[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.12989/sem.2015.54.1.105

An improved modal strain energy method for structural damage detection, 2D simulation

Moradipour, Parviz (School of Civil Engineering & Built Environment, Science and Engineering Faculty, Queensland University of Technology)
Chan, Tommy H.T. (School of Civil Engineering & Built Environment, Science and Engineering Faculty, Queensland University of Technology)
Gallag, Chaminda (School of Civil Engineering & Built Environment, Science and Engineering Faculty, Queensland University of Technology)

Publication Information

Structural Engineering and Mechanics / v.54, no.1, 2015 , pp. 105-119 More about this Journal

Abstract

Structural damage detection using modal strain energy (MSE) is one of the most efficient and reliable structural health monitoring techniques. However, some of the existing MSE methods have been validated for special types of structures such as beams or steel truss bridges which demands improving the available methods. The purpose of this study is to improve an efficient modal strain energy method to detect and quantify the damage in complex structures at early stage of formation. In this paper, a modal strain energy method was mathematically developed and then numerically applied to a fixed-end beam and a three-story frame including single and multiple damage scenarios in absence and presence of up to five per cent noise. For each damage scenario, all mode shapes and natural frequencies of intact structures and the first five mode shapes of assumed damaged structures were obtained using STRAND7. The derived mode shapes of each intact and damaged structure at any damage scenario were then separately used in the improved formulation using MATLAB to detect the location and quantify the severity of damage as compared to those obtained from previous method. It was found that the improved method is more accurate, efficient and convergent than its predecessors. The outcomes of this study can be safely and inexpensively used for structural health monitoring to minimize the loss of lives and property by identifying the unforeseen structural damages.

Keywords

modal strain energy; degree-of-freedom (DOF); finite element method (FEM); vibration based damage detection; structural damage;

Citations & Related Records

Times Cited By KSCI : 3 (Citation Analysis)

Reference
Cited By KSCI

1	Asgarian, B., Amiri, M. and Ghafooripour, A. (2009), "Damage detection in jacket type offshore platforms using modal strain energy", Struct. Eng. Mech., 33(2), 325-337. DOI
2	Brehm, M., Zabel, V. and Bucher, C. (2010), "An automatic mode pairing strategy using an enhanced modal assurance criterion based on modal strain energies", J. Sound. Vib., 329, 5375-5392. DOI
3	Chan, T.H.T. and Thambiratnam, D.P. (2011), Structural Health Monitoring in Australia, Nova Science Publishers, New York, NY, USA.
4	Ding, Q., Zou, C., Tang, Y. and Zhang, S. (2013), "Damage detection in road and bridge based on modal strain energy method", ICTE(C) American Society of Civil Engineers (ASCE), 1753-1758.
5	Hu, H.C. (1987), The Vibration Theory of Multiple Freedom System, Science Press, China.
6	Hu, H., Wu, C. and Lu, W.J. (2011), "Damage detection of circular hollow cylinder using modal strain energy and scanning damage index methods", Comput. Struct., 89, 149-160. DOI ScienceOn
7	Kisa, M. and Gurel, M.A. (2005), "Modal analysis of cracked cantilever composite beams", Struct. Eng. Mech., 20(2), 143-160. DOI
8	Li, L., Hun, Y. and Wang, X. (2013), "Numerical methods for evaluating the sensitivity of element modal strain energy", Finite Elem. Anal. Des., 64, 13-23. DOI
9	Moradipour, P., Chan, T.H.T and Gallage, C. (2013), "Health monitoring of short- and medium-span bridges using an improved modal strain energy method", Proceedings of the 5th International Workshop on Civil Structural Health Monitoring(CSHM-5), Ube, Japan, October.
10	Seyedpoor, S.M. (2012), "A two-stage method for structural damage detection using a modal strain energy based index and particle swarm optimization", Int. J. Nonlin. Mech., 47, 1-8.
11	Shi, Z.Y., Ding, X.H. and Gu, H.Z. (1995), "A new model reduction and expansion method", Proceedings of the International Conference on Structural Dynamics, Vibration, Noise and Control, Hong Kong.
12	Shi, Z.Y., Law, S.S. and Zhang, L.M. (2000), "Structural damage detection from modal strain energy change", J. Eng. Mech., 126, 1216-1223. DOI
13	Shih, H.W., Thambiratnam, D.P. and Chan, T.H.T. (2009), "Vibration based structural damage detection in flexural members using multi-criteria approach", J. Sound. Vib., 323, 645-661. DOI
14	Srinivas, V., Ramanjaneyulu, K. and Jeyasehar, C.A. (2010), "Multi-stage approach for structural damage identification using modal strain energy and evolutionary optimization techniques", Struct. Hlth. Monit., 10(2), 219-230.
15	Wahalthantri, B., Thambiratnam, D.P., Chan, T.H.T. and Fawzia, S. (2012), "An improved method to detect damage using modal strain energy based damage index", Adv. Struct. Eng., 15, 727-742. DOI
16	Wang, S., Zhang, M. and Liu, F. (2013), "Estimation of semi-rigid joints by cross modal strain energy method", Struct. Eng. Mech., 47(6), 757-771. DOI
17	Wang, F.L., Chan, T.H.T., Thambiratnam, D.P., Tan, A.C. and Cowled, C.J. (2012), "Correlation-based damage detection for complicated truss bridges using multi-layer genetic algorithm", Adv. Struct. Eng., 15, 693-706. DOI
18	Wang, L., Chan, T.H.T., Thambiratnam, D.P. and Tan, A. (2010), "Damage detection for truss bridge structures using correlation-based structural modal strain energy", Proceedings of the 8th International Conference on Short and Medium Span Bridges, Niagara Falls, Canada, August.
19	Wang, S. (2013), "Iterative modal strain energy method for damage severity estimation using frequency measurements", Struct. Control Hlth. Monit., 20, 230-240. DOI
20	Wu, H.S. and Sun, L.M. (2011), "Comparison and improvements of two damage identification methods based on modal strain energy", Proceedings of the Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, USA, April.
21	Yan, W.J., Ren, W.X. and Huang, T.L. (2012), "Statistic structural damage detection based on the closed-form of element modal strain energy sensitivity", Mech. Syst. Signal Pr., 28, 183-194. DOI
22	Yan, Y.J., Yang, H.F., Wu Z.Y. and Ge, X. (2010), "Damage detection method for composite structures based on a combined technique of cross modal strain energy and niche genetic algorithms", J. Vib. Cont., 16(11), 1673-1683. DOI

	A.H. Hadjian Shahri. (2017) Journal of Sound and Vibration Damage detection via closed-form sensitivity matrix of modal kinetic energy change ratio / 401 , 268
13	Zhong-Rong Lu. (2017) International Journal for Numerical Methods in Engineering An enhanced response sensitivity approach for structural damage identification: convergence and performance / 111 (13) , 1231
	Parviz Moradipour. (2017) Procedia Engineering Benchmark Studies for Bridge Health Monitoring Using an Improved Modal Strain Energy Method / 188 , 194
1	Regina Sampaio. (2015) Structural Monitoring and Maintenance Modal parameters identification of heavy-haul railway RC bridges - experience acquired / 2 (1) , 1
5	A. C. Neves. (2017) Journal of Civil Structural Health Monitoring Structural health monitoring of bridges: a model-free ANN-based approach to damage detection / 7 (5) , 689
6	Shaoqing Wu. (2017) Advances in Structural Engineering Reformulation of elemental modal strain energy method based on strain modes for structural damage detection / 20 (6) , 896
3	Ke Ke. (2016) Steel and Composite Structures Energy-factor-based damage-control evaluation of steel MRF systems with fuses / 22 (3) , 589
15452255	(2018) Structural Control and Health Monitoring Modal-based structural damage identification by minimum constitutive relation error and sparse regularization / (15452255) , e2255
2041-2983	(2018) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Strain modal-based damage identification method and its application to crane girder without original model / (2041-2983) , 095440621876992
12	Mingqiang Xu. (2017) Advances in Mechanical Engineering Cross modal strain energy–based structural damage detection in the presence of noise effects / 9 (12) , 168781401774412
9	(2018) Sensors Damage Identification for Underground Structure Based on Frequency Response Function / 18 (9) , 3033
None	(2019) Shock and vibration Mass-Stiffness Combined Perturbation Method for Mode Shape Monitoring of Bridge Structures / 2019 (None) , 1
2	(2017) Advances in materials research : AMR Aluminum and E-glass epoxy plates behavior subjected to shock loading / 6 (2) , 155
2	(2017) Smart structures and systems Mode identifiability of a cable-stayed bridge using modal contribution index / 20 (2) , 115
2	(2018) Journal of vibroengineering On crack detection in curved beams using change of natural frequency / 20 (2) , 881
3	(2015) International journal of intelligent robotics and applications Survey and study on intelligent monitoring and health management for large civil structure / 3 (3) , 239
1	(2020) Smart structures and systems A modified index for damage detection of structures using improved reduction system method / 25 (1) , 1
2	(2015) Structural monitoring and maintenance Damage identification of structures by reduction of dynamic matrices using the modified modal strain energy method / 7 (2) , 125
11	(2015) Journal of structural engineering Modal Strain Energy-Based Model Updating Method for Damage Identification on Beam-Like Structures / 146 (11) , 04020246
1	(2015) Sensors Structural Health Monitoring in Composite Structures: A Comprehensive Review / 22 (1) , 153