1 |
ASCE SEI 41/06, (2007), Seismic Rehabilitation of Existing Building: ASCE SEI 41/06, American Society of Civil Engineers, USA.
|
2 |
Barros, R.C. and Almeida, R. (2005), "Pushover analysis of asymmetric three-dimensional building frames", J. Civil Eng. Manag., 11(1), 3-12.
|
3 |
Bayraktar, A., Coskun, N. and Yalcin, A. (2007), "Damages of masonry buildings during the July 2, 2004 Dogubayazit (Agn) earthquake in Turkey", Eng. Fail. Anal., 14, 147-157.
DOI
ScienceOn
|
4 |
Bruneau, M. (2002), "Building damage from the Marmara, Turkey earthquake of August 17, 1999", J. Seismol., 6, 357-377.
DOI
|
5 |
CEB-FIP Model Code 2010 (2012), CEB-FIP Model Code 2010 - Final draft, vol. 1., Comite EuroInternational du Beton.
|
6 |
Chopra, A.K. and Goel, R.K. (2001), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31, 561-582.
|
7 |
Dogangun, A. (2004), "Performance of reinforced concrete buildings during the May 1, 2003 Bingol earthquake in Turkey", Eng. Struct., 26, 841-856.
DOI
|
8 |
Dolsek, M. and Fajfar, P. (2005), "Simplified non-linear seismic analysis of infilled reinforced concrete frames", Earthq. Eng. Struct. Dyn., 34, 49-66.
DOI
|
9 |
Eurocode 2 (2004), Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings, EN1992-1-1, Brussel.
|
10 |
Fajfar, P. (1999), "Capacity spectrum method based on inelastic demand spectra", Earthq. Eng. Struct. Dyn., 28, 979-993.
DOI
|
11 |
Ghobarah, A. (2001), "Performance-based design in earthquake engineering: state of development", Eng. Struct., 23, 878-884.
DOI
ScienceOn
|
12 |
Kizilkanat, A., Cosar, A., Kocak, A., Guney, D., Selcuk, M.E. and Yildinm, M. (2011), 23 October 2011 Van Earthquake Technical Investigation Report, Yildiz Technical University Press.
|
13 |
Kilar, V. and Fajfar, P. (1997), "Simple push-over analysis of asymmetric buildings", Earthq. Eng. Struct. Dyn., 26, 233-249.
DOI
|
14 |
Krawinkler, H. and Seneviranta, G.D.P.K. (1998), "Pros and cons of a pushover analysis of seismic performance evaluation", Eng. Struct., 20, 452-464.
DOI
|
15 |
Leite, J. (2014), "Design of masonry walls for building enclosures subjected to extreme actions", PhD Dissertation, Minho University, Portugal.
|
16 |
Lourenco, P.B. and Rots, J.G. (1997), "A multi-surface interface model for the analysis of masonry structures", J. Struct. Eng., ASCE, 123(7), 660-668.
DOI
|
17 |
Lourenco, P.B. (2009), "Recent advances in masonry structures: Micromodelling and homogenization, in multiscale modeling in solid mechanics: Computational approaches", Eds. U. Galvanetto, M.H. Ferri Aliabadi, Imperial College Press, 251-294.
|
18 |
Lourenco, P.B., Rots, J.G. and Blaauwendraad, J. (1998), "Continuum model for masonry: parameter estimation and validation", J. Struct. Eng., ASCE, 124(6), 642-652.
DOI
|
19 |
Ministry of Construction (2007), Turkey Earthquake Disaster Prevention 2007, Ankara.
|
20 |
Lourenco P B, (1996), "Computational strategies for masonry structures", PhD Thesis, Delft, Netherland.
|
21 |
Moghadam, A.S. and Tso, W. (2000), "Pushover analysis for asymmetric and set-back multi-story buildings", 12th WCEE, 1093-1101.
|
22 |
Pereira, M.F.P. (2013), "Avaliagao do desempenho das envolventes dos edificios face a acgao dos sismos", PhD Dissertation, University of Minho, Portugal.
|
23 |
Reinhorn, A.M. (1997), "Inelastic analysis techniques in seismic evaluations", Proceedings of International Workshop on Seismic Design Methodologies for the Next Generation of Codes, Slovenia.
|
24 |
Salonikios, T., Karakostas, C., Lekidis, V and Anthoine, A. (2003), "Comparative inelastic pushover analysis of masonry frames", Eng. Struct., 25, 1515-1523.
DOI
|
25 |
Sayin, E., Yon, B., Calayir, Y. and Karaton, M. (2013), "Failures of masonry and adobe buildings during the June 23, 2011 Maden-(Elazig) earthquake in Turkey", Eng. Fail. Anal., 342007 779-791.
DOI
|
26 |
Sayin, E., Yon, B., Calayir, Y. and Gor, M., (2014), "Construction failures of masonry and adobe buildings during the 2011 Van earthquakes in Turkey", Struct. Eng. Mech., 51(3), 503-518.
DOI
|
27 |
Selby, R.G. and Vecchio, F.J. (1993), "Three-dimensional constitutive relations for reinforced concrete", Technical Report 93-02, University of Toronto, Department of Civil Engineering, Toronto, Canada.
|
28 |
Structural masonry (1997), An experimental/numerical basis for practical design rules, CUR Report 171, CRC Press, January. (in Dutch)
|
29 |
Tso, W.K. and Moghadan, A.S. (1996), "Damage assessment of eccentric multistorey buildings using 3-D pushover analysis", 11th World Conference on Earthquake Engineering, 997-1005.
|
30 |
Tapan, M., Comert, M., Demir, C., Sayan, Y., Orakcal, K. and Ilki, A. (2013), "Failures of structures during the October 23, 2011 Tabanli (Van) and November 9, 2011 Edremit (Van) earthquakes in Turkey", Eng. Fail. Anal., 34, 606-628.
DOI
|
31 |
TNO (2012), "Displacement method Analyser, User's Manual", Release 9.4.4, Netherlands.
|
32 |
Vecchio, F.J. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI J., 83(22), 219-231.
|
33 |
Yon, B., Sayin, E. and Koksal, T. S., (2013), "Seismic response of the buildings during the May 19, 2011 Simav, Turkey earthquake" Earthq. Struct., 5(3), 343-357.
DOI
|
34 |
Yon, B. and Calayir, Y. (2014), "Effects of confinement reinforcement and concrete strength on nonlinear behavior of RC buildings", Comput. Concrete, 14(3), 279-297.
DOI
|
35 |
Zijl, V.G.P.A.G. (2000), "Computational modeling of masonry creep and shrinkage", PhD Thesis, Delft University of Technology, Nederland.
|