1 |
Acha, B.A., Marcovich, N.E. and Karger-Kocsis, J. (2006), "Biodegradable jute cloth reinforced thermoplastic copolyester composites: fracture and failure behavior", Plast. Rub. Compos., 35(2), 73-82.
DOI
|
2 |
Aggelis, D., Kordatos, E. and Matikas, T. (2011), "Acoustic emission for fatigue damage characterization in metal plates", Mech. Res. Commun., 38(2), 106-110.
DOI
|
3 |
Aggelis, D. and Matikas, T. (2012), "Effect of plate wave dispersion on the acoustic emission parameters in metals", Comput. Struct., 98, 17-22.
|
4 |
Aggelis, D., Verbruggen, S., Tsangouri, E., Tysmans, T. and Van Hemelrijck, D. (2013), "Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation", Construct. Build. Mater., 47, 1037-1045.
DOI
|
5 |
Aggelis, D.G. (2011), "Classification of cracking mode in concrete by acoustic emission parameters", Mech. Res. Commun., 38(3), 153-157.
DOI
|
6 |
Aggelis, D.G., Shiotani, T., Momoki, S. and Hirama, A. (2009), "Acoustic emission and ultrasound for damage characterization of concrete elements", ACI Mater. J., 106(6), 509-514.
|
7 |
Ai, Q., Liu, C.X., Chen, X.R., He, P. and Wang, Y. (2010), "Acoustic emission of fatigue crack in pressure pipe under cyclic pressure", Nucl. Eng. Des., 240(10), 3616-3620.
DOI
|
8 |
Aicher, S., Hofflin, L. and Dill-Langer, G. (2001), "Damage evolution and acoustic emission of wood at tension perpendicular to fiber", Euro. J. Wood Wood Prod., 59(1), 104-116.
DOI
|
9 |
Aker, E., Kuhn, D., Vavrycuk, V., Soldal, M. and Oye, V. (2014), "Experimental investigation of acoustic emissions and their moment tensors in rock during failure", Int. J. Rock Mech. Min. Sci., 70, 286-295.
|
10 |
Anuar, H., Ahmad, S., Rasid, R., Surip, S., Czigany, T. and Romhany, G. (2007), "Essential work of fracture and acoustic emission study on TPNR composites reinforced by kenaf fiber", J. Compos. Mater., 41(25), 3035-3049.
DOI
|
11 |
Arul, S., Vijayaraghavan, L. and Malhotra, S. K. (2007), "Online monitoring of acoustic emission for quality control in drilling of polymeric composites", J. Mater. Proc. Tech., 185(1-3), 184-190.
DOI
|
12 |
Asakawa, T. and Peregoy, C.F. (1965), Manufacturing Technology for Large Monolithic Fiberglass Reinforced Plastic Rocket Motor Case, Volume I: Basic Text: Defense Technical Information Center.
|
13 |
ASTM E1316 (2014), Standard Terminology for Nondestructive Examinations, West Conshohocken, ASTM International.
|
14 |
Aymerich, F. and Staszewski, W. (2010), "Experimental study of impact-damage detection in composite laminates using a cross-modulation vibro-acoustic technique", Struct. Hlth. Monit., doi: 10.1177/1475921710365433.
DOI
|
15 |
Barber, G. (2006), "An overview Of NDT technologies and systems", Proceedings of the Asia-Pacific Conference on NDT, 5th, Auckland, New Zealand.
|
16 |
Benevolenski, O. and Karger-Kocsis, J. (2001), "Fracture and failure behavior of partially consolidated ciscontinuous glass fiber mat?reinforced polypropylene composites (Azdel SuperLite(R))", Paper presented at the Macromolecular Symposia.
|
17 |
Boehnlein, T., Fox, J., Frock, B., Klosterman, E. and Ko, R. (2004), "Research on Advanced Nondestructive Evaluation (NDE) Methods for Aerospace Structures", DTIC Document.
|
18 |
Boschetto, A. and Quadrini, F. (2011), "Powder size measurement by acoustic emission", Measurement, 44(1), 290-297.
DOI
|
19 |
Brown, J., Vendra, L. and Rabiei, A. (2010), "Bending properties of al-steel and steel-steel composite metal foams", Metal. Mater. Tran. A, 41(11), 2784-2793.
DOI
|
20 |
Brepta, R., Vales, F., Cerv, J. and Tikal, B. (1996), "Rayleigh wave dispersion due to spatial (FEM) discretization of a thin elastic solid having non-curved boundary", Comput. Struct., 58(6), 1233-1244.
DOI
|
21 |
Caneva, C., De Rosa, I. and Sarasini, F. (2008), "Monitoring of impacted aramid-reinforced composites by embedded PVDF acoustic emission sensors", Strain, 44(4), 308-316.
DOI
|
22 |
Caneva, C., De Rosa, I.M. and Sarasini, F. (2007), "Acoustic emission monitoring of flexurally loaded aramid/epoxy composites by embedded PVDF sensors", J. Acoust. Emission, 25, 80-91.
|
23 |
Carlos, M., Cole, P., Vahaviolos, S., Halkyard, T. and Alampalli, S. (2000), "Acoustic emission bridge inspection/monitoring strategies", Paper presented at the Proc., 4th Structural Materials Technology-An NDT Conf.
|
24 |
Chen, B. and Liu, J. (2008), "Damage in carbon fiber-reinforced concrete, monitored by both electrical resistance measurement and acoustic emission analysis", Construct. Build. Mater., 22(11), 2196-2201.
DOI
|
25 |
Chen, X., and Li, B. (2007), "Acoustic emission mepod for tool condition monitoring based on wavelet analysis", Int. J. Adv. Manuf. Tech., 33(9-10), 968-976.
DOI
|
26 |
Czigany, T., Poloskei, K. and Karger-Kocsis, J. (2005), "Fracture and failure behavior of basalt fiber matreinforced vinylester/epoxy hybrid resins as a function of resin composition and fiber surface treatment", J. Mater. Sci., 40(21), 5609-5618.
DOI
|
27 |
De Groot, P.J., Wijnen, P.A. and Janssen, R.B. (1995), "Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites", Compos. Sci. Tech., 55(4), 405-412.
DOI
|
28 |
Dang Hoang, T., Herbelot, C. and Imad, A. (2010), "Rupture and damage mechanism analysis of a bolted assembly using coupling techniques between AE and DIC", Eng. Struct., 32(9), 2793-2803.
DOI
|
29 |
Danyadi, L., Renner, K., Szabo, Z., Nagy, G., Moczo, J. and Pukanszky, B. (2006), "Wood flour filled PP composites: adhesion, deformation, failure", Poly. Adv. Tech., 17(11-12), 967-974.
DOI
|
30 |
Dassios, K.G., Kordatos, E.Z., Aggelis, D.G. and Matikas, T.E. (2014), "Crack growp monitoring in ceramic matrix composites by combined infrared thermography and acoustic emission", J. Am. Ceramic Soc., 97(1), 251-257.
DOI
|
31 |
de Oliveira, R. and Marques, A.T. (2008), "Health monitoring of FRP using acoustic emission and artificial neural networks", Comput. Struct., 86(3-5), 367-373.
DOI
|
32 |
Diamanti, K. and Soutis, C. (2010), "Structural health monitoring techniques for aircraft composite structures", Pr. Aerosp. Sci., 46(8), 342-352.
DOI
ScienceOn
|
33 |
Dogossy, G. and Czigany, T. (2006), "Failure mode characterization in maize hull filled polyethylene composites by acoustic emission", Poly. Test., 25(3), 353-357.
DOI
|
34 |
Dornfeld, D. (1992), "Application of acoustic emission techniques in manufacturing", NDT & E Int., 25(6), 259-269.
DOI
|
35 |
Dornfeld, D., Lee, Y. and Chang, A. (2003), "Monitoring of ultraprecision machining processes", Int. J. Adv. Manuf. Tech., 21(8), 571-578.
DOI
|
36 |
Drouillard, T. (1996), "A history of acoustic emission", J. Acoust. Emission, 14(1), 1-34.
|
37 |
Green, A., Lockman, C. and Steele, R. (1964), "Acoustic verification of structural integrity of polaris chambers", Modern Plast., 41(11), 137-139.
|
38 |
Giurgiutiu, V., Zagrai, A., Bao, J., Redmond, J., Roach, D. and Rackow, K. (2003), "Active sensors for health monitoring of aging aerospace", Int. J. Comadem, 6(1), 3-21.
|
39 |
Golaski, L., Gebski, P. and Ono, K. (2002), "Diagnostics of reinforced concrete bridges by acoustic emission", J. Acoust. Emission, 20, 83-89.
|
40 |
Govekar, E., Gradisek, J. and Grabec, I. (2000), "Analysis of acoustic emission signals and monitoring of machining processes", Ultrasonics, 38(1-8), 598-603.
DOI
|
41 |
Green, A.T. (2006), Proceedings of the 27th European Conference on Acoustic Emission Testing (EWGAE27), Cardiff, Wales, UK.
|
42 |
Grosse, CU. and Ohtsu, M.E. (2008), Acoustic Emission Testing, Springer, Verlag Berlin Heidelberg.
|
43 |
Haber, R.E., Jimenez, J.E., Peres, C.R. and Alique, J.R. (2004), "An investigation of tool-wear monitoring in a high-speed machining process", Sens. Actu. A: Phy., 116(3), 539-545.
DOI
|
44 |
Han, Z., Luo, H., Cao, J. and Wang, H. (2011), "Acoustic emission during fatigue crack propagation in a micro-alloyed steel and welds", Mater. Sci. Eng. A, 528(25), 7751-7756.
DOI
ScienceOn
|
45 |
Hao, S., Ramalingam, S. and Klamecki, B. (2000), "Acoustic emission monitoring of sheet metal forming: characterization of the transducer, the work material and the process", J. Mater. Proc. Tech., 101(1), 124-136.
DOI
|
46 |
Jayakumar, T., Mukhopadhyay, C.K., Venugopal, S., Mannan, S.L. and Raj, B. (2005), "A review of the application of acoustic emission techniques for monitoring forming and grinding processes", J. Mater. Proc. Tech., 159(1), 48-61.
DOI
ScienceOn
|
47 |
Holford, K.M., Pullin, R., Evans, S.L., Eaton, M.J., Hensman, J. and Worden, K. (2009), "Acoustic emission for monitoring aircraft structures", Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 223(5), 525-532.
|
48 |
Huang, M., Jiang, L., Liaw, P.K., Brooks, C.R., Seeley, R. and Klarstrom, D.L. (1998), "Using acoustic emission in fatigue and fracture materials research", JOM, 50(11), 1-14.
|
49 |
Jackson, C.N., Sherlock, C.N. and Moore, P.O. (1998), Nondestructive Testing Handbook, Acoustic Emission Testing, American Society for Nondestructive Testing.
|
50 |
Jemielniak, K. and Arrazola, P.J. (2008), "Application of AE and cutting force signals in tool condition monitoring in micro-milling", CIRP J. Manuf. Sci. Tech., 1(2), 97-102.
DOI
|
51 |
Jemielniak, K., Kossakowska, J. and Urba?ski, T. (2011), "Application of wavelet transform of acoustic emission and cutting force signals for tool condition monitoring in rough turning of Inconel 625", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(1), 123-129.
DOI
|
52 |
Kaphle, M.R. (2012), "Analysis of acoustic emission data for accurate damage assessment for structural health monitoring applications", http://eprints.qut.edu.au/53201/1/Manindra_Kaphle_Thesis.pdf.
|
53 |
Keshtgar, A. and Modarres, M. (2013), "Acoustic emission-based fatigue crack growp prediction", Reliability and Maintainability Symposium (RAMS), 2013 Proceedings - Annual.
|
54 |
Lee, D.E., Hwang, I., Valente, C.M.O., Oliveira, J.F.G. and Dornfeld, D. (2006), "Precision Manufacturing Process Monitoring with Acoustic Emission", Eds. Wang, L. and Gao, R., Condition Monitoring and Control for Intelligent Manufacturing, Springer, London.
|
55 |
Kishi, T., Ohtsu, M. and Yuyama, S. (2000), Acoustic Emission-Beyond the Millennium, Elsevier.
|
56 |
Kocsis, Z. and Czigany, T. (2007), Investigation of the Debonding Process in Wood Fiber Reinforced Polymer Composites by Acoustic Emission, Trans Tech Publications.
|
57 |
Kurz, J.H., Grosse, C.U. and Reinhardt, H.W. (2005), "Strategies for reliable automatic onset time picking of acoustic emissions and of ultrasound signals in concrete", Ultrasonics, 43(7), 538-546.
DOI
|
58 |
Leone Jr, F.A., Ozevin, D., Godinez, V., Mosinyi, B., Bakuckas Jr, J.G., Awerbuch, J. and Tan, T.M. (2008), "Acoustic emission analysis of full-scale honeycomb sandwich composite curved fuselage panels", Proceedings of the 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring.
|
59 |
Li, X. (2002), "A brief review: acoustic emission method for tool wear monitoring during turning", Int. J. Mach. Tool. Manuf., 42(2), 157-165.
DOI
|
60 |
Liu, P.F., Chu, J.K., Liu, Y.L. and Zheng, J.Y. (2012), "A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emission", Mater. Des., 37, 228-235.
DOI
|
61 |
Marec, A., Thomas, J.H. and El Guerjouma, R. (2008), "Damage characterization of polymer-based composite materials: Multivariable analysis and wavelet transform for clustering acoustic emission data", Mech. Syst. Signal Pr., 22(6), 1441-1464.
DOI
|
62 |
Mclaskey, G.C. and Glaser, S.D. (2007), "Temporal evolution and 3D locations of acoustic emissions produced from the drying shrinkage of concrete", J. Acoust. Emission, 25(1), 52-57.
|
63 |
Margueres, P., Meraghni, F. and Benzeggagh, M. (2000), "Comparison of stiffness measurements and damage investigation techniques for a fatigued and post-impact fatigued GFRP composite obtained by RTM process", Compos. Part A: Appl. Sci. Manuf., 31(2), 151-163.
DOI
|
64 |
Mathew, M.T., Pai, P.S. and Rocha, L.A. (2008), "An effective sensor for tool wear monitoring in face milling: Acoustic emission", Sadhana, 33(3), 227-233.
DOI
|
65 |
Mayr, S.I., Stanchits, S., Langenbruch, C., Dresen, G. and Shapiro, S.A. (2011), "Acoustic emission induced by pore-pressure changes in sandstone samples", Geophysics, 76(3), MA21-MA32.
DOI
|
66 |
Michlmayr, G., Cohen, D. and Or, D. (2012), "Sources and characteristics of acoustic emissions from mechanically stressed geologic granular media-A review", Earth-Sci. Rev., 112(3), 97-114.
DOI
|
67 |
Mizutani, Y., Nagashima, K., Takemoto, M. and Ono, K. (2000), "Fracture mechanism characterization of cross-ply carbon-fiber composites using acoustic emission analysis", NDT & E Int., 33(2), 101-110.
DOI
|
68 |
Mohd, S. (2013), "Acoustic emission for fatigue crack monitoring in nuclear piping system (PHD)", Cardiff Univeristy, Retrieved from http://orca.cf.ac.uk/id/eprint/47735.
|
69 |
Mori, Y., Obata, Y., Pavelka, J., Sikula, J. and Lokajicek, T. (2004), "AE Kaiser effect and electromagnetic emission in the deformation of rock sample", J. Acoust. Emission.
|
70 |
Musa, J. (2002), "Application of Acoustic Emission (AE) technique in various materials (metals, woods and bricks)", University Malaysia Sarawak.
|
71 |
Ohtsu, M. (2006), "Quantitative AE techniques standardized for concrete structures", Adv. Mater. Res., 13, 183-192.
|
72 |
Naderi, M., Kahirdeh, A. and Khonsari, M.M. (2012), "Dissipated permal energy and damage evolution of Glass/Epoxy using infrared thermography and acoustic emission", Compos. Part B: Eng., 43(3), 1613-1620.
DOI
|
73 |
NDT (2012), The Collaboration for NDT Education, www.ndt-ed.org.
|
74 |
Ohno, K. and Ohtsu, M. (2010), "Crack classification in concrete based on acoustic emission", Construct. Build. Mater., 24(12), 2339-2346.
DOI
|
75 |
Ohtsu, M. and Tomoda, Y. (2008), "Phenomenological model of corrosion process in reinforced concrete identified by acoustic emission", ACI Mater. J., 105(2), 194-199.
|
76 |
Ohtsu, M. and Uddin, F.A. (2008), "Mechanisms of corrosion-induced cracks in concrete at meso-and macro-scales", J. Adv. Concrete Tech., 6(3), 419-429.
DOI
|
77 |
Ono, K. (2011), "Acoustic emission in materials research-a review", J. Acoust Emission, 29, 284-308.
|
78 |
Ono, K. and Gallego, A. (2012), "Research and applications of AE on advanced composites", Proceedings 30th European Conference on Acoustic Emission 2012, Eds. Gallego, A. and Ono, K., Granada, Spain, September.
|
79 |
Oskouei, A.R. and Ahmadi, M. (2010), "Acoustic emission characteristics of mode I delamination in glass/polyester composites", J. Compos. Mater., 44(7), 793-807.
DOI
|
80 |
PAC (2005), DiSP with AEwin User's Manual Rev. 3, from Physical Acoustic Corporation.
|
81 |
Pappas, Y.Z. and Kostopoulos, V. (2001), "Toughness characterization and acoustic emission monitoring of a 2-D carbon/carbon composite", Eng. Fract. Mech., 68(14), 1557-1573.
DOI
|
82 |
Pullin, R., Eaton, M.J., Hensman, J.J., Holford, K.M., Worden, K. and Evans, S. (2010), "Validation of acoustic emission (AE) crack detection in aerospace grade steel using digital image correlation", Appl. Mech. Mater., 24, 221-226.
|
83 |
Park, J.M., Kong, J.W., Kim, J.W. and Yoon, D.J. (2004), "Interfacial evaluation of electrodeposited single carbon fiber/epoxy composites by fiber fracture source location using fragmentation test and acoustic emission", Compos. Sci. Tech., 64(7), 983-999.
DOI
|
84 |
Pawar, P. and Ganguli, R. (2007), "Helicopter rotor health monitoring-a review", Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 221(5), 631-647.
DOI
|
85 |
Pollock, A.A. (1989), Acoustic Emission Inspection, Vol. 17, Nondestructive Evaluation and Quality Control, ASM International.
|
86 |
Reiterer, A., Stanzl-Tschegg, S. and Tschegg, E. (2000), "Mode I fracture and acoustic emission of softwood and hardwood", Wood Sci. Tech., 34(5), 417-430.
DOI
|
87 |
Roach, D. (2008), "Assessing conventional and advanced NDI for composite aircraft", High Perform. Compos., 16(4), 72.
|
88 |
Roberts, T. and Talebzadeh, M. (2003), "Acoustic emission monitoring of fatigue crack propagation", J. Construct. Steel Res., 59(6), 695-712.
DOI
|
89 |
Romhany, G., Karger-Kocsis, J. and Czigany, T. (2003), "Tensile fracture and failure behavior of thermoplastic starch with unidirectional and cross-ply flax fiber reinforcements", Macromol. Mater. Eng., 288(9), 699-707.
DOI
|
90 |
Rose, J.L. (2004), Ultrasonic Waves in Solid Media, Cambridge University Press.
|
91 |
Sharma, V., Sharma, S.K. and Sharma, A. (2008), "Cutting tool wear estimation for turning", J. Intel. Manuf., 19(1), 99-108.
DOI
|
92 |
Rouchier, S., Foray, G., Godin, N., Woloszyn, M. and Roux, J.J. (2013), "Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emission", Construct. Build. Mater., 38, 371-380.
DOI
ScienceOn
|
93 |
Schnars, U. and Henrich, R. (2006), "Applications of NDT methods on composite structures in aerospace industry", Proceedings of the Conference on Damage in Composite Materials, Stuttgart, Germany.
|
94 |
Sedlak, P., Hirose, Y., Khan, S.A., Enoki, M. and Sikula, J. (2009), "New automatic localization technique of acoustic emission signals in thin metal plates", Ultrasonics, 49(2), 254-262.
DOI
|
95 |
Shen, G., Geng, R. and Liu, S. (2002), "Parameter analysis of acoustic emission signals", Chin. J. Nondestruct. Test., 24, 72-77.
|
96 |
Shiotani, T. (2006), "Evaluation of long-term stability for rock slope by means of acoustic emission technique", NDT & E Int., 39(3), 217-228.
DOI
|
97 |
Soulioti, D., Barkoula, N., Paipetis, A., Matikas, T., Shiotani, T. and Aggelis, D. (2009), "Acoustic emission behavior of steel fibre reinforced concrete under bending", Construct. Build. Mater., 23(12), 3532-3536.
DOI
ScienceOn
|
98 |
Speckmann, H. and Henrich, R. (2004), "Structural health monitoring (SHM)-overview on technologies under development", Proceedings of the 16th World Conference on NDT, Montreal, Canada.
|
99 |
Stanchits, S., Mayr, S., Shapiro, S. and Dresen, G. (2011), "Fracturing of porous rock induced by fluid injection", Tectonophysics, 503(1), 129-145.
DOI
|
100 |
Sun, Q. and Tang, Y. (2002), "Singularity analysis using continuous wavelet transform for bearing fault diagnosis", Mech. Syst. Signal Pr., 16(6), 1025-1041.
DOI
|
101 |
Suresha, C. and Rajaprakash, B. (2009), "Applicability of acoustic emission in the analysis of friction stir welded joints", doi:10.1.1.381.5964.
|
102 |
Szabo, J.S., Kocsis, Z. and Czigany, T. (2004), "Mechanical properties of basalt fibre reinforced PP/PA blends", Mech. Eng., 48(2), 119-132.
|
103 |
Takeda, N. (2008), "Recent development of structural health monitoring technologies for aircraft composite structures", Proceedings of the 26th International Congress of the Aeronautical Sciences.
|
104 |
Teti, R., Jemielniak, K., O'Donnell, G. and Dornfeld, D. (2010), "Advanced monitoring of machining operations", CIRP Annal. Manuf. Tech., 59(2), 717-739.
DOI
|
105 |
Uddin, F.A., Shigeishi, M. and Ohtsu, M. (2006), "Fracture mechanics of corrosion cracking in concrete by acoustic emission", Meccanica, 41(4), 425-442.
DOI
|
106 |
Ullmann, T., Schmidt, T., Hofmann, S. and Jemmali, R. (2010), "In-line quality assurance for the manufacturing of carbon fiber reinforced aircraft structures", Proceedings of 2nd International Symposium on NDT in Aerospace.
|
107 |
Unnporsson, R. (2013), Hit Detection and Determination in AE Bursts, Ed. Sikorski, W., Acoustic Emission - Research and Applications.
|
108 |
Vallen, H. (2002), AE Testing Fundamentals, Equipment, Applicationsm NDTnet, 7.
|
109 |
Velayudham, A., Krishnamurthy, R. and Soundarapandian, T. (2005), "Acoustic emission based drill condition monitoring during drilling of glass/phenolic polymeric composite using wavelet packet transform", Mater. Sci. Eng. A, 412(1), 141-145.
DOI
|
110 |
Vogel, T., Schechinger, B. and Fricker, S. (2006), "Acoustic emission analysis as a monitoring method for prestressed concrete structures", Proceedings of the 9th European Conference on NDT (ECNDT), Berlin, September.
|
111 |
Watson, J., Yuyama, S., Pullin, R. and Ing, M. (2005), Acoustic emission monitoring applications for civil structures, Bridge Management 5, Thomas Telford, London.
|
112 |
Yu, J., Ziehl, P., Zarate, B. and Caicedo, J. (2011), "Prediction of fatigue crack growth in steel bridge components using acoustic emission", J. Construct. Steel Res., 67(8), 1254-1260.
DOI
|
113 |
Yu, L., Momeni, S., Godinez, V., Giurgiutiu, V., Ziehl, P. and Yu, J. (2011), "Dual mode sensing with lowprofile piezoelectric thin wafer sensors for steel bridge crack detection and diagnosis", Adv. Civil Eng., Article ID 402179, 10.
|
114 |
Zeng, W., Wu, H. and Zhang, J. (2006), "Effect of tool wear on microstructure, mechanical properties and acoustic emission of friction stir welded 6061 Al alloy", Acta Metallurgica Sinica (English Letters), 19(1), 9-19.
DOI
|
115 |
Zeng, W.M., Wu, H.L. and Zhang, J. (2006), "Effect of tool wear on microstructure, mechanical properties and acoustic emission of friction stir welded 6061 Al ALLOY", Acta Metallurgica Sinica (English Letters), 19(1), 9-19.
DOI
|