1 |
Zhang, Z., Wang, L. and Silberschmidt, V.V. (2017), "Damage response of steel plate to underwater explosion: Effect of shaped charge liner", J. Impact Eng., 103, 38-49. https://doi.org/10.1016/j.ijimpeng.2017.01.008.
DOI
|
2 |
Aslani, A. and Zamani Ashani, J. (2015), "A numerical analysis on effect of impedance and thickness of various layers on deflection of target plate in layered armor systems under explosive loading", J. Sci. Technol. Compos., 1(2), 11-20.
|
3 |
Azadi, M., Azadi, S., Zahedi, F. and Moradi, M. (2009), "Multidisciplinary optimization of a car component under NVH and weight constraints using RSM", ASME 2009 International Mechanical Engineering Congress and Exposition, 315-319, Florida, November.
|
4 |
Dorogoy, A., Rittel, D. and Brill, A. (2010), "A Study of inclined impact in polymethylmethacrylate plates", J. Impact Eng., 37(3), 285-294.
DOI
|
5 |
Isa, M. F. M., Risby, M. S., Norazman, M. N., Khalis, S., Hafizi, M. N. and Arif, S. (2018), "Simulation on the shock attenuation behavior of coupled RHA and sandwich composite panel under blast loading", J. Fundamental Appl. Sci., 9(3S), 555. https://doi.org/10.4314/jfas.v9i3s.43
DOI
|
6 |
Fedosov, S. A. (1999), "Laser beam hardening of carbon and low alloyed steels: discussion of increased quantity of retained austenite", J. Mater. Sci., 34(17), 4259-4264.
DOI
|
7 |
Gooch, W. A., Chen, B. H. C., Burkins, M. S., Palicka, R., Rubin, J. J. and Ravichandran, R. (1999), "Development and Ballistic Testing of a Functionally Gradient Ceramic/Metal Applique", Materials Science Forum, 308-311, 614-621. https://doi.org/10.4028/www.scientific.net/MSF.308-311.614
DOI
|
8 |
Holmquist, T. J. and Johnson, G. R. (2002), "Response of silicon carbide to high velocity impact", J. Appl. Phys., 91(9), 5858-5866. https://doi.org/10.1063/1.1468903.
DOI
|
9 |
Johnson, G. R. and Cook, W. H. (1985), "Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures", Eng. Fracture Mech., 21(1), 31-48. https://doi.org/10.1016/0013-7944(85)90052-9.
DOI
|
10 |
Keshavarz, M. (2007), "Detonation velocity of pure and mixed CHNO explosives at maximum nominal density", J. Hazardous Mater., 141(3), 536-539. https://doi.org/10.1016/j.jhazmat.2006.07.060
DOI
|
11 |
Kingery, C. N. and Bulmash, G. (1984), Airblast Parameters from TNT Spherical Air Burst and Hemispherical Surface Burst, US Army Armament and Development Center, Ballistic Research Laboratory.
|
12 |
Montgomery, D. C. (2012), Design and Analysis of Experiments (8th ed.), Wiley, Hoboken, NJ, USA.
|
13 |
Kinney, G. F. and Graham, K. J. (1985), Explosive Shocks in Air, Springer, Germany. https://doi.org/10.1007/978-3-642-86682-1
|
14 |
Lotfi, S. and Zahrai, S. M. (2018), "Blast behavior of steel infill panels with various thickness and stiffener arrangement", Struct. Eng. Mech., 65(5), 587-600. https://doi.org/10.12989/sem.2018.65.5.587.
DOI
|
15 |
Manual, K.U.S. (2012), LS-DYNA keyword user's manual Volume 1, Livermore Software Technology Corporation (LSTC), Livermore, CA, USA.
|
16 |
Mazek, S. A. and Wahab, M. (2015), "Impact of composite materials on buried structures performance against blast wave", Struct. Eng. Mech., 53(3), 589-605. https://doi.org/10.12989/sem.2015.53.3.589.
DOI
|
17 |
Mehreganian, N., Fallah, A. S., Boiger, G. K. and Louca, L. A. (2017), "Response of Armour Steel Square Plates To Localised Air Blast Load- a Dimensional Analysis", International Journal of Multiphysics, 11(December), 1-20. https://doi.org/10.21152/1750-9548.11.4.387
|
18 |
Moradi, M. and MohazabPak, A. R. (2018), "Statistical Modelling and Optimization of Laser Percussion Microdrilling of Inconel 718 Sheet Using Response Surface Methodology (RSM)", Lasers in Engineering (Old City Publishing), 39(3-6), 313-331.
|
19 |
Neuberger, A., Peles, S. and Rittel, D. (2007), "Scaling the response of circular plates subjected to large and close-range spherical explosions. Part I: Air-blast loading", J. Impact Eng., 34(5), 859-873. https://doi.org/10.1016/j.ijimpeng.2006.04.001.
DOI
|
20 |
Rajendran, R. and Lee, J. M. (2009), "Blast loaded plates", Marine Struct., 22(2), 99-127. https://doi.org/10.1016/j.marstruc.2008.04.001.
DOI
|
21 |
Randers-Pehrson, G. and Bannister, K.A. (1997), "Airblast Loading Model for DYNA2D and DYNA3D", Army Research Lab., Aberdeen Proving Ground, M.D., 15, 97.
|
22 |
Wang, A. J. and Hopkins, H. G. (1954), "On the plastic deformation of built-in circular plates under impulsive load", J. Mech. Phys. Solids, 3(1), 22-37. https://doi.org/10.1016/0022-5096(54)90036-8.
DOI
|
23 |
Haghi, R., Bashir Behjat, M. and Yazdani, M. (2017), "Numerical Investigation of Composite Structures under Blast Loading", J. Mater. Environ. Sci., 8(6), 2231-2237.
|
24 |
Robbins, J. R., Ding, J. L. and Gupta, Y. M. (2004), "Load spreading and penetration resistance of layered structures-a numerical study". J. Impact Eng., 30(6), 593-615. https://doi.org/10.1016/j.ijimpeng.2003.08.001.
DOI
|
25 |
Shackelford, J. F., Han, Y.H., Kim, S. and Kwon, S.H. (2016), CRC Materials Science and Engineering Handbook, CRC Press, Florida, USA.
|
26 |
Wang, Y.F. and Yang, Z.G. (2008), "Finite element model of erosive wear on ductile and brittle materials", Wear, 265(5-6), 871-878.
DOI
|
27 |
Wisniewski, A. and Tomaszewski, L. (2009), "Analysis of penetration depth with the use of AUTODYN 5 programme", Problemy Techniki Uzbrojenia, 38(110), 47-56.
|
28 |
Wyser, Y., Pelletier, C. and Lange, J. (2001), Predicting and determining the bending stiffness of thin films and laminates. Packaging Technol. Sci., 14(3), 97-108. https://doi.org/10.1002/pts.540.
DOI
|
29 |
Zamani, J. and Goudarzi, M. (2015), "Experimental and numerical investigation of the maximum deflection of circular aluminum plate subjected to free air explosion", Modares Mechanical Engineering, 15(1), http://journals.modares.ac.ir/article-15-10331-en.html.
|
30 |
Zhang, Y., Outeiro, J.C. and Mabrouki, T. (2015), "On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4V Using Three Types of Numerical Models of Orthogonal Cutting", Procedia CIRP, 31, 112-117. https://doi.org/https://doi.org/10.1016/j.procir.2015.03.052.
DOI
|