Browse > Article
http://dx.doi.org/10.12989/sem.2016.57.6.1143

The investigation crack problem through numerical analysis  

Yaylaci, Murat (Department of Civil Engineering, Recep Tayyip Erdogan University)
Publication Information
Structural Engineering and Mechanics / v.57, no.6, 2016 , pp. 1143-1156 More about this Journal
Abstract
This paper presents a comparative study of finite element method (FEM) and analytical method for the plane problem of a layered composite containing an internal perpendicular crack in literature. The layered composite consists of two elastic layers having different elastic constants and heights. External load is applied to the upper elastic layer by means o a rigid punch and the lower elastic layer rests on two simple supports. Numerical simulations are realized by the world wide code ANYS software. Two dimensional analysis of the problem is carried out and the results are verified by comparison with solutions reported in literature. Main goal of the numerical simulation is to investigate the normal stress ${\sigma}_x$(0, y), stress intensity factors at the crack factor and the crack opening displacements.
Keywords
fracture mechanics; crack; stress intensity factor; FEM;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Adiyaman, G., Yaylaci, M. and Birinci, A. (2015), "Analytical and finite element solution of a receding contact problem", Struct. Eng. Mech., 54(1), 69-85.   DOI
2 Altunsaray, E. and Bayer, I. (2013), "Deflection and free vibration of symmetrically laminated quasiisotropic thin rectangular plates for different boundary conditions", Ocean Eng., 57, 197-222.   DOI
3 ANSYS (2013), Swanson Analysis Systems Inc., Houston, PA, USA.
4 Birinci, A. and Erdol, E. (2004), "A layered composite containing a crack in its lower layer loaded by a rigid stamp", Eur. J. Mech. A/Solid., 23, 909-924.
5 Birinci, A., Adiyaman, G., Yaylaci, M. and Oner, E. (2015), "Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM", Latin Am. J. Solid. Struct., 12(9), 1771-1789.   DOI
6 Bogdanski, S. (2002), "A rolling contact fatigue crack driven by Squeeze fluid film", Fatig. Fract. Eng. Mater. Struct., 21, 1061-71.
7 Chaari, F., Fakhfakh, T. and Haddar, M. (2009), "Analytical modelling of spur gear tooth crack and influence on gear mesh stiffness", Eur. J. Mech. A/Solid., 28, 461-468.   DOI
8 Delpero, T., Lepoittevin, G. and Sanchez, A. (2010), "Finite element modeling with ANSYS, centre of structure technologies", Swiss Federal Institute of Technology Zurich Swiss.
9 Farjoo, M., Danie, l W. and Weehan, P.A. (2014), "Modeling a squat form crack on a rail laid on an elastic foundation", Eng. Fract. Mech., 85, 47-58.
10 Figiel, L., Kaminski, M. and Lauke, B. (2004), "Analysis of a compression shear fracture test for curved interfaces in layered composites", Eng. Fract. Mech., 71, 967-980.   DOI
11 Hadju, S. (2014), "The investigation of the stress state near the crack tip of central cracks through numerical analysis", Procedia Eng., 69, 477-485.   DOI
12 Isida, M. (1970), "On the determination of stress intensity factors for some common structural problems", Eng. Fract. Mech., 2, 61-79.   DOI
13 Ji, J., Zhang, W., Zhao, W., Yuan, C. and Liu, Y. (2012), "Research of seismic testing and dynamic character of high-rise building structure based on ANSYS", Int. J. Digital Cont. Tech. Its Appl., 6(8), 63-71.   DOI
14 Khan, D., Bhushan, A., Panda, S.K. and Biswas, K. (2013), "Elastic-plastic dynamic fracture analysis for stationary curved cracks", Finite Elem. Anal. Des., 73, 55-64.   DOI
15 Lee, J. (2009), "Identification of multiple cracks in a beam using vibration amplitudes", J. Sound Vib., 326, 205-212.   DOI
16 Leverenz, R.K. (1972), "A finite element stress analysis of a crack in a bi-material plate", Int. J. Fract. Mech., 8, 311-24.   DOI
17 Oner, E., Yaylaci, M. and Birinci, A. (2015), "Analytical solution of a contact problem and comparison with the results from FEM", Struct. Eng. Mech., 54(4), 607-622.   DOI
18 Qiao, P. and Wang, J. (2004), "Partial Mechanics and fracture of crack tip deformable bi-material interface", Int. J. Solid. Struct., 41, 7423-7444.   DOI
19 Pandya, Y. and Parey, A. (2013), "Failure path based modified gear mesh stiffness for spur gear pair with tooth root crack", Eng. Fail. Anal., 27, 286-96.   DOI
20 Papadopoulos, G.A., Badalouka, V. and Souyiannis, J. (2008), "Experimental study of the reduction at crack-tip stress intensity factor $K_1$ by bonded patches", Lett. Fract. Micromech., 149, 199-205.
21 Shao, R., Dong, F., Wang, W. and Jia, P. (2013), "Influence of cracks on dynamic characteristics and stress intensity factor of gears", Eng. Fail. Anal., 32, 63-80.   DOI
22 Sabliov, C.M., Salvi, D.A. and Boldor, D. (2007), "High frequency electromagnetism, heat transfer and fluid flow coupling in ANSYS multiphysics", IMPI, 4(4), 5-17.
23 Yaylaci, M., O ner, E. and Birinci, A. (2014), "Comparison between analytical and ANSYS calculations for a receding contact", Am. Soc. Civil Eng., ASCE, 140(9), 71-80.
24 Zandi, Y. and Akpinar, M.V. (2012), "Evaluation of internal resistance in asphalt concretes", Int. J. Concrete Struct. Mater., 6(4), 247-250.   DOI