Browse > Article
http://dx.doi.org/10.12989/sem.2017.64.6.723

Surface effects on flutter instability of nanorod under generalized follower force  

Xiao, Qiu-Xiang (School of Civil Engineering, Central South University)
Zou, Jiaqi (School of Civil Engineering, Central South University)
Lee, Kang Yong (State Key Laboratory of Structural Analysis for Industrial Equipment and Department of Engineering Mechanics, Dalian University of Technology)
Li, Xian-Fang (School of Civil Engineering, Central South University)
Publication Information
Structural Engineering and Mechanics / v.64, no.6, 2017 , pp. 723-730 More about this Journal
Abstract
This paper studies on dynamic and stability behavior of a clamped-elastically restrained nanobeam under the action of a nonconservative force with an emphasis on the influence of surface properties on divergence and flutter instability. Using the Euler-Bernoulli beam theory incorporating surface effects, a governing equation for a clamped-elastically restrained nanobeam is derived according to Hamilton's principle. The characteristic equation is obtained explicitly and the force-frequency interaction curves are displayed to show the influence of the surface effects, spring stiffness of the elastic restraint end on critical loads including divergence and flutter loads. Divergence and flutter instability transition is analyzed. Euler buckling and stability of Beck's column are some special cases of the present at macroscale.
Keywords
surface elasticity; flutter instability; divergence instability; nanocantilever; elastically restrained end;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Mutyalarao, M., Bharathi, D. and Rao, B.N. (2013), "Dynamic stability of cantilever columns under a tip-concentrated subtangential follower force", Math. Mech. Solid., 18(5), 449-463.   DOI
2 Park, H.S. (2008), "Surface stress effects on the resonant properties of silicon nanowires", J. Appl. Phys., 103(12), 123504.   DOI
3 Wang, K.F. and Wang, B. (2014), "Effect of surface energy on the sensing performance of bridged nanotube-based micro-mass sensors", J. Intell. Mater. Syst. Struct., 25(17), 2177-2186.   DOI
4 Wu, J.X., Li, X.F., Tang, A.Y. and Lee, K.Y. (2017), "Free and forced transverse vibration of nanowires with surface effects", J. Vib. Control, 23(13), 2064-2077.   DOI
5 Shen, J., Wu, J.X., Song, J., Li, X.F. and Lee, K.Y. (2012), "Flexural waves of carbon nanotubes based on generalized gradient elasticity", Phys. Stat. Sol. B, 249(1), 50-57.   DOI
6 Pedersen, P. (1977), "Influence of boundary conditions on the stability of a column under non-conservative load", Int. J. Solid. Struct., 13(5), 445-455.   DOI
7 Pilkey, W.D. (1994), Formulas for Stress, Strain, and Structural Matrices, John Wiley & Sons, Inc.
8 Shaat, M. and Mahmoud, F.F. (2015), "A new Mindlin FG plate model incorporating microstructure and surface energy effects", Struct. Eng. Mech., 53(1), 105-130.   DOI
9 Shenoy, V.B. (2005), "Atomistic calculations of elastic properties of metallic fcc crystal surfaces", Phys. Rev. B, 71(9), 094104.   DOI
10 Shi, M.X., Liu, B., Zhang, Z.Q., Zhang, Y.W. and Gao, H.J. (2012), "Direct influence of residual stress on the bending stiffness of cantilever beams", Proc. R. Soc. A, 468(2145), 2595-2613.   DOI
11 Sundararajan, C. (1976), "Influence of an elastic end support on the vibration and stability of Beck's column", Int. J. Mech. Sci., 18(5), 239-241.   DOI
12 Wang, G.F. and Feng, X.Q. (2007), "Effects of surface elasticity and residual surface tension on the natural frequency of microbeams", Appl. Phys. Lett., 90(23), 231904.   DOI
13 Zhu, J., Yang, J.S. and Ru, C.Q. (2014), "Buckling of an elastic plate due to surface-attached thin films with intrinsic stresses", Struct. Eng. Mech., 52(1), 89-95.   DOI
14 Xiang, Y., Wang, C.M., Kitipornchai, S. and Wang, Q. (2010), "Dynamic instability of nanorods/nanotubes subjected to an end follower force", J. Eng. Mech., 136(8), 1054-1058.   DOI
15 Yao, H., Yun, G., Bai, N. and Li, J. (2012), "Surface elasticity effect on the size-dependent elastic property of nanowires", J. Appl. Phys., 111(8), 083506.   DOI
16 Zang, X., Zhou, Q., Chang, J., Liu, Y. and Lin, L. (2015), "Graphene and carbon nanotube (CNT) in MEMS/NEMS applications", Microelectron. Eng., 132, 192-206.   DOI
17 Zhang, Y.Q., Pang, M. and Chen, W.Q. (2015), "Transverse vibrations of embedded nanowires under axial compression with high-order surface stress effects", Physica E, 66, 238-244.   DOI
18 Zheng, X.P., Cao, Y.P., Li, B., Feng, X.Q. and Wang, G.F. (2010), "Surface effects in various bending-based test methods for measuring the elastic property of nanowires", Nanotechnol., 21(20), 205702.   DOI
19 Akgoz, B. and Civalek, O. (2015), "Bending analysis of FG microbeams resting on Winkler elastic foundation via strain gradient elasticity", Compos. Struct., 134, 294-301.   DOI
20 Ansari, R., Gholami, R. and Sahmani, S. (2013), "Size-dependent vibration of functionally graded curved microbeams based on the modified strain gradient elasticity theory", Arch. Appl. Mech., 83(10), 1439-1449.   DOI
21 Choi, J., Cho, M. and Kim, W. (2010), "Surface effects on the dynamic behavior of nanosized thin film resonator", Appl. Phys. Lett., 97(97), 171901.   DOI
22 Asthana, A., Momeni, K., Prasad, A., Yap, Y.K. and Yassar, R.S. (2011), "In situ observation of size-scale effects on the mechanical properties of ZnO nanowires", Nanotechnol., 22(26), 265712.   DOI
23 Chen, Y.Z. (2003), "Interaction between compressive force and vibration frequency for a varying cross-section cantilever under action of generalized follower force", J. Sound Vib., 259(4), 991-999.   DOI
24 Cheng, C.H. and Chen, T. (2015), "Size-dependent resonance and buckling behavior of nanoplates with high-order surface stress effects", Physica E, 67, 12-17.   DOI
25 Elishakoff, I. (2005), "Controversy associated with the so-called "follower forces": Critical overview", Appl. Mech. Rev., 58(2), 117-142.   DOI
26 Civalek, O. and Demir, C. (2016), "A simple mathematical model of microtubules surrounded by an elastic matrix by nonlocal finite element method", Appl. Math. Comput., 289, 335-352.
27 Cuenot, S., Fretigny, C., Demoustier-Champagne, S. and Nysten, B. (2004), "Surface tension effect on the mechanical properties of nanomaterials measured by atomic force microscopy", Phys. Rev. B, 69(16), 165410.   DOI
28 Ebrahimi, F., Shaghaghi, G.R. and Boreiry, M. (2016), "An investigation into the influence of thermal loading and surface effects on mechanical characteristics of nanotubes", Struct. Eng. Mech., 57(1), 179-200.   DOI
29 Gurtin, M.E. and Murdoch, A.I. (1975), "A continuum theory of elastic material surfaces", Arch. Ration. Mech. Anal., 57(4), 291-323.   DOI
30 Gurtin, M.E. and Murdoch, A.I. (1978), "Surface stress in solids", Int. J. Solid. Struct., 14(6), 431-440.   DOI
31 Hasheminejad, B.S.M., Gheshlaghi, B., Mirzaei, Y. and Abbasion, S. (2011), "Free transverse vibrations of cracked nanobeams with surface effects", Thin Solid Film., 519(8), 2477-2482.   DOI
32 Ibach, H. (1997), "The role of surface stress in reconstruction, epitaxial growth and stabilization of mesoscopic structures", Surf. Sci. Rep., 29(5-6), 195-263.   DOI
33 Jing, G.Y., Duan, H.L., Sun, X.M., Zhang, Z.S., Xu, J., Li, Y.D., Wang, J.X. and Yu, D.P. (2006), "Surface effects on elastic properties of silver nanowires: Contact atomic-force microscopy", Phys. Rev. B, 73(23), 235409.   DOI
34 Lachut, M.J. and Sader, J.E. (2007), "Effect of surface stress on the stiffness of cantilever plates", Phys. Rev. Lett., 99(20), 206102.   DOI
35 Li, X.F., Jiang, S.N. and Lee, K.Y. (2016b), "Surface effect on dynamic stability of microcantilevers on an elastic foundation under a subtangential follower force", Int. J. Mech. Mater. Des., doi:10.1007/s10999-016-9362-1.   DOI
36 Wang, J., Huang, Z., Duan, H., Yu, S., Feng, X., Wang, G., Zhang, W. and Wang, T. (2011), "Surface stress effect in mechanics of nanostructured materials", Acta Mech. Solida Sin., 24(1), 52-82.   DOI
37 Wang, K. and Wang, B. (2015), "Timoshenko beam model for the vibration analysis of a cracked nanobeam with surface energy", J. Vib. Control, 21(12), 2452-2464.   DOI
38 Langthjem, M.A. and Sugiyama, Y. (2000), "Dynamic stability of columns subjected to follower loads: A survey", J. Sound Vib., 238(5), 809-851.   DOI
39 Leung, A.Y.T. (2008), "Exact spectral elements for follower tension buckling by power series", J. Sound Vib., 309(3-5), 718-729.   DOI
40 Li, L., Li, X. and Hu, Y. (2016a), "Free vibration analysis of nonlocal strain gradient beams made of functionally graded material", Int. J. Eng. Sci., 102, 77-92.   DOI
41 Li, X.F., Wang, B.L., Tang, G.J. and Lee, K.Y. (2011), "Size effect in transverse mechanical behavior of one-dimensional nanostructures", Physica E, 44(1), 207-214.   DOI
42 Li, X.F., Zhang, H. and Lee, K.Y. (2014), "Dependence of Young's modulus of nanowires on surface effect", Int. J. Mech. Sci., 81, 120-125.   DOI
43 Li, X.F., Zou, J., Jiang, S.N. and Lee, K.Y. (2016c), "Resonant frequency and flutter instability of a nanocantilever with the surface effects", Compos. Struct., 153, 645-653.   DOI
44 Mercan, K. and Civalek, O. (2016), "Dsc method for buckling analysis of boron nitride nanotube (BNNT) surrounded by an elastic matrix", Compos. Struct., 143, 300-309.   DOI
45 Mercan, K. and Civalek, O. (2017), "Buckling analysis of Silicon carbide nanotubes (SiCNTs) with surface effect and nonlocal elasticity using the method of HDQ", Compos. Part B, 114, 34-45.   DOI
46 Moon, W. and Hwang, H. (2008), "Atomistic study of structures and elastic properties of single crystalline ZnO nanotubes", Nanotechnol., 19(22), 225703.   DOI