1 |
ACI Committee 318 R (2011), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, MI.
|
2 |
ACI Committee 440.2R (2008), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, Detroit, MI, 76p.
|
3 |
Akbarzadeh Bengar, H. and Maghsoudi, A.A. (2010), "Experimental investigations and verification of debonding strain of RHSC continuous beams strengthened in flexure with externally bonded FRPs", Mater. Struct., 43, 815-837.
DOI
|
4 |
Akbarzadeh, H. and Maghsoudi, A.A. (2010), "Experimental and analytical investigation of reinforced high strength concrete continuous Beams strengthened with fibre reinforced polymer", Mater. Des., 31, 1130- 1147.
DOI
|
5 |
ASTM 370A (2012), Standard Test Methods and Definitions for Mechanical Testing of Steel Products, American society for testing and materials (ASTM), West Conshohocken, USA.
|
6 |
Bank, L.C. and Arora, D. (2006), "Analysis of RC beams strengthened with mechanically fastened FRP (MF-FRP) strips", Compos. Struct., 79, 180-191.
|
7 |
Brena, S.F., Bramblett, R.M., Wood, S. and Kreger, M. (2003), "Increasing flexural capacity of reinforced concrete beams using carbon fiber-reinforced polymer composites", ACI Struct. J., 100(1), 36-46.
|
8 |
BS 8110 (1997), Structural Use of Concrete, Part 1, British Standards Institution, Milton Keynes, UK.
|
9 |
BS EN 12390-3 (2009), Testing hardened concrete. Compressive strength of test specimens, British standards institution, Milton Keynes, UK.
|
10 |
Chahrour, A. and Soudki, K. (2005), "Flexural response of reinforced concrete beams strengthened with end-anchored partially bonded carbon fiber-reinforced polymer strips", J. Compos. Constr., ASCE, 9(2), 170-177.
DOI
|
11 |
Chakrabari, P.R. (2005), "Behavior of un-bonded post-tensioned beams repaired and retrofitted with composite materials", ASCE Structures Congress, Metropolis and Beyond, NY, April.
|
12 |
El-Meski, F. and Harajli, M. (2012), "Flexural behavior of unbonded post-tensioned concrete members strengthened using external frp composites", J. Compos. Constr., ASCE, 17(2), 197-207.
|
13 |
El-Refaie, S.A., Ashour, A.F. and Garrity, S.W. (2003), "Sagging and hogging strengthening of continuous reinforced concrete beams using carbon fiber-reinforced polymer sheets", ACI Struct. J., 100(4), 446-453.
|
14 |
Farahbod, F. and Mostofinejad, D. (2010), "Experimental study of moment redistribution in RC frames strengthened with CFRP sheets", Compos. Struct., 93, 1168-1177.
|
15 |
Foret, G. and Limam, O. (2008), "Experimental and numerical analysis of RC two-way slabs strengthened with NSM CFRP rods", Constr. Build. Mater., 22, 2025-2030.
DOI
|
16 |
Garden, H.N. and Hollaway, L.C. (1998), "An experimental study of the influence of plate endanchorage of carbon fibre composite plates used to strengthen reinforced concrete beams", Compos. Struct., 42, 175-188.
DOI
|
17 |
Ghasemi S. (2012), "Behavior of continuous un-bounded post-tensioned concrete members strengthened with cfrp laminates (Experimental Investigation)", MSc Dissertation, Shahid Bahonar University of Kerman, Kerman, Iran.
|
18 |
Lamanna, A.J., Bank, L.C. and Scott, D.W. (2001), "Flexural strengthening of reinforced concrete beams using fasteners and fiber-reinforced polymer strips", ACI Struct. J., 98(3), 368-376.
|
19 |
Iranian concrete code (Mabhas 9) (2009), Design and Construction of Reinforced Concrete Buildings, National Building Codes, Tehran, Iran.
|
20 |
Klaiber F.W. and Wipf T.J. (2003), "Repair of damaged prestressed concrete bridges using CFRP", Proceeding of M.C.T.R. Symposium, Ames, Iowa State University.
|
21 |
Lignola, G.P., Prota, A., Manfredi, G. and Cosenza, E. (2007), "Experimental performance of RC hollow columns confined with CFRP", J. Compos. Constr., ASCE, 11(1), 42-49.
DOI
ScienceOn
|
22 |
Meier, U., Deuring, M., Meier, H. and Schwegler, G. (1993), Strengthening of Structures with Advanced Composites, Alternative Materials for Reinforcement and Prestressing of Concrete, Clarke/Chapman & Hall, Glasgow, Scotland.
|
23 |
Mirmiran, A., Shahawy, M., Nanni, A. and Karbhari, V. (2004), "Bonded repair and retrofit of concrete structures using FRP composites", National Cooperative Highway Research Program (NCHRP) Report 514, Transportation Research Board.
|
24 |
Pellegrino, C. and Modena, C. (2009), "Flexural strengthening of real-scale rc beams with end-anchored pretensioned frp laminates", ACI Struct. J., 106(3), 319-328.
|
25 |
Rosenboom, O., Hassan, T.K. and Rizkalla, S. (2007), "Flexural behavior of aged prestressed concrete girders strengthened with various FRP systems", Constr. Build. Mater., 21, 764-776.
DOI
|
26 |
Rosenboom, O., Walter, C. and Rizkalla, S. (2009), "Strengthening of prestressed concrete girders with composites: Installation, design and inspection", Constr. Build. Mater., 23, 1495-1507.
DOI
|
27 |
Warwaruk, J., Sozen, M.A. and Siess, C.P. (1962), "Investigation of prestressed concrete for highway bridges, part III: strength and behavior in flexure of prestressed beams", Bulletin No. 464, Engineering Experiment Station, University of Illinois, Urbana.
|
28 |
Schiebel, S., Parretti, R. and Nanni, A. (2001), "Repair and strengthening of impacted PC girders on bridge A4845", Missouri Department of Transportation Report RDT01-017/RI01-016.
|
29 |
Takacs, P.F. and Kanstad, T. (2002), "Strengthening prestressed concrete beams with carbon fiber reinforced polymer plates", NTNU Report R-9-00, Norway.
|
30 |
Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. (2002), FRP Strengthened RC Structures, Wiley, New York.
|