Browse > Article
http://dx.doi.org/10.12989/sem.2018.66.4.487

Three dimensional finite elements modeling of FGM plate bending using UMAT  

Messaoudi, Khalid (Computational Mechanics Laboratory, University of Tlemcen, Faculty of Technology, Mechanical Engineering Department)
Boukhalfa, Abdelkrim (Computational Mechanics Laboratory, University of Tlemcen, Faculty of Technology, Mechanical Engineering Department)
Beldjelili, Youcef (Material and Hydrology Laboratory, University of Sidi Bel-Abbes, Faculty of Technology, Civil Engineering Department)
Publication Information
Structural Engineering and Mechanics / v.66, no.4, 2018 , pp. 487-494 More about this Journal
Abstract
The purpose of the present paper is to study the bending and free vibration of Functionally Graded Material (FGM) plate using user-defined material subroutine on the finite element software ABAQUS. The FGM plate is simply supported and subjected to sinusoidal and uniform load. The Poisson's ratio is kept constant. The results obtained compared to those available in the literature show the convergence, the exactitude and the efficiency of the method used with various power index of the materials.
Keywords
FGM plate; power law; UMAT; finite element method; stress; displacement;
Citations & Related Records
Times Cited By KSCI : 27  (Citation Analysis)
연도 인용수 순위
1 Beldjelili, Y., Tounsi, A. and Mahmoud, S.R. (2016), "Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory", Smart Struct. Syst., 18(4), 755-786.   DOI
2 Belkorissat, I., Houari, M.S.A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S. (2015), "On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model", Steel Compos. Struct., 18(4), 1063-1081.   DOI
3 Bellifa, H., Bakora, A., Tounsi, A., Bousahla, A.A. and Hassan, S. (2017), "An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates", Steel Compos. Struct., 25(3), 257-270.   DOI
4 Bellifa, H., Benrahou, K.H., Hadji, L., Houari, M.S.A. and Tounsi, A. (2016), "Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position", J. Brazilian Soc. Mech. Sci. Eng., 38(1), 265-275.   DOI
5 Bennoun, M., Houari, M.S.A. and Tounsi, A. (2016), "A novel five-variable refined plate theory for vibration analysis of functionally graded sandwich plates", Mech. Adv. Mater. Struct., 23(4), 423-431.   DOI
6 Benyoucef, S., Mechab, I., Tounsi, A., Fekrar, A., Ait Atmane, H. and Adda Bedia, E.A. (2010), "Bending of thick functionally graded plates resting on WinklerPasternak elastic foundations", Mech. Compos. Mater., 46(4), 425-434.   DOI
7 Besseghier, A., Houari, M.S.A., Tounsi, A. and Hassan, S. (2017), "Free vibration analysis of embedded nanosize FG plates using a new nonlocal trigonometric shear deformation theory", Smart Struct. Syst., 19(6), 601-614.   DOI
8 Bouafia, K., Kaci, A., Houari, M.S.A., Benzair, A. and Tounsi, A. (2017), "A nonlocal quasi-3D theory for bending and free flexural vibration behaviors of functionally graded nanobeams", Smart Struct. Syst., 19(2), 115-126.   DOI
9 Lavate, P.S. and Shiyekar, S. (2015), "Flexure analysis of functionally graded (FG) plates using Reddy's shear deformation theory", Adv. Struct. Eng., 25-34.
10 Larbi Chaht, F., Kaci, A., Houari, M.S.A., Tounsi, A., Anwar Beg, O. and Mahmoud, S.R. (2015), "Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect", Steel Compos. Struct., 18(2), 425-442.   DOI
11 Mahapatra, T.R., Panda, S.K. and Kar, V.R. (2016c), "Nonlinear flexural analysis of laminated composite panel under hygro-thermo-mechanical loading a micromechanical approach", Int. J. Comput. Meth., 13(3), 1650015.   DOI
12 Mahapatra, T.R., Kar, V.R. and Panda, S.K. (2016a), "Large amplitude bending behaviour of laminated composite curved panels", Eng. Comput., 33(1), 116-138.   DOI
13 Mahapatra, T.R., Kar, V.R., Panda, S.K. and Mehar, K. (2017), "Nonlinear thermoelastic deflection of temperature-dependent FGM curved shallow shell under nonlinear thermal loading", J. Therm. Stress., 40(9), 1184-1199.   DOI
14 Mahapatra, T.R., Panda, S.K. and Kar, V.R. (2016b), "Geometrically nonlinear flexural analysis of hygro-thermo-elastic laminated composite doubly curved shell panel", Int. J. Mech. Mater. Des., 12(2), 153-171.   DOI
15 Mahi, A., Adda Bedia, E.A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39(9), 2489-2508.   DOI
16 Matsunaga, H. (2009), "Stress analysis of functionally graded plates subjected to thermal and mechanical loadings", Compos. Struct., 87(4), 344-357.   DOI
17 Mehar, K. and Panda, S.K. (2017a), "Nonlinear static behavior of FG-CNT reinforced composite flat panel under thermomechanical load", J. Aerosp. Eng., 30(3), 4016100.   DOI
18 Boukhari, A., Ait Atmane, H., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2016), "An efficient shear deformation theory for wave propagation of functionally graded material plates", Struct. Eng. Mech., 57(5), 837-859.   DOI
19 Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013), "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., 14(1), 85-104.   DOI
20 Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422.   DOI
21 Bounouara, F., Benrahou, K.H., Belkorissat, I. and Tounsi, A. (2016), "A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation", Steel Compos. Struct., 20(2), 227-249.   DOI
22 Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), "A new simple shear and normal deformations theory for functionally graded beams", Steel Compos. Struct., 18(2), 409-423.   DOI
23 Bousahla, A.A., Benyoucef, S., Tounsi, A. and Mahmoud, S.R. (2016), "On thermal stability of plates with functionally graded coefficient of thermal expansion", Struct. Eng. Mech., 60(2), 313-335.   DOI
24 Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2014), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", Int. J. Comput. Methods, 11(6), 1350082.   DOI
25 Chakraverty, S. and Pradhan, K. (2014), "Free vibration of exponential functionally graded rectangular plates in thermal environment with general boundary conditions", Aerosp. Sci. Technol., 36, 132-156.   DOI
26 Mouffoki, A., Adda Bedia, E.A., Houari, M.S.A., Tounsi, A. and Hassan, S. (2017), "Vibration analysis of nonlocal advanced nanobeams in hygro-thermal environment using a new two-unknown trigonometric shear deformation beam theory", Smart Struct. Syst., 20(3), 369-383.   DOI
27 Mehar, K. and Panda, S.K. (2017b), "Numerical investigation of nonlinear thermomechanical deflection of functionally graded CNT reinforced doubly curved composite shell panel under different mechanical loads", Compos. Struct., 161, 287-298.   DOI
28 Dassault-Systemes (2011), Abaqus 6.11 Documentation, .
29 Mehar, K., Panda, S.K. and Patle, B.K. (2017), "Stress, deflection, and frequency analysis of CNT reinforced graded sandwich plate under uniform and linear thermal environment: A finite element approach", Polym. Compos.
30 Menasria, A., Bouhadra, A., Tounsi, A., Bousahla, A.A. and Hassan, S. (2017), "A new and simple HSDT for thermal stability analysis of FG sandwich plates", Steel Compos. Struct., 25(2), 157-175.   DOI
31 Oonishi, H., Noda, T., Ito, S., Kohda, A., Ishimaru, H., Yamamoto, M. and Tsuji, E. (1994), "Effect of hydroxyapatite coating on bone growth into porous titanium alloy implants under loaded conditions", J. Appl. Biomater., 5(1), 23-37.   DOI
32 Reddy, J.N. (2000), "Analysis of functionally graded plates", Int. J. Numer. Meth. Eng., 47(1-3), 663-684.   DOI
33 Sahoo, S.S., Panda, S.K. and Singh, V.K. (2015), "Experimental and numerical investigation of static and free vibration responses of woven glass/epoxy laminated composite plate", Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., 231(5), 463-478.
34 Sahoo, S.S., Panda, S.K., Singh, V.K. and Mahapatra, T.R. (2017), "Numerical investigation on the nonlinear flexural behaviour of wrapped glass/epoxy laminated composite panel and experimental validation", Arch. Appl. Mech., 87(2), 315-333.   DOI
35 Gouasmi, S., Megueni, A., Bouchikhi, A.S., Zouggar, K. and Sahli, A. (2015), "On the reduction of stress concentration factor around a notch using a functionally graded layer", Mater. Res., 18(5), 971-977.   DOI
36 Abdelaziz, H.H., Ait Amar Meziane, M., Bousahla, A.A., Tounsi, A., Hassan, S. and Alwabli, A.S. (2017), "An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sand wich plates with various boundary conditions", Steel Compos. Struct., 25(6), 693-704.   DOI
37 Abualnour, M., Houari, M.S.A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2018), "A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates", Compos. Struct., 184, 688-697.   DOI
38 Della Croce, L. and Venini, P. (2004), "Finite elements for functionally graded ReissnerMindlin plates", Comput. Meth. Appl. Mech. Eng., 193(9-11), 705-725.   DOI
39 El-Haina, F., Bakora, A., Bousahla, A.A., Tounsi, A. and Hassan, S. (2017), "A simple analytical approach for thermal buckling of thick functionally graded sandwich plates", Struct. Eng. Mech., 63(5), 585-595.   DOI
40 Gilhooley, D., Batra, R., Xiao, J., McCarthy, M. and Gillespie, J. (2007), "Analysis of thick functionally graded plates by using higher-order shear and normal deformable plate theory and MLPG method with radial basis functions", Compos. Struct., 80(4), 539-552.   DOI
41 Hamidi, A., Houari, M.S.A., Hassan, S. and Tounsi, A. (2015), "A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates", Steel Compos. Struct., 18(1), 235-253.   DOI
42 Thai, H.T. and Kim, S.E. (2013), "A simple higher-order shear deformation theory for bending and free vibration analysis of functionally graded plates", Compos. Struct., 96, 165-173.   DOI
43 Ait Amar Meziane, M., Abdelaziz, H.H. and Tounsi, A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318.   DOI
44 Hebali, H., Tounsi, A., Houari, M.S.A., Bessaim, A. and Adda Bedia, E.A. (2014), "New quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", J. Eng. Mech., 140(2), 374-383.   DOI
45 Hirano, T., Teraki, J. and Yamada, T. (1990), "On the design of functionally gradient materials", Proceedings of the 1st Symposium on Functional Gradient Materials, Sendai, Japan.
46 Hosseini-Hashemi, S., Fadaee, M. and Atashipour, S.R. (2011a), "A new exact analytical approach for free vibration of ReissnerMindlin functionally graded rectangular plates", Int. J. Mech. Sci., 53(1), 11-22.   DOI
47 Saidi, H., Tounsi, A. and Bousahla, A.A. (2016), "A simple hyperbolic shear deformation theory for vibration analysis of thick functionally graded rectangular plates resting on elastic foundations", Geomech. Eng., 11(2), 289-307.   DOI
48 Thai, H.T. and Choi, D.H. (2011), "A refined plate theory for functionally graded plates resting on elastic foundation", Compos. Sci. Technol., 71(16), 1850-1858.   DOI
49 Thai, H.T. and Choi, D.H. (2013), "A simple first-order shear deformation theory for the bending and free vibration analysis of functionally graded plates", Compos. Struct., 101, 332-340.   DOI
50 Tounsi, A., Houari, M.S.A., Benyoucef, S. and Adda Bedia, E.A. (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aerosp. Sci. Technol., 24(1), 209-220.   DOI
51 Watari, F., Yokoyama, A., Saso, F., Uo, M. and Kawasaki, T. (1997), "Fabrication and properties of functionally graded dental implant", Compos. Part B Eng., 28(1-2), 5-11.
52 Zemri, A., Houari, M.S.A., Bousahla, A.A., Tounsi, A., Zemri, A., Houari, M.S.A., Bousahla, A.A. and Tounsi, A. (2015), "A mechanical response of functionally graded nanoscale beam: an assessment of a refined nonlocal shear deformation theory beam theory", Struct. Eng. Mech., 54(4), 693-710.   DOI
53 Zenkour, A.M. (2006), "Generalized shear deformation theory for bending analysis of functionally graded plates", Appl. Math. Model., 30(1), 67-84.   DOI
54 Kar, V.R. and Panda, S.K. (2015b), "Thermoelastic analysis of functionally graded doubly curved shell panels using nonlinear finite element method", Compos. Struct., 129, 202-212.   DOI
55 Zidi, M., Tounsi, A., Houari, M.S.A., Adda Bedia, E.A. and Anwar Beg, O. (2014), "Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory", Aerosp. Sci. Technol., 34, 24-34.   DOI
56 Hosseini-Hashemi, S., Fadaee, M. and Atashipour, S.R. (2011b), "Study on the free vibration of thick functionally graded rectangular plates according to a new exact closed-form procedure", Compos. Struct., 93(2), 722-735.   DOI
57 Houari, M.S.A., Tounsi, A., Bessaim, A. and Mahmoud, S.R. (2016), "A new simple three-unknown sinusoidal shear deformation theory for functionally graded plates", Steel Compos. Struct., 22(2), 257-276.   DOI
58 Kar, V.R., Mahapatra, T.R. and Panda, S.K. (2015), "Nonlinear flexural analysis of laminated composite flat panel under hygro-thermo-mechanical loading", Steel Compos. Struct., 19(4), 1011-1033.   DOI
59 Kar, V.R. and Panda, S.K. (2015a), "Large deformation bending analysis of functionally graded spherical shell using FEM", Struct. Eng. Mech., 53(4), 661-679.   DOI
60 Ait Yahia, S., Ait Atmane, H., Houari, M.S.A. and Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., 53(6), 1143-1165.   DOI
61 Al-Basyouni, K.S., Tounsi, A. and Mahmoud, S.R. (2015), "Size dependent bending and vibration analysis of functionally graded micro beams based on modified couple stress theory and neutral surface position", Compos. Struct., 125, 621-630.   DOI
62 Arani, A.G., Cheraghbak, A. and Kolahchi, R. (2016), "Dynamic buckling of FGM viscoelastic nanoplates resting on orthotropic elastic medium based on sinusoidal shear deformation theory", Struct. Eng. Mech., 60(3), 489-505.   DOI
63 Attia, A., Tounsi, A., Adda Bedia, E.A. and Hassan, S. (2015), "Free vibration analysis of functionally graded plates with temperature-dependent properties using various four variable refined plate theories", Steel Compos. Struct., 18(1), 187-212.   DOI
64 Aydogdu, M. (2008), "Conditions for functionally graded plates to remain flat under in-plane loads by classical plate theory", Compos. Struct., 82(1), 155-157.   DOI
65 Beldjelili, Y., Tounsi, A., Berrabah, H.M., Mechab, I., Adda Bedia, E.A. and Benaissa, S. (2009), "Natural frequencies of composite beams with a variable fiber volume fraction including rotary inertia and shear deformation", Appl. Math. Mech., 30(6), 717-726.   DOI
66 Kar, V.R. and Panda, S.K. (2016), "Nonlinear thermomechanical deformation behaviour of P-FGM shallow spherical shell panel", Chin. J. Aeronaut., 29(1), 173-183.   DOI
67 Kar, V.R., Panda, S.K. and Mahapatra, T.R. (2016), "Thermal buckling behaviour of shear deformable functionally graded single/doubly curved shell panel with TD and TID properties", Adv. Mater. Res., 5(4), 205-221.   DOI
68 Khetir, H., Bachir Bouiadjra, M., Houari, M.S.A., Tounsi, A. and Hassan, S. (2017), "A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates", Struct. Eng. Mech., 64(4), 391-402.   DOI
69 Barati, M.R. and Shahverdi, H. (2016), "A four-variable plate theory for thermal vibration of embedded FG nanoplates under non-uniform temperature distributions with different boundary conditions", Struct. Eng. Mech., 60(4), 707-727.   DOI
70 Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Anwar Beg, O. (2014), "An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates", Compos. Part B Eng., 60, 274-283.   DOI