Browse > Article
http://dx.doi.org/10.12989/sem.2019.69.1.077

Structural performance of recycled aggregates concrete sourced from low strength concrete  

Goksu, Caglar (Istanbul Technical University, Civil Engineering Faculty)
Saribas, Ilyas (Istanbul Technical University, Civil Engineering Faculty)
Binbir, Ergun (Istanbul Technical University, Civil Engineering Faculty)
Akkaya, Yilmaz (Istanbul Technical University, Civil Engineering Faculty)
Ilki, Alper (Istanbul Technical University, Civil Engineering Faculty)
Publication Information
Structural Engineering and Mechanics / v.69, no.1, 2019 , pp. 77-93 More about this Journal
Abstract
Although much research has been carried out using recycled aggregates sourced from normal strength concrete, most of the buildings to be demolished are constructed with low strength concrete. Therefore, the properties of the concrete incorporating recycled aggregates, sourced from the waste of structural elements cast with low strength concrete, were investigated in this study. Four different concrete mixtures were designed incorporating natural and recycled aggregates with and without fly ash. The results of the mechanical and durability tests of the concrete mixtures are presented. Additionally, full-scale one-way reinforced concrete slabs were cast, using these concrete mixtures, and subjected to bending test. The feasibility of using conventional reinforced concrete theory for the slabs made with structural concrete incorporating recycled aggregates was investigated.
Keywords
bond; durability; flexural behavior; low strength concrete; recycled aggregate; reinforced concrete; slab; three-point bending test;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 De Brito, J., Ferreira, J., Pacheco, J., Soares, D. and Guerreiro, M. (2016), "Structural, material, mechanical and durability properties and behaviour of recycled aggregates concrete", J. Build. Eng., 61-16.   DOI
2 Fathifazl, G., Fazaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B. and Foo, S. (2011), "Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate", Cement Concrete Comp., 33(10), 1026-1037.   DOI
3 Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cement Concrete Comp., 24(2), 269-279.   DOI
4 ASTM C114-05 (2005), Standard Test Methods for Chemical Analysis of Hydraulic Cement, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
5 ASTM C1202 (2017), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
6 ASTM C1260 (2014), Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method), ASTM International, West Conshohocken, Pennsylvania, U.S.A.
7 ASTM C234 (1991), Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
8 ASTM D422-63 (2007), Standard Test Method for Particle-Size Analysis of Soils, ASTM International, West Conshohocken, PA.
9 ASTM C597 (2002), Standard Test Method for Pulse Velocity through Concrete, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
10 Attaullah, S., Irfan, U., Raza U.K and Ehsan, U.Q. (2013), "Experimental investigation on the use of recycled aggregates in producing concrete", Struc. Eng. Mech., 47(4), 545-557.   DOI
11 Baker, A. (1956), Ultimate Load Theory Applied to the Design of Reinforced and Prestressed Concrete Frames, Concrete Publications Ltd., London, U.K.
12 Bamforth, P.M. (1999), "The derivation of input data for modelling chloride ingress from eight-year uk coastal exposure trials", Mag. Conc. Res., 51(2), 87-96.   DOI
13 Corinaldesi, V. (2010), "Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates", Constr. Build. Mater., 24(9), 1616-1620.   DOI
14 Cosgun, C., Comert, M., Demir, C. and Ilki, A. (2012), "FRP retrofit of a full-scale 3D RC frame", Proceedings of the 6th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, Rome, Italy.
15 Marceau, M.L., Gajda, J. and Van Geem, M.G. (2002), Use of Fly Ash in Concrete: Normal and High Volume Ranges, PCA R&D Serial No. 2604, Portland Cement Association, Skokie, Illinois.
16 Marsh, B.K., Day R.L. and Bonner, D.G. (1985), "Pore structure characteristics affecting the permeability of cement paste containing fly ash", Cement Concrete Res., 15(6), 1027-1038.   DOI
17 Mattock, A.H. (1967), "Discussion of 'rotational capacity of reinforced concrete beams", J. Struct. Div., 93(ST2), 519-522.   DOI
18 Pacheco Torgal, F., Tam, V.W.Y., Labrincha, J.A., Ding Y. and De Brito, J. (2013), Handbook of Recycled Concrete and Demolition Waste, Woodhead Publishing Limited.
19 Michaud, K., Hoult, N., Lotfy, A. and Lum, P. (2016), "Performance in shear of reinforced concrete slabs containing recycled concrete aggregate", Mater. Struct., 49(10), 4425-4438.   DOI
20 Ngala, V.T., Page, C.L., Parrott L.J. and Yu, S.W. (1995), "Diffusion in cementitious materials: ii further investigations of chloride and oxygen diffusion in well-cured opc and opc/30%pfa pastes", Cement Concrete Res., 25(4) 819-826.
21 Palaniraj, S. and Dhinakaran, G. (2013), "Durability characteristics of recycled aggregate concrete", Struct. Eng. Mech., 47(5), 705-711.
22 Poon, C.S., Shui, Z.H. and Lam, L. (2004), "Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates", Constr. Build. Mater., 18(6), 461-468.   DOI
23 Rahal, K. (2007), "Mechanical properties of concrete with recycled coarse aggregate", Build. Environ., 42(1), 407-415.   DOI
24 Rakshvir, M. and Barai, S.V. (2006), "Studies on recycled aggregates based concrete", Waste Mng. Res., 24(3), 225-233.   DOI
25 Rao, H.S., Reddy, V.S.K. and Ghorpade, V.G. (2012), "Influence of recycled coarse aggregate on punching behaviour of recycled coarse aggregate concrete slabs", Int. J. Mod. Eng. Res., 2(4), 2815-2820.
26 Rao, M.C., Bhattacharyya, S.K. and Barai, S.V. (2011), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44(1), 205-220.   DOI
27 Page, C.L., Short, N.R. and El Tarras, A. (1981), "Diffusion of chloride ions in hardened cement pastes", Cement Concrete Res., 11(3) 395-406.   DOI
28 Rise, N., De Brito, J., Correia, J.R. and Arruda, M.R.T. (2015), "Punching behaviour of concrete slabs incorporating coarse recycled concrete aggregates", Eng. Struct., 100, 238-248.   DOI
29 Sanchez, M. and Gutierrez, P.A. (2004), "Influence of recycled aggregate quality on concrete properties", Proceeding of the International RILEM Conference: The Use of Recycled Materials in Building and Structures, Barcelona, Spain.
30 Schubert, S., Hoffmann, C., Leemann, A., Moser, K. and Motavalli, M. (2012), "Recycled aggregate concrete: Experimental shear resistance of slabs without shear reinforcement", Eng. Struct., 41, 490-497.   DOI
31 Tangchirapat, W., Buranasing, R. and Jaturapitakkul, C. (2010), "Use of high fineness of fly ash to improve properties of recycled aggregate concrete", J. Mater. Civil Eng., 22(6), 565-571.   DOI
32 Shayan, A. And Xu, A. (2003), "Performance and properties of structural concrete made with recycled concrete aggregate", ACI Mat. J., 100(5), 371-380.
33 Silva, R.V., DeBrito, J. and Dhir, R.K. (2015), "Prediction of the shrinkage behavior of recycled aggregate concrete: A review", Constr. Build. Mater., 77, 327-339.   DOI
34 Sim, J. and Park, C. (2011), "Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate", Waste Mng., 31(11), 2352-2360.   DOI
35 Thomas, M.D.A. (1989), "The effect of curing on the hydration and pore structure of hardened cement paste containing pulverized-fuel ash", Adv. Cement Res., 2(8), 181-188   DOI
36 Tapan, M., Comert, M., Demir, C., Sayan, Y., Orakcal, K. and Ilki, A. (2013), "Failures of structures during the October 23, 2011 Tabanli (Van) and November 9, 2011 Edremit (Van) earthquakes in Turkey", Eng. Fail. Analy., 34, 606-628.   DOI
37 Thomas, C., Setien, J. and Polanco, J.A. (2016), "Structural recycled aggregate concrete made with precast wastes", Constr. Build. Mater., 114, 536-546.   DOI
38 Thomas, M. (2007), Optimizing the Use of Fly Ash in Concrete, PCA, 24.
39 Thomas, M.D.A. (2004), Prevention of Reinforcement Corrosion in Concrete Structures. Part i: Carbonation-Induced Corrosion, Canadian Civil Engineer: Special Issue on Durability of Concrete Structures, 22-25.
40 Thomas, M.D.A., Mukherjee, P.K., Sato, J.A. and Everitt, M.F. (1995), "Effect of fly ash composition on thermal cracking in concrete", Proceedings of the 5th CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, ACI SP-153, American Concrete Institute, Detroit, Michigan, U.S.A.
41 Thomas, M.D.A., Shehata, M. and Shashiprakash, S.G. (1999), "The use of fly ash in concrete: Classification by composition", Cement Concrete Agg., 12(2), 105-110.
42 Thomas, M.D.A. and Wilson, M.L. (2002), Supplementary Cementing Materials for Use in Concrete, CD038, PCA, Skokie, IL.
43 TS EN 1097-2 (2010), Tests for Mechanical and Physical Properties of Aggregates-Part 2: Methods for the Determination of Resistance to Fragmentation, Turkish Standards Institute, Ankara, Turkey.
44 TS EN 12390-6 (2002), Testing Hardened Concrete-Part 6: Tensile Splitting Strength of Test Specimens, Turkish Standards Institute, Ankara, Turkey.
45 TS EN 1097-6 (2013), Tests for Mechanical and Physical Properties of Aggregates-Part 6: Determination of Particle Density and Water Absorption, Turkish Standards Institute, Ankara, Turkey.
46 TS EN 12390-3 (2002), Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens, Turkish Standards Institute, Ankara, Turkey.
47 TS EN 12390-5 (2002), Testing Hardened Concrete-Part 5: Flexural Strength of Test Specimens, Turkish Standards Institute, Ankara, Turkey.
48 TS EN 1367-2 (2011), Tests for Thermal and Weathering Properties of Aggregates-Part 2: Magnesium Sulfate Test, Turkish Standards Institute, Ankara, Turkey.
49 TS EN 1367-4 (2009), Tests for Thermal and Weathering Properties of Aggregates Part 4: Determination of Drying Shrinkage, Turkish Standards Institute, Ankara, Turkey.
50 TS EN 1744-1 (2013), Tests for Chemical Properties of Aggregates-Part 1: Chemical Analysis, Turkish Standards Institute, Ankara, Turkey.
51 TS EN 933-1 (2012), Tests for Geometrical Properties of Agregates-Part 1: Determination of Particle Size Distribution Sieving Method, Turkish Standards Institute, Ankara, Turkey.
52 TS EN 933-3 (2012), Test for Geometrical Properties of Aggregates-Part 2: Determination of Particle Size Distribution-Test Sieves, Nominal Size of Apartures, Turkish Standards Institute, Ankara, Turkey.
53 Urban Transformation Act, 06/05/2012-6306 (2012), The Law of Transformation of Areas Under the Disaster Risk, Republic of Turkey Ministry of Environment and Urbanization, Ankara, Turkey.
54 TS EN 933-4 (2009), Tests for Geometrical Properties of Aggregates-Part 4: Determination of Particle Shape - Shape Index, Turkish Standards Institute, Ankara, Turkey.
55 TS EN 933-9 (2010), Tests for geometrical properties of aggregates-Part 9: Assessment of fines - methylene blue test, Turkish Standards Institute, Ankara, Turkey.
56 Turkish Seismic Design Code (TSDC) (2017), Regulations for Buildings to be Constructed in Earthquake Prone Areas, Ankara, Turkey.
57 Vyas, C.M. and Bhatt, D.R. (2013), "Evaluation of modulus of elasticity for recycled coarse aggregate concrete", Int. J. Eng. Sci. Innov. Technol., 2(1), 26.
58 Xiao, J., Li, L., Tam, V.W. and Li, H. (2014), "The state of the art regarding the long-term properties of recycled aggregate concrete", Struct. Conc., 15(1), 3-12.   DOI
59 Xiao, J., Li, W., Sun, Z. and Shah, S.P. (2012), "Crack propagation in recycled aggregate concrete under uniaxial compressive loading, ACI Mater. J., 109(4), 451-462.
60 Hasan, N.K., Nasim, K.S. and Khaled, H.H. (2017), "Effect of silica fume on mechanical properties of concrete containing recycled asphalt pavement", Struct. Eng. Mech., 62(3), 357-364.   DOI
61 Henschen, J., Teramoto, A. And Lange, D.A. (2012), "Shrinkage and creep performance of recycled aggregate concrete", Proceedings of the 7th RILEM International Conference on Cracking in Pavements, the Netherlands.
62 Ho, N.Y., Lee, Y.P.K., Lim, W.F., Zayed, T., Chew, K.C., Low, G.L. and Ting, S.K. (2013), "Efficient utilization of recyceled concrete aggregate in structural concrete", J. Mat. Civil Eng., 25(3), 318-327.   DOI
63 Ilki, A. And Celep, Z. (2012), "Earthquakes, existing buildings, and seismic design codes in Turkey", Arab. J. Sci. Eng., 37(2), 365-380.   DOI
64 Jones, R. and Facaoaru, I. (1969), "Recommendations for testing concrete by the ultrasonic pulse method", Mat. Str. (RILEM) 2(10), 275-284.
65 Khalaf, F.M. and DeVenny, A.S. (2004), "Recycling of demolished masonry rubble as coarse aggregate in concrete: Review", ASCE J. Mater. Civil Eng., 16(4), 331-340.   DOI
66 Kou, S.C., Poon, C.S. and Wan, H.W. (2012), "Properties of concrete prepared with low-grade recycled aggregates", Constr. Build. Mater., 36, 881-889.   DOI
67 Limbachiya, M.C., Koulouris, A., Roberts, J.J. and Fried, A.N. (2004), "Performance of recycled concrete aggregate", Proceedings of the International Symposium on Environmental-Conscious Materials and Systems for Sustainable Development, Koriyama, Japan.
68 Hansen, T.C. (1992), Recycling of Demolished Concrete and Masonry, E&FN SPON, London, U.K.
69 Gomez, J.M.V. (2002b), "Creep of concrete with substitution of normal aggregate by recycled concrete aggregate", ACI Spec. Publ., 209, 461-474.
70 Gonçalves, P. and De Brito, J. (2009), "Recycled aggregate concrete (RAC)-comparative analysis of existing specifications", Mag. Concrete Res.
71 XTRACT 3.0.8 (Computer software), Rancho Cordova, CA, TRC.
72 Yang, K.H., Chung, H.S. and Ashour, A. (2008), "Influence of type and replacement level of recycled aggregates on concrete properties", ACI Mater. J., 3, 289-296.
73 Yehia, S., Khan, S. and Abudayyeh, O. (2008), "Evaluation of mechanical properties of recycled aggregate for structural applications", HBRC J., 4(3), 7-16.
74 Zhou, J.H., Wang, X.B. and Yu, T.H. (2008), "Mechanic behavior test on recycled concrete simply-supported rectangular slabs", J. Shenyang Jianzhu Univ. Nat. Sci., 24(3), 41-415.
75 fib (Federation International du Beton/International Federation for Structural Concrete), (2010), Model Code 2010, Lausanne, Switzerland.
76 Lopez-Gayarre, F., Serna, P., Domingo-Cabo, A., Serrano-Lopez, M.A. and Lopez-Colina, C. (2009), "Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties", Waste Mng., 29(12), 3022-3028.   DOI
77 Malesev, M., Radonjanin, V. and Marinkovic, S. (2010), "Recycled concrete as aggregate for structural concrete production", Sustainab., 2(5), 1204-1225.   DOI
78 Fathifazl, G. and Razaqpur, A.G. (2013), "Creep rheological models for recycled aggregate concrete", ACI Mater. J., 110(2), 115-126.
79 Francesconi, L., Pani, L. and Stochino, F. (2016), "Punching shear strength of reinforced recycled concrete slabs", Constr. Build. Mater., 127, 248-263.   DOI
80 Garg, P., Singh, H. and Walia, B.S. (2013), "Optimum size of recycled aggregate", GE-Int. J. Eng. Res., 35-41.
81 Ghatte, H.F., Comert, M., Demir, C. and Ilki, A. (2016), "Evaluation of FRP confinement models for substandard rectangular RC columns based on full-scale reversed cyclic lateral loading tests in strong and weak directions", Polym., 8(323), 1-24.   DOI
82 Gomez, J.M.V. (2002a), "Shrinkage of concrete with replacement of aggregate with recycled concrete aggregate", ACI Spec. Publ., 209, 475-496.
83 Xiao, J., Sun, C. And Jiang, X. (2015), "Flexural behaviour of recycled aggregate concrete graded slabs", Struct. Concrete, 16(2), 249-261.   DOI