Browse > Article
http://dx.doi.org/10.12989/sem.2020.75.5.529

Experimental and numerical studies on cyclic behavior of continuous-tenon joints in column-and-tie timber construction  

Qi, Liangjie (School of Civil Engineering, Xi'an University of Architecture & Technology)
Xue, Jianyang (School of Civil Engineering, Xi'an University of Architecture & Technology)
Xu, Dan (School of Civil Engineering, Xi'an University of Architecture & Technology)
Publication Information
Structural Engineering and Mechanics / v.75, no.5, 2020 , pp. 529-540 More about this Journal
Abstract
The mechanical properties of timber construction have drawn more attention after the 2013 Lushan earthquake. A strong desire to preserve this ancient architectural styles has sprung up in recent years, especially for residential buildings of the mountainous areas. In the column-and-tie timber construction, continuous-tenon joints are the most common structural form to connect the chuanfang (similar to the beam in conventional structures) and the column. To study the cyclic performance of the continuous-tenon joints in column-and-tie timber construction, the reversed lateral cyclic loading tests were carried out on three 3/4 scale specimens with different section heights of the chuanfang. The mechanical behavior was assessed by studying the ultimate bending capacity, deformation ductility and energy dissipation capacity. Test results showed that the slippage of chuanfang occurred when the specimens entered the plastic stage, and the slippage degree increased with the increase of the section height of chuanfang. An obvious plastic deformation of the chuanfang occurred due to the mutual squeezing between the column and chuanfang. A significant pinching was observed on the bending moment-rotation curves, and it was more pronounced as the section height of chuanfang increased. The further numerical investigations showed that the flexural capacity and initial stiffness of the continuous-tenon joints increased with the increase of friction coefficient between the chuanfang and the column, and a more obvious increasing of bending moment occurred after the material yielding. The compressive strength perpendicular to grain of the material played a more significant role in the ultimate bending capacity of continuous-tenon joints than the compressive strength parallel to grain.
Keywords
column-and-tie timber construction; continuous-tenon joints; cyclic performance; parametric investigation; energy dissipation capability;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Chen, C., Qiu, H. and Lu, Y. (2016), "Flexural behaviour of timber dovetail mortise-tenon joints", Construct. Build. Mater., 112, 366-377. https://doi.org/10.1016/j.conbuildmat.2016.02.074.   DOI
2 Chen, L., Li, S., Wang, Y., Zhao, Y., Zhang, M., Song, X., Li, X., Wu, T. and Jiang, L. (2017), "Experimental study on the seismic behaviour of mortise-tenon joints of the ancient timbers", Struct. Eng., 27(4), 512-519. https://doi.org/10.2749/222137917X14881937844720.   DOI
3 Chen, Z. (2011), "Behaviour of typical joints and the structure of Yingxian Wood Pagoda", Ph.D. Dissertation, Harbin Institutive of Technology, Harbin, China.
4 Chun, Q., Yue, Z. and Pan, J. (2011), "Experimental study on seismic characteristics of typical mortise tenon joints of Chinese southern traditional timber frame buildings", Sci. China Technol. Sci., 54(9), 2404-2411. https://doi.org/10.1007/s11431-011-4448-3.   DOI
5 Cui, Y. (2015), "The finite element analysis of the hysteretic behavior of mortise-tenon joints and frames in ancient timber buildings", Master Dissertation, Xi'an University of Architecture and Technology, Xi'an, China.
6 Fang, D., Iwasaki, S., Yu, M., Shen, Q., Miyamoto, Y. and Hikosaka, H. (2001), "Ancient Chinese timber architecture. I: Experimental study", J. Struct. Eng., 127(11), 1348-1357. https://doi.org/10.1061/(asce)0733-9445(2001)127:11(1348).   DOI
7 GB 50165-92 (1992), Technical code for maintenance and strengthening of ancient timber buildings, China Architecture and Building Press; Beijing, China.
8 Guo, T. (2016), "Experimental study on the seismic behavior of traditional Chuan-Dou style wood frame", Master Dissertation, Chongqing University, Chongqing, China.
9 Hao, X. (2015), "An experimental study on the structural performance of beam-lifted frame and through type frame", Master Dissertation, Southeast University, Nanjing, China.
10 Li, Y., Cao, S. and Xue, J. (2016), "Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings", Struct. Eng. Mech., 60(5), 903-921. https://doi.org/10.12989/sem.2016.60.5.903.   DOI
11 McKenzie, W. and Karpovich, H. (1968), "The frictional behaviour of wood", Wood Sci. Technol., 2(2), 139-152. https://doi.org/10.1007/BF00394962.   DOI
12 Meng, X., Yang, Q., Wei, J. and Li, T. (2018), "Experimental investigation on the lateral structural performance of a traditional Chinese pre-Ming dynasty timber structure based on half-scale pseudo-static tests", Eng. Struct., 167, 582-591. https://doi.org/10.1016/j.engstruct.2018.04.077.   DOI
13 Murase, Y. (1984), "Friction of wood sliding on various materials", J. Faculty Agriculture Kyushu U., 28(4), 147-160. https://doi.org/10.1021/jf00126a056.   DOI
14 Vieux-Champagne, F., Sieffert, Y., Grange, S., Nko'ol, C., Bertrand, E., Duccini, J., Faye, C. and Daudeville, L. (2017), "Experimental analysis of a shake table test of timber-framed structures with stone and earth infill", Earthq. Spectra, 33(3), 1075-1100. https://doi.org/10.1193/010516EQS002M.   DOI
15 Pan, W., Xue, J. and Bai, Y. (2017), Seismic Performance and Reinforcement Design Method of Civil Structure Dwellings, Science Press, Beijing, China.
16 Qu, Z., Dutu, A., Zhong, J. and Sun, J. (2015), "Seismic Damage to Masonry-Infilled Timber Houses in the 2013 M7. 0 Lushan, China, Earthquake", Earthq. Spectra, 31(3), 1859-1874. https://doi.org/10.1193/012914EQS023T.   DOI
17 GB/T 1929-09 (2009), Method of sample logs sawing and test specimens selection for physical and mechanical tests of wood, Standard Press of China; Beijing, China.
18 Xie, Q., Wang, L., Zheng, P., Zhang, L. and Hu, W. (2018), "Rotational behavior of degraded traditional mortise-tenon joints: experimental tests and hysteretic model", J. Architectural Heritage, 12(1), 125-136. https://doi.org/10.1080/15583058.2017.1390629.   DOI
19 Xue, J., Qi, L., Yang, K. and Wu, Z. (2017), "Dynamic experimental study on single and double beam-column joints in steel traditional-style buildings", Struct. Eng. Mech., 63(5), 617-628. https://doi.org/10.12989/sem.2017.63.5.617.   DOI
20 Xue, J. and Xu, D. (2018), "Shake table tests on the traditional column-and-tie timber structures", Eng. Struct., 175, 847-860. https://doi.org/10.1016/j.engstruct.2018.08.090   DOI
21 Xue, J., Xu, D. and Qi, L. (2019), "Experimental seismic response of a column-and-tie wooden structure", Adv. Struct. Eng., 22(8), 1909-1922. https://doi.org/10.1177/1369433219828647   DOI
22 Zhang, W. (2019), "The seismic and lateral resistance of columnand-tie wooden buildings based on mortise-tenon joint", Wood Products J., 10(2), 86-91. https://doi.org/10.1080/20426445.2019.1636520   DOI
23 Yeo, S., Hsu, M., Komatsu, K., Chung, Y. and Chang, W. (2016), "Shaking table test of the Taiwanese traditional Dieh-Dou timber frame", J. Architectural Heritage, 10(5), 539-557. https://doi.org/10.1080/15583058.2015.1009574.   DOI
24 Yeo, S., Komatsu, K., Hsu, M., Chung, Y. and Chang, W. (2018), "Structural behavior of traditional Dieh-Dou timber main frame", J. Architectural Heritage, 12(4), 555-577. https://doi.org/10.1080/15583058.2018.1442518.   DOI
25 Yue, Z. (2014), "Traditional Chinese wood structure joints with an experiment considering regional differences", J. Architectural Heritage, 8(2), 224-246. https://doi.org/10.1080/15583058.2012.688179.   DOI
26 Zhang, X., Xue, J., Zhao, H. and Sui, Y. (2011), "Experimental study on Chinese ancient timber-frame building by shaking table test", Struct. Eng. Mech., 40(4), 453-469. http://dx.doi.org/10.12989/sem.2011.40.4.453.   DOI
27 Zhao, H., Xue, J. and Sui, Y. (2012), Structure and Seismic Resistance of Chinese Ancient Buildings: Test, Theory and Strengthening Method, Science Press, Beijing, China.
28 Zhuang, Z., You, X., Liao, J., Cen, S., Shen, X. and Liang, M. (2009), Finite Element Analysis and Application Based On ABAQUS, Tsinghua University Press, Beijing, China.