https://doi.org/10.1016/j.probengmech.2008.01.007.   DOI
29 Barbato, M., Gu, Q. and Conte, J.P. (2010), "Probabilistic pushover analysis of structural and soil-structure systems", J. Struct. Eng., 136(11), 1330-1341. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000231.   DOI
30 Ding, Y., Song, X. and Zhu, H.T. (2017), "Probabilistic progressive collapse analysis of steel-concrete composite floor systems", J. Constr. Steel Res., 129, 129-140. https://doi.org/10.1016/j.jcsr.2016.11.009.   DOI
31 Gardoni, P., Bracci, J.M. and Ramamoorthy, S.K. (2006), "Probabilistic Demand Models and Fragility Curves for Reinforced Concrete Frames", J. Struct. Eng., 132(10), 1563-1572. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:10(1563).   DOI
32 Ghosh, J. and Padgett, J.E. (2010), "Aging considerations in the development of time-dependent seismic fragility curves", J. Struct. Eng., 136, 1497-1511. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000260.   DOI
33 GB 50009 (2012), Load Code for The Design of Building Structures, National Standards of the People's Republic of China. China Architecture and Building Press, Beijing, China.
34 GB 50011 (2010), Code for Seismic Design of Buildings, National Standards of the People's Republic of China. China Architecture and Building Press, Beijing, China.
35 GB 50017 (2012), Code for Design of Steel Structure, National Standards of the People's Republic of China. China Planning Press, Beijing, China.
36 Repetto, M.P. and Torrielli, A. (2017), "Long term simulation of wind-induced fatigue loadings", Eng. Struct., 132, 551-561. https://doi.org/10.1016/j.engstruct.2016.11.057.   DOI
37 Repetto, M.P. and Solari G. (2007), "Wind-induced fatigue of structures under neutral and non-neutral atmospheric conditions", J. Wind Eng. Ind. Aerodyn., 95, 1364-1383. https://doi.org/10.1016/j.jweia.2007.02.012.   DOI
38 Repetto, M.P. and Solari G. (2009), "Closed form solution of the alongwind-induced fatigue damage to structures", Eng. Struct., 31, 2414-2425. https://doi.org/10.1016/j.engstruct.2009.05.016.   DOI
39 Repetto, M.P. and Solari, G. (2010), "Wind-induced fatigue collapse of real slender structures", Eng. Struct., 32, 3888-3898. https://doi.org/10.1016/j.engstruct.2010.09.002.   DOI
40 Ronold, K.O., Wedel-Heinen, J. and Christensen, C.J. (1999), "Reliability-based fatigue design of wind-turbine rotor blades", Eng. Struct., 21, 1101-1114. https://doi.org/10.1016/S0141-0296(98)00048-0.   DOI
41 Saffarini, H.S. and Qudaimat, M.M. (1992). "In-plane floor deformations in RC structures", J. Struct. Eng. 118(11), 3089-3102. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(3089).   DOI
42 Sanchez-Silva, M., Klutke, G.A. and Rosowsky, D.V. (2011). "Life-cycle performance of structures subject to multiple deterioration mechanisms", Struct. Saf. 33(3), 206-217. https://doi.org/10.1016/j.strusafe.2011.03.003   DOI
43 Shen, Z. and Dong, B. (1997), "An experiment-based cumulative damage mechanics model of steel under cyclic loading", Advances Struct. Eng., 1, 39-46. https://doi.org/10.1177/136943329700100105.   DOI
44 Hobbacher, A. (2009), Recommendations for Fatigue Design of Welded Joints and Components, Welding Research Council, New York, NY, USA.
45 Shome, N. and Cornell, C.A. (1999), "Probabilistic seismic demand analysis of nonlinear structures", Report No. RMS-35, Dept. of Civil and Envirnomental Engineering; Stanford University, Stanford, California.
46 Goodman, J. (1930), Mechanics Applied to Engineering, Longmans Green, London, London, United Kingdom.
47 Gu, Q., Zona, A., Peng, Y. and Dall'Asta, A. (2014), "Effect of buckling-restrained brace model parameters on seismic structural response", J. Constr. Steel Res., 98(7), 100-113. https://doi.org/10.1016/j.jcsr.2014.02.009.   DOI
48 Hamilton, III. H.R., Riggs, G.S. and Puckett, J.A. (2000), "Increased damping in cantilevered traffic signal structures", J Struct. Eng., 126, 530-537. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(530).   DOI
49 Han, L.H., Yao, G.H. and Tao, Z. (2007), "Performance of concrete-filled thin-walled steel tubes under pure torsion", Thin-Walled Struct., 45, 24-36. https://doi.org/10.1016/j.tws.2007.01.008.   DOI
50 Hao, X.Y., Li, H.N., Li, G. and Makino, T. (2013), "Experimental investigation of steel structure with innovative H-type steel unbuckling braces", Struct. Design Tall Spec. Build., 23(14), 1064-1082. https://doi.org/10.1002/tal.1108.   DOI
51 Holmen, J.O. (1982), "Fatigue of concrete by constant and variable amplitude loading", ACI Spec. Publ., 75, 71-110.
52 Huang, G.Q., Liao, H.L. and Li, M.S. (2013), "New formulation of Cholesky decomposition and applications in stochastic simulation", Prob. Eng. Mech., 34(4), 40-47. https://doi.org/10.1016/j.probengmech.2013.04.003.   DOI
53 IEC61400-1 (2005), Wind Turbines - Part 1: Design Requirements, International Electrotechnical Commission (IEC), Ed. 3.
54 Isojeh, B. (2017), "Fatigue Damage Analysis of Reinforced Concrete Structural Elements", Ph.D. Dissertation, University of Toronto, Toronto.
55 Tarar, W., Herman Shen, M. H., George, T. and Cross, C. (2010). "A new finite element procedure for fatigue life prediction of AL6061 plates under multiaxial loadings", Struct. Eng. Mech., 35(5), 571-592. https://doi.org/10.12989/sem.2010.35.5.571.   DOI
56 Stein, M. (1987), "Large sample properties of simulations using Latin hypercube sampling", Technometrics, 29(2), 143-151. https://doi.org/10.1080/00401706.1987.10488205.   DOI
57 Sunderland, K.M., Mills, G. and Conlon, M.F. (2013), "Estimating the wind resource in an urban area: A case study of micro-wind generation potential in Dublin, Ireland", J. Wind Eng. Ind. Aerodyn., 118(7), 44-53. https://doi.org/10.1016/j.jweia.2013.04.002.   DOI
58 Sung, Y.C. and Su, C.K. (2011), "Time-dependent seismic fragility curves on optimal retrofitting of neutralised reinforced concrete bridges", Struct. Infrastruct. Eng., 7, 797-805. https://doi.org/10.1080/15732470902989720.   DOI
59 Tepfers, R. and Kutti, T. (1979), "Fatigue strength of plain, ordinary, and lightweight concrete", ACI J., 76(5), 635-652.
60 Torrenti, J.M., Pijaudier-Cabot, G. and Reynouard, J. (2010), Mechanical Behaviour of Concrete, John Wiley and Sons, New York, NY, USA.
61 Unobe, I.D. and Sorensen, A.D. (2015), "Multi-hazard analysis of a wind turbine concrete foundation under wind fatigue and seismic loadings", Struct. Saf., 57, 26-34. https://doi.org/10.1016/j.strusafe.2015.07.003.   DOI
62 Wang, J. F. and Li, G. Q. (2007). "Stability analysis of semi-rigid composite frames", Steel Compos. Struct., 7(2), 119-133. https://doi.org/10.12989/scs.2007.7.2.119   DOI
63 Caracoglia, L. (2014), "A stochastic model for examining along-wind loading uncertainty and intervention costs due to wind-induced damage on tall buildings", Eng. Struct., 78, 121-132. https://doi.org/10.1016/j.engstruct.2014.07.023.   DOI
64 Xu, Y.L. (1997), "Fatigue damage estimation of metal roof cladding subject to wind loading", J. Wind Eng. Ind. Aerodyn., 72, 379-388. https://doi.org/10.1016/S0167-6105(97)00254-7.   DOI
65 Bastidas-Arteaga, E., Bressolette, P., Chateauneuf, A. and Sánchez-Silva, M. (2009), "Probabilistic lifetime assessment of RC structures under coupled corrosion-fatigue deterioration processes", Struct. Saf., 31, 84-96. https://doi.org/10.1016/j.strusafe.2008.04.001.   DOI
66 Bigaud, D. and Ali, O. (2014), "Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions", Reliability Eng. System Saf., 131, 257-270. https://doi.org/10.1016/j.ress.2014.04.016.   DOI
67 Biondini, F. and Frangopol, D.M. (2016),"Life-Cycle Performance of Deteriorating Structural Systems under Uncertainty: Review", J. Struct. Eng., 142(9), F4016001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001544.   DOI
68 Broutman, L.J. and Sahu, S. (1972), "A new theory to predict cumulative fatigue damage in fiberglass reinforced plastics", In Composite Materials: Testing and Design (second conference), West Conshohocken, PA.
69 Carta, J.A., Ramirez, P. and Velazquez, S. (2009), "A review of wind speed probability distributions used in wind energy analysis: Case studies in the Canary Islands", Renewable Sustainable Energy Reviews, 13, 933-955. https://doi.org/10.1016/j.rser.2008.05.005.   DOI
70 CECS 230 (2008), Specification for Design of Steel-Concrete Mixed Structure Of Tall Buildings, Professional Standard of the People's Republic of China. China Planning Press, Beijing, China.
71 Kareem, A. (1987), "Wind effects on structures: a probabilistic viewpoint", Prob. Eng. Mech., 2(4), 166-200. https://doi.org/10.1016/0266-8920(87)90009-9.   DOI
72 Jang, Y.J., Choi, C.W., Lee, J.H. and Kang, K.W. (2015), "Development of fatigue life prediction method and effect of 10-minute mean wind speed distribution on fatigue life of small wind turbine composite blade", Renewable Energy, 79, 187-198. https://doi.org/10.1016/j.renene.2014.10.006.   DOI
73 Jia, J. (2011), "Wind and structural modelling for an accurate fatigue life assessment of tubular structures", Eng. Struct., 33, 477-491. https://doi.org/10.1016/j.engstruct.2010.11.004.   DOI
74 Ju, B.S., Jung, W.Y. and Ryu, Y.H. (2013). "Seismic fragility evaluation of piping system installed in critical structures", Struct. Eng. Mech., 46(3), 337-352. https://doi.org/10.12989/sem.2013.46.3.337.   DOI
75 Ju, S. H. and Lin, M. C. (1999). "Comparison of building analyses assuming rigid or flexible floors", J. Struct. Eng. 125(1), 25-31. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(25)   DOI
76 Kaimal, J.C., Wyngaard, J.C., Izumi, Y. and Cote, O.R. (1972), Spectral Characteristics of Surface-Layer Turbulence, Wiley, New York, NY, USA.
77 Kibboua, A., Naili, M., Benouar, D. and Kehila, F. (2011). "Analytical fragility curves for typical Algerian reinforced concrete bridge piers", Struct. Eng. Mech., 39(3), 411-425. https://doi.org/10.12989/sem.2011.39.3.411.   DOI
78 Lemaitre, J. (1985), "A Continuous Damage Mechanics Model for Ductile Fracture", J. Eng. Materials Tech., 107, 83-89. https://doi.org/10.1115/1.3225775.   DOI
79 Li, C., Hao, H., Li, H.N. and Bi, K.M. (2015), "Theoretical modeling and numerical simulation of seismic motions at seafloor", Soil Dyn. Earthquake Eng., 77, 220-225. https://doi.org/10.1016/j.soildyn.2015.05.016.   DOI