Browse > Article
http://dx.doi.org/10.12989/sem.2018.65.5.587

Blast behavior of steel infill panels with various thickness and stiffener arrangement  

Lotfi, Saeid (Department of Civil Engineering, University of Kashan)
Zahrai, Seyed Mehdi (School of Civil Engineering, the University of Tehran)
Publication Information
Structural Engineering and Mechanics / v.65, no.5, 2018 , pp. 587-600 More about this Journal
Abstract
Infill panel is the first element of a building subjected to blast loading activating its out-of-plane behavior. If the infill panel does not have enough ductility against the loading, it breaks and gets damaged before load transfer and energy dissipation. As steel infill panel has appropriate ductility before fracture, it can be used as an alternative to typical infill panels under blast loading. Also, it plays a pivotal role in maintaining sensitive main parts against blast loading. Concerning enough ductility of the infill panel out-of-plane behavior, the impact force enters the horizontal diaphragm and is distributed among the lateral elements. This article investigates the behavior of steel infill panels with different thicknesses and stiffeners. In order to precisely study steel infill panels, different ranges of blast loading are used and maximum displacement of steel infill under such various blast loading is studied. In this research, finite element analyses including geometric and material nonlinearities are used for optimization of the steel plate thickness and stiffener arrangement to obtain more efficient design for its better out-of-plane behavior. The results indicate that this type of infill with out-of-plane behavior shows a proper ductility especially in severe blast loadings. In the blasts with high intensity, maximum displacement of infill is more sensitive to change in the thickness of plate rather the change in number of stiffeners such that increasing the number of stiffeners and the plate thickness of infill panel would decrease energy dissipation by 20 and 77% respectively. The ductile behavior of steel infill panels shows that using infill panels with less thickness has more effect on energy dissipation. According to this study, the infill panel with 5 mm thickness works better if the criterion of steel infill panel design is the reduction of transmitted impulse to main structure. For example in steel infill panels with 5 stiffeners and blast loading with the reflected pressure of 375 kPa and duration of 50 milliseconds, the transmitted impulse has decreased from 41206 N.Sec in 20 mm infill to 37898 N.Sec in 5 mm infill panel.
Keywords
steel infill panel; ductility; maximum displacement; blast loading; nonlinear analysis;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Zheng, C., Kong, X.S., Wu, W.G. and Liu, F. (2016), "The elasticplastic dynamic response of stiffened plates under confined blast load", J. Imp. Eng., 95, 141-153.   DOI
2 Zoghi, M.A. and Mirtaheria, M. (2016), "Progressive collapse analysis of steel building considering effects of infill panels", Struct. Eng. Mech., 59(1), 59-82.   DOI
3 ABAQUS, C. (2012), Analysis User's Manual, Version 6.12-3.
4 Al-Thairy, H. (2016), "A modified single degree of freedom method for the analysis of building steel columns subjected to explosion induced blast load", J. Imp. Eng., 94, 120-133.   DOI
5 Alisjahbana, S.W. and Wangsadinata, W. (2011), "Response of damped orthotropic stiffened plates subjected to a stepped triangular blast loading", Proc. Eng., 14, 989-996.   DOI
6 ASCE (2011), Design of Blast Resistant Buildings in Petrochemical Facilities, American Society of Civil Engineers, Petrochemical Committee, Task Committee on Blast Resistant Design, New York, U.S.A.
7 Azevedo, R.L. and Alves, M. (2008), "A numerical investigation on the visco-plastic response of structures to different pulse loading shapes", Eng. Struct., 30(1), 258-267.   DOI
8 Baker, W.E., Cox, P.A., Kulesz, J.J., Strehlow, R.A. and Westine, P. S. (2012), Explosion Hazards and Evaluation (Vol. 5), Elsevier Scientific Publishing Company, New York, U.S.A.
9 Biggs, J.M. (1964), Introduction to Structural Dynamics, McGraw-Hill College.
10 Clough, R.W. and Penzien, J. (1993), Dynamics of Structures, McGraw-Hill, New York, U.S.A.
11 Dharaneepathy, M.V. and Sudhesh, K.G. (1990), "Optimal stiffening of square plates subjected to air-blast loading", Comput. Struct., 36(5), 891-899.   DOI
12 DiPaolo, B.P. and Woodson, S.C. (2006), "An overview of research at ERDC on steel stud exterior wall systems subjected to severe blast loading", Proceedings of the Structures Congress 2006: Structural Engineering and Public Safety.
13 Elsanadedy, H.M., Almusallam, T.H., Alharbi, Y.R., Al-Salloum, Y.A. and Abbas, H. (2014), "Progressive collapse potential of a typical steel building due to blast attacks", J. Constr. Steel Res., 101, 143-157.   DOI
14 Geretto, C., Yuen, S.C.K. and Nurick, G.N. (2015), "An experimental study of the effects of degrees of confinement on the response of square mild steel plates subjected to blast loading", J. Imp. Eng., 79, 32-44.   DOI
15 Jacob, N., Yuen, S.C.K., Nurick, G.N., Bonorchis, D., Desai, S.A. and Tait, D. (2004), "Scaling aspects of quadrangular plates subjected to localised blast loads-experiments and predictions", J. Imp. Eng., 30(8), 1179-1208.   DOI
16 Hrynyk, T.D. and Myers, J.J. (2008), "Out-of-plane behavior of URM arching walls with modern blast retrofits: Experimental results and analytical model", J. Struct. Eng., 134(10), 1589-1597.   DOI
17 Iqbal, M.A., Senthil, K., Bhargava, P. and Gupta, N.K. (2015), "The characterization and ballistic evaluation of mild steel", J. Imp. Eng., 78, 98-113.   DOI
18 Jacob, N., Nurick, G.N. and Langdon, G.S. (2007), "The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads", Eng. Struct., 29(10), 2723-2736.   DOI
19 Johnson, G.R. and Cook, W.H. (1983), "A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures", Proceedings of the 7th International Symposium on Ballistics.
20 Jones, N. (2011), Structural Impact, Cambridge University Press.
21 Kadid, A. (2008), "Stiffened plates subjected to uniform blast loading", J. Civil Eng. Manage., 14(3), 155-161.   DOI
22 Markose, A. and Rao, C.L. (2017), "Mechanical response of V shaped plates under blast loading", Thin-Wall. Struct., 115, 12-20.   DOI
23 Mazek, S.A. (2014), "Performance of sandwich structure strengthened by pyramid cover under blast effect", Struct. Eng. Mech., 50(4), 471-486.   DOI
24 Mazek, S.A. and Wahab, M. (2015), "Impact of composite materials on buried structures performance against blast wave", Struct. Eng. Mech., 53(3), 589-605.   DOI
25 Nguyen, T.P. and Tran, M.T. (2011), "Response of vertical wall structures under blast loading by dynamic analysis", Proc. Eng., 14, 3308-3316.   DOI
26 Mendis, P. and Ngo, T. (2003), "Vulnerability assessment of concrete tall buildings subjected to extreme loading conditions", Proceedings of the CIB-CTBUH International Conference on Tall Buildings.
27 Moghimi, H. and Driver, R.G. (2010), "Computational analysis of steel plate shear walls under accidental blast loading", Proceedings of the 2nd Specialty Conference on Disaster Mitigation, Winnipeg, Manitoba, Canada.
28 Moghimi, H. and Driver, R.G. (2014), "Performance assessment of steel plate shear walls under accidental blast loads", J. Constr. Steel Res., 106, 44-56.
29 Olmati, P., Petrini, F. and Bontempi, F. (2013), "Numerical analyses for the structural assessment of steel buildings under explosions", Struct. Eng. Mech., 45(6), 803-819.   DOI
30 Pandey, A.K. (2010), "Damage prediction of RC containment shell under impact and blast loading", Struct. Eng. Mech., 36(6), 729-744.   DOI
31 Sabuwala, T., Linzell, D. and Krauthammer, T. (2005), "Finite element analysis of steel beam to column connections subjected to blast loads", J. Imp. Eng., 31(7), 861-876.   DOI
32 Salim, H., Dinan, R. and Townsend, P.T. (2005), "Analysis and experimental evaluation of in-fill steel-stud wall systems under blast loading", J. Struct. Eng., 131(8), 1216-1225.   DOI
33 Smilowitz, R. (2002), "Analytical tools for progressive collapse analysis", Proceedings of the National Workshop on Prevention of Progressive Collapse.
34 Smith, N.L., Tait, M.J., El-Dakhakhni, W.W. and Mekky, W.F. (2016), "Response analysis of reinforced concrete block infill panels under blast", J. Perform. Constr. Facilit., 30(6), 04016059.   DOI
35 Turkmen, H.S. and Mecitoglu, Z. (1999), "Dynamic response of a stiffened laminated composite plate subjected to blast load", J. Sound Vibr., 221(3), 371-389.   DOI
36 Smith, P.D. and Hetherington, J.G. (1994), Blast and Ballistic Loading of Structures, Butterworth and Heinemann, Oxford.
37 Snyman, I.M. (2010), "Impulsive loading events and similarity scaling", Eng. Struct., 32(3), 886-89.   DOI
38 Tavakoli, H.R. and Kiakojouri, F.O.A.D. (2014), "Numerical dynamic analysis of stiffened plates under blast loading", Lat. Am. J. Sol. Struct., 11(2), 185-199.   DOI
39 UFC 3-340-02 (2008), Structures to Resist the Effects of Accidental Explosions, Unified Facilities Criteria, US Department of Defense, Washington, U.S.A.
40 Wierzbicki, T. and Florence, A.L. (1970), "A theoretical and experimental investigation of impulsively loaded clamped circular viscoplastic plates", J. Sol. Struct., 6(5), 553-568.   DOI
41 Yuen, S.C.K., Langdon, G.S., Nurick, G.N., Pickering, E.G. and Balden, V.H. (2012), "Response of V-shape plates to localised blast load: Experiments and numerical simulation", J. Imp. Eng., 46, 97-109.   DOI
42 Zhang, P., Cheng, Y., Liu, J., Li, Y., Zhang, C., Hou, H. and Wang, C. (2016), "Experimental study on the dynamic response of foam-filled corrugated core sandwich panels subjected to air blast loading", Compos. Part B: Eng., 105, 67-81.   DOI