1 |
Abdel-Rahman, E.M., Younis, M.I. and Nayfeh, A.H. (2002), "Characterization of the mechanical behavior of an electrically actuated microbeam", Micromech. Microeng., 12(6), 759-766.
DOI
|
2 |
Aboelkassem, Y., Nayfeh, A.H. and Ghommem, M. (2010), "Biomass sensor using an electrostatically actuated microcantilever in a vacuum microchannel", Microsyst. Technol., 16(10), 1749-1755.
DOI
|
3 |
Bataineh, A.M. and Younis, M.I. 2015, "Dynamics of a clampedclamped microbeam resonator considering fabrication imperfections", Microsyst. Technol., 21(11), 2425-2434.
DOI
|
4 |
Beeby, S., Ensell, G., Kraft, M. and White, N. (2004), MEMS Mechanical Sensors, Artech House, Inc, Boston, London.
|
5 |
Boudjiet, M.T., Bertrand, J., Mathieu, F., Nicu, L., Mazenq, L., Leichle, T., Heinrich, S. M., Pellet, C. and Dufour, I. (2015), "Geometry optimization of uncoated silicon microcantileverbased gas density sensors", Sens. Actuat. B: Chem., 208, 600-607
DOI
|
6 |
Chaterjee, S. and Pohit, G.A. (2009), "Large deflection model for the pull-in analysis of electrostatically actuated microcantilever beams", J. Sound Vib., 322(4-5), 969-986.
DOI
|
7 |
Chitsaz Yazdi, F. and Jalali, A. (2015), "Vibration behavior of a viscoelastic composite microbeam under simultaneous electrostatic and piezoelectric actuation", Mech. Time-Depend. Mater., 19(3), 277-304.
|
8 |
Dufour, I., Lochon, F., Heinrich, S.M., Josse, F. and Rebiere, D. (2007), "Effect of coating viscoelasticity on quality factor and limit of detection of microcantilever chemical sensors", Sens. J., 7(2), 230-236.
DOI
|
9 |
Fu, Y.M., Zhang, J. and Bi, R.G. (2009), "Analysis of the nonlinear dynamic stability for an electrically actuated viscoelastic microbeam", Microsyst. Technol., 15(5), 763-769.
DOI
|
10 |
Ghayesh, M.H., Farokhi, H. and Alici, G. (2015), "Size-dependent electro-elasto-mechanics of MEMS with initially curved deformable electrodes", Int. J. Mech. Sci., 103, 247-264.
DOI
|
11 |
Hoseini, S.M., Shooshtari, A., Kalhori, H. and Mahmoodi, S.M. (2014), "Nonlinear-forced vibrations of piezoelectrically actuated viscoelastic cantilevers", Nonlin. Dyn., 78(1), 571-583.
DOI
|
12 |
Huang, Y.T., Chen, H.L. and Hsu, W. (2014), "An analytical model for calculating the pull-in voltage of micro cantilever beams subjected to tilted and curled effects", Microelec. Eng., 125, 73-77.
DOI
|
13 |
Kim, I.K. and Lee, S.I. (2015), "Nonlinear resonances of a singlewall carbon nanotube cantilever", Physica E: Low-dimens. Syst. Nanostruct., 67, 159-167.
DOI
|
14 |
Lizhoung, X. and Xiaoli, J. (2007), "Electromechanical coupled nonlinear dynamics for microbeams", Arch. Appl. Mech., 77(7), 485-502.
DOI
|
15 |
Mahmoodi, S.N., Afshari, M. and Jalili, N. (2008), "Nonlinear vibrations of piezoelectric microcantilevers for biologicallyinduced surface stress sensing", Commun. Nonlin. Sci. Numer. Simul., 13(9), 1964-1977.
DOI
|
16 |
Mahmoodi, S.N., Khadem, S.E. and Kokabi, M. (2007), "Nonlinear free vibrations of Kelvin-Voigt visco-elastic beams", Int. J. Mech. Sci., 49(6), 722-732.
DOI
|
17 |
Masri, K.M. and Younis, M.I. (2015), "Investigation of the dynamics of a clamped-clamped microbeam near symmetric higher order modes using partial electrodes", Int. J. Dyn. Control, 3(2), 173-182.
DOI
|
18 |
Najar, F., El-Borgi, S., Reddy, J.N. and Mrabet, K. (2015), "Nonlinear nonlocal analysis of electrostatic nanoactuators", Compos. Struct., 120, 117-128.
DOI
|
19 |
Nayfeh, A.H. and Pai, P.F. (2004), Linear and Nonlinear Structural Mechanics, Wiley, New York.
|
20 |
Nayfeh, A.H. and Younis, M.I. (2005), "Dynamics of MEMS resonators under superharmonic and subharmonic excitations", Micromech. Microeng., 15(10), 1840-1847.
DOI
|
21 |
Nayfeh, A.H., Younis, M.I. and Abdel-Rahman, E.M. (2007), "Dynamic pull-in phenomenon in MEMS resonators", Nonlin. Dyn., 48(1), 153-163.
DOI
|
22 |
Nie, M., Huang, Q. and Li, W. (2006), "Measurement of material properties of individual layers for composite films by a pull-in method", J. Phys. Conf. Ser., 34(34), 516-521.
DOI
|
23 |
Poloei, E., Zamanian, M. and Hosseini, S.A.A. (2015), "Static deflection and natural frequency analysis of two-layered electrostatically actuated microcantilever for finding the optimum configuration", Mod. Mech. Eng., 15(5), 245-253.
|
24 |
Raeisifard, H., Zamanian, M., Nikkhah Bahrami, M., Yousefi-Koma, A. and Raeisi Fard, H. (2014), "On the nonlinear primary resonances of a piezoelectric laminated micro system under electrostatic control voltage", J. Sound Vib., 333(21), 5494-5510.
DOI
|
25 |
Rahaeifard, M. and Ahmadian, M.T. (2015), "On pull-in instabilities of microcantilevers", Int. J. Eng. Sci., 87, 23-31.
DOI
|
26 |
Rasekh, M. and Khadem, S.E. (2011), "Pull-in analysis of an electrostatically actuated nano-cantilever beam with nonlinearity in curvature and inertia", Int. J. Mech. Sci., 53(2), 108-115.
DOI
|
27 |
Rasekh, M. and Khadem, S.E. (2013), "Design and performance analysis of a nanogyroscope based on electrostatic actuation and capacitive sensing", J. Sound Vib., 332(23), 6155-6168.
DOI
|
28 |
Rezazadeh, G. (2008), "A comprehensive model to study nonlinear behavior of multilayered micro beam switches", Microsyst. Technol., 14(1), 135-141.
DOI
|
29 |
Shooshtari, A., Hoseini, S.M., Mahmoodi, S.N. and Kalhori, H. (2012), "Analytical solution for nonlinear free vibrations of viscoelastic microcantilevers covered with a piezoelectric layer", Smart Mater. Struct., 21(7), 75015- 75025.
DOI
|
30 |
Rezazadeh, G., Keyvani, A. and Jafarmadar, S. (2012), "On a MEMS based dynamic remote temperature sensor using transverse vibration of a bi-layer micro-cantilever", Measur., 45(3), 580-589.
DOI
|
31 |
Sun, W., Sun, Y., Yu, Y. and Zheng, S. (2016), "Nonlinear vibration analysis of a type of tapered cantilever beams by using an analytical approximate method", Struct. Eng. Mech., 59(1), 1-14.
DOI
|
32 |
Wang, K.F. and Wang, B.L. (2015), "A general model for nano-cantilever switches with consideration of surface effects and nonlinear curvature", Physica E: Low-dimens. Syst. Nanostruct., 66, 197-208.
DOI
|
33 |
Yang, W.D. and Wang, X. (2016), "Nonlinear pull-in instability of carbon nanotubes reinforced nano-actuator with thermally corrected Casimir force and surface effect", Int. J. Mech. Sci., 107, 34-42.
DOI
|
34 |
Younis, M. I. (2011), MEMS Linear and Nonlinear Statics and Dynamics, Springer US, New York.
|
35 |
Younis, M.I. (2015), "Multi-mode excitation of a clampedclamped microbeam resonator", Nonlin. Dyn., 80(3), 1531-1541.
DOI
|
36 |
Younis, M.I. and Alsaleem, F. (2009), "Exploration of new concepts for mass detection in electrostatically-actuated structures based on nonlinear phenomena", J. Comput. Nonlin. Dyn., 4(2), 021010-021025.
DOI
|
37 |
Younis, M.I. and Nayfeh, A.H. (2003), "A Study of the nonlinear response of a resonant microbeam to an electric actuation", Nonlin. Dyn., 3(1), 91-117.
|
38 |
Zamanian, M., Khadem, S.E. and Mahmoodi, S.N. (2010), "Nonlinear response of a resonant viscoelastic microbeam under an electrical actuation", Struct. Eng. Mech., 35(4), 387-407.
DOI
|
39 |
Zamanian, M. and Karimiyan, A. (2015), "Analysis of the mechanical behavior of a doubled microbeam configuration under electrostatic actuation", Int. J. Mech. Sci., 93, 82-92.
DOI
|
40 |
Zamanian, M. and Khadem, S.E. (2010), "Nonlinear vibration of an electrically actuated microresonator tuned by combined DC piezoelectric and electric", Smart Mater. Struct., 19(1), 15012-15031.
DOI
|