[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.12989/sem.2016.60.4.547

A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate

Tounsi, Abdelouahed (Material and Hydrology Laboratory, Faculty of Technology, Civil Engineering Department, University of Sidi Bel Abbes)
Houari, Mohammed Sid Ahmed (Material and Hydrology Laboratory, Faculty of Technology, Civil Engineering Department, University of Sidi Bel Abbes)
Bessaim, Aicha (Material and Hydrology Laboratory, Faculty of Technology, Civil Engineering Department, University of Sidi Bel Abbes)

Publication Information

Structural Engineering and Mechanics / v.60, no.4, 2016 , pp. 547-565 More about this Journal

Abstract

In this work a new 3-unknown non-polynomial shear deformation theory for the buckling and vibration analyses of functionally graded material (FGM) sandwich plates is presented. The present theory accounts for non-linear in plane displacement and constant transverse displacement through the plate thickness, complies with plate surface boundary conditions, and in this manner a shear correction factor is not required. The main advantage of this theory is that, in addition to including the shear deformation effect, the displacement field is modelled with only 3 unknowns as the case of the classical plate theory (CPT) and which is even less than the first order shear deformation theory (FSDT). The plate properties are assumed to vary according to a power law distribution of the volume fraction of the constituents. Equations of motion are derived from the Hamilton's principle. Analytical solutions of natural frequency and critical buckling load for functionally graded sandwich plates are obtained using the Navier solution. The results obtained for plate with various thickness ratios using the present non-polynomial plate theory are not only substantially more accurate than those obtained using the classical plate theory, but are almost comparable to those obtained using higher order theories with more number of unknown functions.

Keywords

sandwich plate; functionally graded material; vibration; buckling; a non-polynomial 3-unknown theory;

Citations & Related Records

Times Cited By KSCI : 30 (Citation Analysis)

Reference
Cited By KSCI

1	Bounouara, F., Benrahou, K.H., Belkorissat, I. and Tounsi, A. (2016), "A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation", Steel Compos. Struct., 20(2), 227-249. DOI
2	Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), "A new simple shear and normal deformations theory for functionally graded beams", Steel Compos. Struct., 18(2), 409-423. DOI
3	Bourada, M., Tounsi, A. and Houari, M.S.A. (2012), "A new four-variable refined plate theory for thermal buckling analysis of functionally graded sandwich plates", J. Sandw. Struct. Mater., 14 (1), 5-33. DOI
4	Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2014), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", Int. J. Comput. Meth., 11(6), 1350082. DOI
5	Chikh, A., Bakora, A., Heireche, H., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2016), "Thermomechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory", Struct. Eng. Mech., 57(4), 617-639. DOI
6	Draiche, K., Tounsi, A. and Khalfi, Y. (2014), "A trigonometric four variable plate theory for free vibration of rectangular composite plates with patch mass", Steel Compos. Struct., 17(1), 69-81. DOI
7	Ebrahimi, F. and Dashti, S. (2015), "Free vibration analysis of a rotating non-uniform functionally graded beam", Steel Compos. Struct., 19(5), 1279-1298. DOI
8	El-Hassar, S.M., Benyoucef, S., Heireche, H. and Tounsi, A. (2016), "Thermal stability analysis of solar functionally graded plates on elastic foundation using an efficient hyperbolic shear deformation theory", Geomech. Eng., 10(3), 357-386. DOI
9	Etemadi, E., Khatibi, A.A. and Takaffoli, M. (2009), "3D finite element simulation of sandwich panels with a functionally graded core subjected to low velocity impact", Compos Struct, 89, 28-34. DOI
10	El Meiche, N., Tounsi, A., Ziane, N. and Adda Bedia, E.A. (2011), "A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate", Int. J. Mech. Sci., 53(4), 237-247. DOI
11	Hadji, L., Ait Atmane, H., Tounsi, A. and Adda Bedia, E.A. (2011), "Free vibration of functionally graded sandwich plates using four-variable refined plate theory", Appl. Math. Mech., 32(7), 925-942. DOI
12	Hadji, L., Hassaine Daouadji, T., Tounsi, A. and Adda Bedia, A. (2015), "A n-order refined theory for bending and free vibration of functionally graded beams", Struct. Eng. Mech., 54(5), 923-936. DOI
13	Kar, V.R. and Panda, S.K. (2015), "Nonlinear flexural vibration of shear deformable functionally graded spherical shell panel", Steel Compos. Struct., 18(3), 693-709. DOI
14	Hamidi, A., Houari, M.S.A., Mahmoud, S.R. and Tounsi, A. (2015), "A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates", Steel Compos. Struct., 18(1), 235-253. DOI
15	Hebali, H., Tounsi, A., Houari, M.S.A., Bessaim, A. and Adda Bedia, E.A. (2014), "New quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", J. Eng. Mech., ASCE, 140, 374-383. DOI
16	Houari, A.M.S., Benyoucef, S., Tounsi, A. and Adda Bedia, E.A. (2011), "Two-variable refined plate theory for thermoelastic bending analysis of functionally graded sandwich plates", J. Therm. Stress., 34(4), 315-334. DOI
17	Kettaf, F.Z., Houari, M.S.A., Benguediab, M. and Tounsi, A. (2013), "Thermal buckling of functionally graded sandwich plates using a new hyperbolic shear displacement model", Steel Compos. Struct., 15(4), 399-423. DOI
18	Li, Q., Iu, V.P., and Kou, K.P. (2008), "Three-dimensional vibration analysis of functionally graded material sandwich plates", J. Sound Vib., 311, 498-515. DOI
19	Koizumi, M. (1993), "The concept of FGM", Ceram. Tran. Function. Grad. Mater., 34, 3-10.
20	Larbi Chaht, F., Kaci, A., Houari, M.S.A., Tounsi, A., Anwar Beg, O. and Mahmoud, S.R. (2015), "Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect", Steel Compos. Struct., 18(2), 425-442. DOI
21	Natarajan, S. and Ganapathi, M. (2012), "Bending and vibration of functionally graded material sandwich plates using an accurate theory", Finite Elem. Anal. Des., 57, 32-42. DOI
22	Mahi, A., Adda Bedia, E.A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39, 2489-2508. DOI
23	Majumdar, A. and Das, D. (2016), "A study on thermal buckling load of clamped functionally graded beams under linear and nonlinear thermal gradient across thickness", J Mater. Des. Appl., doi:10.1177/1464420716649213. DOI
24	Meradjah, M., Kaci, A., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2015), "A new higher order shear and normal deformation theory for functionally graded beams", Steel Compos. Struct., 18(3), 793-809. DOI
25	Nedri, K., El Meiche, N. and Tounsi, A. (2014), "Free vibration analysis of laminated composite plates resting on elastic foundations by using a refined hyperbolic shear deformation theory", Mech. Compos. Mater., 49(6), 629-640. DOI
26	Nguyen, K.T., Thai, T.H. and Vo, T.P. (2015), "A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates", Steel Compos. Struct., 18(1), 91-120. DOI
27	Reddy, J.N. (1984), "A simple higher order shear deformation theory for laminated composite plates", J. Appl. Mech., 51, 754-752.
28	Ould Larbi, L, Kaci, A., Houari, M.S.A. and Tounsi, A. (2013), "An efficient shear deformation beam theory based on neutral surface position for bending and free vibration of functionally graded beams", Mech. Base. Des. Struct. Mach., 41(4), 421-433. DOI
29	Pradhan, K.K. and Chakraverty, S. (2015), "Free vibration of functionally graded thin elliptic plates with various edge supports", Struct. Eng. Mech., 53(2), 337-354. DOI
30	Reddy, J. (2000), "Analysis of functionally graded plates", Int. J. Numer. Meth. Eng., 47, 663-684. DOI
31	Sallai, B., Hadji, L., Hassaine Daouadji, T. and Adda Bedia, E.A. (2015), "Analytical solution for bending analysis of functionally graded beam", Steel Compos. Struct., 19(4), 829-841. DOI
32	Sobhy, M. (2013), "Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions", Compos. Struct., 99, 76-87. DOI
33	Soldatos, K.P. (1992), "A transverse shear deformation theory for homogeneous monoclinic plates", Acta Mech, 94, 195-220. DOI
34	Tebboune, W., Benrahou, K.H., Houari, M.S.A. and Tounsi, A. (2015), "Thermal buckling analysis of FG plates resting on elastic foundation based on an efficient and simple trigonometric shear deformation theory", Steel Compos. Struct., 18(2), 443-465. DOI
35	Tounsi, A., Houari, M.S.A., Benyoucef, S. and Adda Bedia, E.A, (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aero. Sci. Technol., 24 (1), 209-220. DOI
36	Touratier, M. (1991), "An efficient standard plate theory", Int. J. Eng. Sci., 29(8), 901-916. DOI
37	Abdelaziz, H.H., Ait Atmane, H., Boumia, L., Tounsi, A. and Adda Bedia, E.A. (2011), "Static analysis of functionally graded sandwich plates using an efficient and simple refined theory", Chin. J. Aeronaut., 24(4), 434-448. DOI
38	Xiang, S., Kang, G.W., Yang, M.S. and Zhao, Y. (2013), "Natural frequencies of sandwich plate with functionally graded face and homogeneous core", Compos. Struct., 96, 226-231. DOI
39	Yaghoobi, H. and Yaghoobi, P. (2013), "Buckling analysis of sandwich plates with FGM face sheets resting on elastic foundation with various boundary conditions: An analytical approach", Meccanica, 48, 2019-2035. DOI
40	Zidi, M., Tounsi, A., Houari, M.S.A., Adda Bedia, E.A. and Anwar Beg, O. (2014), "Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory", Aerosp. Sci. Technol., 34, 24-34. DOI
41	Abdelbari, S., Fekrar, A., Heireche, H., Saidi, H., Tounsi, A. and Adda Bedia, E.A. (2016), "An efficient and simple shear deformation theory for free vibration of functionally graded rectangular plates on Winkler-Pasternak elastic foundations", Wind Struct., 22(3), 329-348. DOI
42	Ahouel, M., Houari, M.S.A., Adda Bedia, E.A. and Tounsi, A. (2016), "Size-dependent mechanical behavior of functionally graded trigonometric shear deformable nanobeams including neutral surface position concept", Steel Compos. Struct., 20(5), 963-981. DOI
43	Ait Amar Meziane, M., Abdelaziz, H.H. and Tounsi, A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318. DOI
44	Ait Atmane, H., Tounsi, A., Bernard, F. and Mahmoud, S.R. (2015), "A computational shear displacement model for vibrational analysis of functionally graded beams with porosities", Steel Compos. Struct., 19(2), 369-384. DOI
45	Attia, A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2015), "Free vibration analysis of functionally graded plates with temperature-dependent properties using various four variable refined plate theories", Steel Compos. Struct., 18(1), 187-212. DOI
46	Ait Yahia, S., Ait Atmane, H., Houari, M.S.A. and Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., 53(6), 1143-1165. DOI
47	Akavci, S.S. (2016), "Mechanical behavior of functionally graded sandwich plates on elastic foundation", Compos. Part B, 96, 136-152. DOI
48	Akvaci, S.S. (2014), "An efficient shear deformation theory for free vibration of functionally graded thick rectangular plates on elastic foundation", Compos. Struct., 108, 667-676. DOI
49	Al-Basyouni, K.S., Tounsi, A. and Mahmoud, S.R. (2015), "Size dependent bending and vibration analysis of functionally graded micro beams based on modified couple stress theory and neutral surface position", Compos. Struct., 125, 621-630. DOI
50	Anderson, T.A. (2003), "A 3-D elasticity solution for a sandwich composite with functionally graded core subjected to transverse loading by a rigid sphere", Compos. Struct., 60, 265-274. DOI
51	Bachir Bouiadjra, R., Adda Bedia, E.A. and Tounsi, A. (2013), "Nonlinear thermal buckling behavior of functionally graded plates using an efficient sinusoidal shear deformation theory", Struct. Eng. Mech., 48(4), 547-567. DOI
52	Bellifa, H., Benrahou, K.H., Hadji, L., Houari, M.S.A. and Tounsi, A. (2016), "Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position", J Braz. Soc. Mech. Sci. Eng., 38, 265-275. DOI
53	Baseri, V., Jafari, G.S. and Kolahchi, R. (2016), "Analytical solution for buckling of embedded laminated plates based on higher order shear deformation plate theory", Steel Compos. Struct., 21(4), 883-919. DOI
54	Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Anwar Beg, O. (2014), "An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates", Compos. Part B, 60, 274-283. DOI
55	Belkorissat, I., Houari, M.S.A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2015), "On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model", Steel Compos. Struct., 18(4), 1063-1081. DOI
56	Benselama, K., El Meiche, N., Adda Bedia, E.A. and Tounsi, A. (2015), "Buckling analysis in hybrid crossply composite laminates on elastic foundation using the two variable refined plate theory", Struct. Eng. Mech., 55(1), 47-64. DOI
57	Benachour, A., Daouadji, H.T., Ait Atmane, H., Tounsi, A. and Meftah, S.A. (2011), "A four variable refined plate theory for free vibrations of functionally graded plates with arbitrary gradient", Compos. Part B, 42(6), 1386-1394. DOI
58	Bennai, R., Ait Atmane, H. and Tounsi, A. (2015), "A new higher-order shear and normal deformation theory for functionally graded sandwich beams", Steel Compos. Struct., 19(3), 521-546. DOI
59	Bennoun, M., Houari, M.S.A. and Tounsi, A. (2016), "A novel five variable refined plate theory for vibration analysis of functionally graded sandwich plates", Mech. Adv. Mater. Struct., 23(4), 423-431. DOI
60	Bouchafa, A., Bachir Bouiadjra, M., Houari, M.S.A. and Tounsi, A. (2015), "Thermal stresses and deflections of functionally graded sandwich plates using a new refined hyperbolic shear deformation theory", Steel Compos. Struct., 18(6), 1493-1515. DOI
61	Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013) "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., 14(1), 85-104. DOI
62	Bouderba, B., Houari, M.S.A. and Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422. DOI
63	Boukhari, A., Ait Atmane, H., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2016), "An efficient shear deformation theory for wave propagation of functionally graded material plates", Struct. Eng. Mech., 57(5), 837-859. DOI

	Farzad Ebrahimi. (2017) Journal of Vibration and Control Wave propagation analysis of size-dependent rotating inhomogeneous nanobeams based on nonlocal elasticity theory / , 107754631771153
	Hamed Pakdel. (2017) Theoretical and Applied Fracture Mechanics Experimental observation and energy based analytical investigation of matrix cracking distribution pattern in angle-ply laminates / 92 , 146
6	K. Kiani. (2017) Acta Physica Polonica A Nonlocal Timoshenko Beam for Vibrations of Magnetically Affected Inclined Single-Walled Carbon Nanotubes as Nanofluidic Conveyors / 131 (6) , 1439
	Davood Shahsavari. (2018) European Journal of Mechanics - A/Solids Shear buckling of single layer graphene sheets in hygrothermal environment resting on elastic foundation based on different nonlocal strain gradient theories / 67 , 200
5	Elyas Shivanian. (2017) Applied Physics A Influence of size effect on flapwise vibration behavior of rotary microbeam and its analysis through spectral meshless radial point interpolation / 123 (5)
	Jianguo Ding. (2018) Mechanics Based Design of Structures and Machines Nonlinear vibration analysis of functionally graded beams considering the influences of the rotary inertia of the cross section and neutral surface position / , 1
	Mohammad Reza Barati. (2017) Composite Structures A general bi-Helmholtz nonlocal strain-gradient elasticity for wave propagation in nanoporous graded double-nanobeam systems on elastic substrate / 168 , 885
4	A. Mirafzal. (2017) Applied Physics A Dynamic characteristics of temperature-dependent viscoelastic FG nanobeams subjected to 2D-magnetic field under periodic loading / 123 (4)
	Ankit Gupta. (2017) Composites Part B: Engineering Nonlinear flexural and vibration response of geometrically imperfect gradient plates using hyperbolic higher-order shear and normal deformation theory / 123 , 241
	Peng Hao. (2017) Composite Structures Buckling optimization of variable-stiffness composite panels based on flow field function / 181 , 240
	Fahimeh Mehralian. (2017) Physica B: Condensed Matter Nonlocal strain gradient theory calibration using molecular dynamics simulation based on small scale vibration of nanotubes / 514 , 61
3	Yaghoub Tadi Beni. (2017) Journal of Low Frequency Noise, Vibration and Active Control Free vibration of anisotropic single-walled carbon nanotube based on couple stress theory for different chirality / 36 (3) , 277
	Sid Ahmed Belalia. (2017) Journal of Sandwich Structures & Materials Investigation of the mechanical properties on the large amplitude free vibrations of the functionally graded material sandwich plates / , 109963621770129
	Farzad Ebrahimi. (2017) Microsystem Technologies Damping vibration behavior of visco-elastically coupled double-layered graphene sheets based on nonlocal strain gradient theory /
	S. A. Belalia. (2018) Mechanics of Advanced Materials and Structures A curved hierarchical finite element method for the nonlinear vibration analysis of functionally graded sandwich elliptic plates / , 1
3	Ali Jamalpoor. (2017) Applied Physics A Vibration analysis of bonded double-FGM viscoelastic nanoplate systems based on a modified strain gradient theory incorporating surface effects / 123 (3)
5	M. Arefi. (2017) Applied Physics A Application of nonlocal strain gradient theory and various shear deformation theories to nonlinear vibration analysis of sandwich nano-beam with FG-CNTRCs face-sheets in electro-thermal environment / 123 (5)
	M. Mohammadimehr. (2017) International Journal of Smart and Nano Materials Bending, buckling and vibration analyses of MSGT microcomposite circular-annular sandwich plate under hydro-thermo-magneto-mechanical loadings using DQM / , 1
	Kai Zhang. (2017) Composites Part B: Engineering Homogenization of hexagonal and re-entrant hexagonal structures and wave propagation of the sandwich plates with symplectic analysis / 114 , 80
6	A. Chemi. (2018) Mechanics of Composite Materials Critical Buckling Load of Chiral Double-Walled Carbon Nanotubes Embedded in an Elastic Medium / 53 (6) , 827
4	Boumediene Kheroubi. (2016) Advances in nano research A new refined nonlocal beam theory accounting for effect of thickness stretching in nanoscale beams / 4 (4) , 251
	Navvab Shafiei. (2017) Computer Methods in Applied Mechanics and Engineering Vibration of two-dimensional imperfect functionally graded (2D-FG) porous nano-/micro-beams / 322 , 615
	Kundan Kumar. (2017) Nuclear Engineering and Design Miniature test techniques for life management of operating equipment / 323 , 345
4	Farzad Ebrahimi. (2016) Advances in materials Research Thermal buckling of FGM nanoplates subjected to linear and nonlinear varying loads on Pasternak foundation / 5 (4) , 245
3	Habib Hebali. (2016) Steel and Composite Structures A novel four variable refined plate theory for bending, buckling, and vibration of functionally graded plates / 22 (3) , 473
3	Misagh Zarepour. (2017) Applied Physics A Free vibration investigation of nano mass sensor using differential transformation method / 123 (3)
	Rafik Meksi. (2017) Journal of Sandwich Structures & Materials An analytical solution for bending, buckling and vibration responses of FGM sandwich plates / , 109963621769844
	Jung Woo Lee. (2017) International Journal of Mechanical Sciences Free vibration analysis of functionally graded Bernoulli-Euler beams using an exact transfer matrix expression / 122 , 1
	Peng Hao. (2017) Composite Structures Isogeometric buckling analysis of composite variable-stiffness panels / 165 , 192
	Qiliang Lin. (2017) Engineering Structures Experimental and theoretical investigation of the thermo-mechanical deformation of a functionally graded panel / 138 , 17
	S. A. Belalia. (2017) Mechanics of Advanced Materials and Structures A new analysis of nonlinear free vibration behavior of bi-functionally graded sandwich plates using the p-version of the finite element method / , 1
4	Vishesh R. Kar. (2016) Advances in materials Research Thermal buckling behaviour of shear deformable functionally graded single/doubly curved shell panel with TD and TID properties / 5 (4) , 205
4	S. M. Aldousari. (2017) Applied Physics A Bending analysis of different material distributions of functionally graded beam / 123 (4)
	Nam-Il Kim. (2017) Composites Part B: Engineering Exact solutions for coupled responses of thin-walled FG sandwich beams with non-symmetric cross-sections / 122 , 121
	Yang Zhong. (2017) Mathematical Problems in Engineering Analysis Bending Solutions of Clamped Rectangular Thick Plate / 2017 , 1
None	(2016) The open civil engineering journal Finite Element Method of Composite Steel-Concrete Beams Considering Interface Slip and Uplift / 11 (None) , 531
1661-9897	(2018) Journal of Nano Research Thermal and Small-Scale Effects on Vibration of Embedded Armchair Single-Walled Carbon Nanotubes / 51 (1661-9897) , 24
8	(2018) Journal of Thermal Stresses Thermodynamic effect on the bending response of elastic foundation FG plate by using a novel four variable refined plate theory / 41 (8) , 1042
3	(2016) Advances in materials research : AMR An analytical approach for buckling of functionally graded plates / 5 (3) , 141
5	(2016) Steel & Composite structures : an international journal A new five unknown quasi-3D type HSDT for thermomechanical bending analysis of FGM sandwich plates / 22 (5) , 975
1	(2016) Geomechanics & engineering A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation / 12 (1) , 9
3	(2016) Steel & Composite structures : an international journal A non-polynomial four variable refined plate theory for free vibration of functionally graded thick rectangular plates on elastic foundation / 23 (3) , 317
1	(2016) Advances in materials research : AMR Static deflection and dynamic behavior of higher-order hyperbolic shear deformable compositionally graded beams / 6 (1) , 13
1	(2017) Advances in materials research : AMR Bending and stability analysis of size-dependent compositionally graded Timoshenko nanobeams with porosities / 6 (1) , 45
3	(2016) Smart structures and systems Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT / 19 (3) , 289
2	(2016) Structural engineering and mechanics : An international journal Wave propagation in functionally graded beams using various higher-order shear deformation beams theories / 62 (2) , 143
4	(2017) Structural engineering and mechanics : An international journal A novel and simple HSDT for thermal buckling response of functionally graded sandwich plates / 62 (4) , 401
6	(2017) Structural engineering and mechanics : An international journal A nonlocal zeroth-order shear deformation theory for nonlinear postbuckling of nanobeams / 62 (6) , 695
6	(2016) Smart structures and systems Free vibration analysis of embedded nanosize FG plates using a new nonlocal trigonometric shear deformation theory / 19 (6) , 601
5	(2017) Steel & Composite structures : an international journal A new shear deformation plate theory with stretching effect for buckling analysis of functionally graded sandwich plates / 24 (5) , 569
2	(2016) Computers & concrete Dynamic bending response of SWCNT reinforced composite plates subjected to hygro-thermo-mechanical loading / 20 (2) , 229
3	(2016) Geomechanics & engineering A four variable refined nth-order shear deformation theory for mechanical and thermal buckling analysis of functionally graded plates / 13 (3) , 385
4	(2017) Structural engineering and mechanics : An international journal An original single variable shear deformation theory for buckling analysis of thick isotropic plates / 63 (4) , 439
4	(2016) Structural engineering and mechanics : An international journal Rotating effects on hygro-mechanical vibration analysis of FG beams based on Euler-Bernoulli beam theory / 63 (4) , 471
5	(2016) Structural engineering and mechanics : An international journal A simple analytical approach for thermal buckling of thick functionally graded sandwich plates / 63 (5) , 585
3	(2016) Smart structures and systems Vibration analysis of nonlocal advanced nanobeams in hygro-thermal environment using a new two-unknown trigonometric shear deformation beam theory / 20 (3) , 369
2	(2016) Steel & Composite structures : an international journal A new and simple HSDT for thermal stability analysis of FG sandwich plates / 25 (2) , 157
1	(2016) Structural engineering and mechanics : An international journal Dynamic characteristics of curved inhomogeneous nonlocal porous beams in thermal environment / 64 (1) , 121
2	(2016) Structural engineering and mechanics : An international journal A novel simple two-unknown hyperbolic shear deformation theory for functionally graded beams / 64 (2) , 145
3	(2016) Steel & Composite structures : an international journal An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates / 25 (3) , 257
4	(2017) Steel & Composite structures : an international journal A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate / 25 (4) , 389
4	(2016) Structural engineering and mechanics : An international journal A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates / 64 (4) , 391
4	(2017) Structural engineering and mechanics : An international journal Vibration analysis of micro composite thin beam based on modified couple stress / 64 (4) , 403
6	(2018) Structural engineering and mechanics : An international journal Wave dispersion characteristics of nonlocal strain gradient double-layered graphene sheets in hygro-thermal environments / 65 (6) , 645
1	(2018) Structural engineering and mechanics : An international journal Nonlinear transient analysis of FG pipe subjected to internal pressure and unsteady temperature in a natural gas facility / 66 (1) , 85
4	(2016) Smart structures and systems A novel shear deformation theory for buckling analysis of single layer graphene sheet based on nonlocal elasticity theory / 21 (4) , 397
3	(2018) Structural engineering and mechanics : An international journal Analytical investigation of bending response of FGM plate using a new quasi 3D shear deformation theory: Effect of the micromechanical models / 66 (3) , 317
3	(2016) Structural engineering and mechanics : An international journal A unified formulation for modeling of inhomogeneous nonlocal beams / 66 (3) , 369
1	(2016) Steel & Composite structures : an international journal Buckling analysis of new quasi-3D FG nanobeams based on nonlocal strain gradient elasticity theory and variable length scale parameter / 28 (1) , 13
2	(2016) Structural engineering and mechanics : An international journal The critical buckling load of reinforced nanocomposite porous plates / 67 (2) , 115
3	(2016) Structural engineering and mechanics : An international journal A novel shear and normal deformation theory for hygrothermal bending response of FGM sandwich plates on Pasternak elastic foundation / 67 (3) , 219
4	(2016) Structural engineering and mechanics : An international journal A new plate model for vibration response of advanced composite plates in thermal environment / 67 (4) , 369
None	(2016) Computer methods in applied mechanics and engineering An integrated framework of exact modeling, isogeometric analysis and optimization for variable-stiffness composite panels / 339 (None) , 205
5	(2016) Structural engineering and mechanics : An international journal Analysis of boundary conditions effects on vibration of nanobeam in a polymeric matrix / 67 (5) , 517
4	(2016) Wind & structures A refined quasi-3D hybrid-type higher order shear deformation theory for bending and Free vibration analysis of advanced composites beams / 27 (4) , 269
5	(2016) Structural engineering and mechanics : An international journal Vibration response and wave propagation in FG plates resting on elastic foundations using HSDT / 69 (5) , 511
1	(2016) Steel & Composite structures : an international journal A novel hyperbolic shear deformation theory for the mechanical buckling analysis of advanced composite plates resting on elastic foundations / 30 (1) , 13
1	(2016) Wind & structures Dynamic investigation of porous functionally graded beam using a sinusoidal shear deformation theory / 28 (1) , 19
3	(2019) Structural engineering and mechanics : An international journal A novel refined shear deformation theory for the buckling analysis of thick isotropic plates / 69 (3) , 335
3	(2016) Coupled systems mechanics Forced vibration analysis of functionally graded sandwich deep beams / 8 (3) , 259
6	Abdelkader Mahmoudi. (2016) The journal of sandwich structures & materials A refined quasi-3D shear deformation theory for thermo-mechanical behavior of functionally graded sandwich plates on elastic foundations / 21 (6) , 1906
4	(2016) Strojnícky &ccaron;asopis Free Vibration Analysis of Simply Supported P-FGM Nanoplate Using a Nonlocal Four Variables Shear Deformation Plate Theory / 69 (4) , 9
4	(2016) Advances in materials research : AMR Flexoelectric effects on dynamic response characteristics of nonlocal piezoelectric material beam / 8 (4) , 259
2	(2016) Advances in nano research Mechanical buckling of FG-CNTs reinforced composite plate with parabolic distribution using Hamilton's energy principle / 8 (2) , 135
5	(2016) Structural engineering and mechanics : An international journal A comprehensive review on the modeling of smart piezoelectric nanostructures / 74 (5) , 611
6	(2016) Structural engineering and mechanics : An international journal On scale-dependent stability analysis of functionally graded magneto-electro-thermo-elastic cylindrical nanoshells / 75 (6) , 659
3	(2016) Smart structures and systems Exact solution for nonlinear vibration of clamped-clamped functionally graded buckled beam / 26 (3) , 361
1	(2016) Structural engineering and mechanics : An international journal Thermal frequency analysis of FG sandwich structure under variable temperature loading / 77 (1) , 57
3	(2021) The journal of sandwich structures & materials Bending and free vibration analysis of functionally graded sandwich plates: An assessment of the Refined Zigzag Theory / 23 (3) , 760
7	(2016) The journal of sandwich structures & materials On the buckling of advanced composite sandwich rectangular plates / 23 (7) , 3164
1	(2022) Mathematics and mechanics of solids : MMS Bending analysis of functionally graded porous nanocomposite beams based on a non-local strain gradient theory / 27 (1) , 66