1 |
Pantano, A. and Averill, R.C. (2000), "A 3D zig-zag sublaminate model for analysis of thermal stresses in laminated composite and sandwich plate", J. Sandw. Struct. Mater., 2(3), 288-312.
DOI
|
2 |
Patel, B.P., Ganapathi, M. and Makhecha, D.P. (2002), "Hygrothermal effects on the structural behaviour of thick composite laminates using higher-order theory", Compos. Struct., 56, 25-34.
DOI
|
3 |
Puppo, A.H. and Evensen, H.A. (1970), "Interlaminar Shear in laminated composites under generalized plane stress", J. Compos. Mater., 4, 204-220.
DOI
|
4 |
Singh, S.K. and Chakrabarti, A. (2017), "Hygrothermal analysis of laminated composites using FE model based on higher order zigzag theory", Steel Compos. Struct., 23(1), 41-51.
DOI
|
5 |
Tahani, M. and Nosier, A. (2003), "Free edge stress analysis of general cross-ply composite laminates under extension and thermal loading", Compos. Struct., 60, 91-103.
DOI
|
6 |
Vaddadi, P., Nakamura, T. and Singh R.P. (2003), "Transient hygrothermal stresses in fiber reinforced composites: A heterogeneous characterization approach", Compos. Part A: Appl. Sci. Manufact., 34(8), 719-730.
DOI
|
7 |
Wang, Y.R. and Chou, T.W. (1989), "Three-dimensional transient interlaminar thermal stresses in angle-ply composites", J. Appl. Mech., 56(3), 601-608.
DOI
|
8 |
Wang, A.S.D. and Crossman, F.W. (1977), "Edge effects on thermally induced stresses in composite laminates", J. Compos. Mater., 11, 300-312.
DOI
|
9 |
Wang, S.S. and Choi, I. (1982), "Boundary-layer hygroscopic stresses in angle-ply composite laminates", AIAA J., 20(11), 1592-1598.
DOI
|
10 |
Yin, W.L. (1994), "Simple solution of the free-edge stresses in composite laminates under thermal and mechanical loads", J. Compos. Mater., 28(6), 573-386.
DOI
|
11 |
Kant, T. and Swaminathan, K. (2000), "Estimation of transverse/interlaminar stresses in laminated composites-a selective review and survey of current developments", Compos. Struct., 49, 65-75.
DOI
|
12 |
Zenkour, A.M. (2012), "Hygrothermal analysis of exponentially graded rectangular plates", J. Mech. Mater. Struct., 7(7), 687-700.
DOI
|
13 |
Zenkour, A.M., Mashat, D.S. and Alghanmi, R.A. (2014), "Hygrothermal analysis of antisymmetric cross-ply laminates using a refined plate theory", J. Mech. Mater. Des., 10(2), 213-226.
DOI
|
14 |
Zhu, S.Q., Chen, X. and Wang, X. (2007), "Response of dynamic interlaminar stresses in laminated plates under free vibration and thermal load", Struct. Eng. Mech., 25(6), 753-765.
DOI
|
15 |
Herakovich, C.T. (1976), "On thermal edge effects in composite laminates", J. Mech. Sci., 18(3), 129-134.
DOI
|
16 |
Huang, B. and Kim, H.S. (2015), "Interlaminar stress analysis of piezo-bonded composite laminates using the extended Kantorovich method", J. Mech. Sci., 90, 16-24.
DOI
|
17 |
Kim, H.S., Cho, M., Lee, J., Deheeger, A., Grediac, M. and Mathias, J.D. (2010), "Three-dimensional stress analysis of a composite patch using stress functions", J. Mech. Sci., 52, 1646-1659.
DOI
|
18 |
Kim, T. and Atluri, S.N. (1995), "Analysis of edge stresses in composite laminates under combined thermo-mechanical loading, using a complementary energy approach", Comput. Mech., 16, 83-97.
DOI
|
19 |
Lee, S.S. and Kim, B.S. (1997), "Boundary element analysis of singular thermal stresses in a unidirectional laminate", Struct. Eng. Mech., 5(6), 705-713.
DOI
|
20 |
Ahmadi I. (2016), "Edge stresses analysis in thick composite panels subjected to axial loading using layerwise formulation", Struct. Eng. Mech., 57(4), 733-762.
DOI
|
21 |
Lekhnitskii, S.G. (1981), Theory of Elasticity of an Anisotropic Body, Mir Publisher, Moscow, 104.
|
22 |
Lo, S.H., Zhen, W.U., Cheung, Y.K. and Wanji, C. (2010), "Hygrothermal effects on multilayered composite plates using a refined higher order theory", Compos. Struct., 92, 633-646.
DOI
|
23 |
Lu, X. and Liu, D. (1992), "An interlaminar shear stress continuity theory for both thin and thick composite laminates", J. Appl. Mech., 59(3), 502-509.
DOI
|
24 |
Matsunaga, H. (2004), "A comparison between 2-D single-layer and 3-D layerwise theories for computing interlaminar stresses of laminated composite and sandwich plates subjected to thermal loadings", Compos. Struct., 64(2), 161-177.
DOI
|
25 |
Ahmadi, I. (2017), "A Galerkin layerwise Formulation for three-dimensional stress analysis in long sandwich plates", Steel Compos. Struct., 24(5), 523-536.
DOI
|
26 |
Ahmadi I. and Aghdam, M.M. (2010), "A generalized plane strain meshless local Petrov-Galerkin method for the micromechanics of thermomechanical loading of composites", J. Mech. Mater. Struct., 5(4), 549-566.
DOI
|
27 |
Ahmadi I. and Aghdam, M.M. (2010), "Analysis of micro-stresses in the SiC/Ti metal matrix composite using a truly local meshless method", J. Mech. Eng. Sci., 224(8), 1567-1577.
DOI
|
28 |
Ahmadi, I. (2016), "Edge stresses analysis in laminated thick sandwich cylinder subjected to distributed hygrothermal loading", J. Sandw. Struct. Mater., 1099636216657681.
|
29 |
Ahmadi, I. and Najafi, M. (2016), Three-dimensional stresses analysis in rotating thin laminated composite cylindrical shells. Steel Compos. Struct., 22(5), 1193-1214.
DOI
|
30 |
Mittelstedt, C. and Becker, W. (2004), "Interlaminar stress concentrations in layered structures-part I: A selective literature survey on the free-edge effect since 1967", J. Compos. Mater., 38, 1037-1062.
DOI
|
31 |
Morton, S.K. and Webber, J.P.H. (1993), "Interlaminar failure due to mechanical and thermal stresses at the free edges of laminated plates", Compos. Sci. Technol., 47(1), 1-13.
DOI
|
32 |
Morton, S.K. and Webber, J.P.H. (1993), "An analytical solution for the thermal stresses at the free-edges of laminated plates", Compos. Sci. Technol., 46, 175-185.
DOI
|
33 |
Murugesan, N. and Rajamohan, V. (2015), "Investigation on interlaminar shear stresses in laminated composite beam under thermal and mechanical loading", Steel Compos. Struct., 18(3), 583-601.
DOI
|
34 |
Nath, J.K. and Kapuria, S. (2013), "Global-local and zigzag-local theories for direct transverse shear stress computation in piezolaminated plates under thermal loading", J. Mech. Sci., 75, 158-169.
DOI
|
35 |
Benkhedda, A., Tounsi, A. and Adda Bedia, E.A. (2008), "Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite plates", Compos. Struct., 82, 623-635.
|
36 |
Boukert, B., Benkhedda, A., Bedia, E.A. and Khodjet-Kesba, M. (2017), "Hygrothermomechanical behavior of thick composite plates using high order theory", Proc. Struct. Integr., 5, 115-122.
DOI
|
37 |
Brischetto, S. (2012), "Hygrothermal loading effects in bending analysis of multilayered composite plates", CMES-Comput. Model. Eng. Sci., 88(5), 367-418.
|
38 |
Murugesan, N. and Rajamohan, V. (2016), "Interlaminar shear stresses in laminated composite plates under thermal and mechanical loading", Mech. Adv. Mater. Struct., 23(5), 554-564.
DOI
|
39 |
Naidu, N.V.S. and Sinha, P.K. (2005), "Nonlinear finite element analysis of laminated composite shells in hygrothermal environments", Compos. Struct., 69, 387-395.
DOI
|
40 |
Nguyen, T.D. and Nguyen, D.H. (2007), "Interlaminar stresses and delamination of composite laminates under extension and bending", Struct. Eng. Mech., 25(6).
|
41 |
Padhi, A. and Pandit, M.K. (2016), "Behaviour of sandwich laminates subjected to thermal loading using higher-order zig-zag theory", J. Sandw. Struct. Mater., 18(2), 174-199.
DOI
|
42 |
Pagano, N.J. (1974), "On the calculation of interlaminar normal stress in composite laminate", J. Compos. Mater., 8(1), 65-81.
DOI
|
43 |
Farley, G.L. and Herakovich, C.T. (1978), "Influence of two-dimensional hygrothermal gradients on interlaminar stresses near free edges", Adv. Compos. Mater.-Environ. Effects, 143-159.
|
44 |
Brischetto, S. (2013), "Hygrothermoelastic analysis of multilayered composite and sandwich shells", J. Sandw. Struct. Mater., 15(2), 168-202.
DOI
|
45 |
Cho, M. and Kim, H.S. (2000), "Iterative free-edge stress analysis of composite laminates under extension, bending, twisting and thermal loadings", J. Sol. Struct., 37, 435-459.
DOI
|
46 |
Davi, G. and Milazzo, A. (1997), "Boundary element solution for free edge stresses in composite laminates", J. Appl. Mech., 64(4), 877-884.
DOI
|
47 |
Goodsell, J., Pagano, N.J., Kravchenko, O. and Pipes, R.B. (2013), "Interlaminar stresses in composite laminates subjected to anticlastic bending deformation", J. Appl. Mech., 80(4), 041020.
DOI
|
48 |
Goodsell, J. and Pipes, R.B. (2016), "Free-edge interlaminar stresses in angle-ply laminates: A family of analytic solutions", J. Appl. Mech., 83(5), 051010.
DOI
|
49 |
Hayashi, T. (1967), "Analytical study of interlaminar shear stresses in a laminated composite plate", Trans. Jap. Soc. Aeronaut. Eng. Space Sci., 10(17), 43-48.
|