1 |
Ait Sghir, K., Randall, B., El Badaoui, M. and Guillet, M. (2007), "Milling cutting tool diagnosis using comparisons of the excitation identified by cepstral techniques", 5th Australasian Congress on Applied Mechanics.
|
2 |
Asmussen JC. (1996), Estimation of correlation functions by random decrement. Proceedings of the ISMA21- Noise and Vibration Engineering II: 1215-1224.
|
3 |
Asmussen, J.C. (1997), Modal analysis based on the random decrement technique - applications to civil engineering structures, Aalborg University, Denmark.
|
4 |
Bedewi NE and Kung DN. (1997), Effect of fatigue loading on the modal properties of composite structures and its utilization for prediction of residual life. Composite Structures 37: 357-371.
DOI
|
5 |
Branch NA, Arakere NK, Svendsen V, et al. (2010), "Stress field evolution in a ball bearing raceway fatigue spall", J. ASTM Int., 7(2), 57-80.
|
6 |
Cesnik, M., Slavic, J. and Boltezar, M. (2012), "Uninterrupted and accelerated vibrational fatigue testing with simultaneous monitoring of the natural frequency and damping", J. Sound Vib., 331, 5370-5382.
DOI
|
7 |
Christophe, J. (2001), Limite d'endurance et duree de vie en fatigue de roulement du 32CrMoV13 nitrure en presence d'indentations, L'institut National des Sciences Appliquees de Lyon.
|
8 |
Colakoglu, M. (2003), "Description of fatigue damage using a damping monitoring technique", Turk. J. Eng. Envir. Sci., 27, 125-130.
|
9 |
Cole, H.A. (1968), "On-the-line analysis of random vibrations", Structural Dynamics and Materials Conference, Palm Springs, AIAA/ASME 288.
|
10 |
Curadelli, R.O., Riera, J.D., Ambrosini, D. and Amani, M.G. (2008), "Damage detection by means of structural damping identification", Eng. Struct., 30, 3497-3504.
DOI
|
11 |
da Mota, V.M.M.B., Moreira, P.M.G.P. and Ferreira, L.A.A. (2008), "A study on the effects of dented surfaces on rolling contact fatigue", Int. J. Fatigue., 30, 1997-2008.
DOI
|
12 |
Doebling, S.W. and Laboratory, L.A.N. (1996), Damage Identification and Health Monitoring of Structural and Mechanical Systems from Changes in Their Vibration Characteristics: A Literature Review, Los Alamos National Laboratory.
|
13 |
GuoB (2007), Identification simultanee des parametres de rigidite et d'amortissement de plaques isotropes minces en vibration par la methode des champs virtuels, L'ecole Nationale Superieure d'Arts et Metiers.
|
14 |
Sadeghi, F., Jalalahmadi, B., Slack, T.S., Raje, N. and Arakere, N.K. (2009), "A review of rolling contact fatigue", J. Tribology., 131, 401-403.
|
15 |
Mazurek, D.F. and DeWolf, J.T. (1990), "Experimental study of bridge monitoring technique", J. Struct. Eng., 116, 2532-2549.
DOI
|
16 |
Gilchrist, M.D., Dulieu-Barton, J.M. and Worden, K. (1999), "Damage localization in reinforced concrete structures by using damping measurements", Key Eng. Mater., 132-141, 167-168.
DOI
|
17 |
Rosado, L., Forster, N.H., Thompson, K.L. and Cooke, J.W. (2010), "Rolling contact fatigue life and spall propagation of AISI M50, M50NiL, and AISI 52100, Part I: experimental results", Tribology Tran., 53, 29-41.
|
18 |
Salawu, O.S. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19, 718-723.
DOI
|
19 |
Voskamp, A.P. amd Mittemeijer, E.J. (1997), The effect of the changing microstructure on the fatigue behaviour during cyclic rolling contact loading, Allemagne, Hanser, Munchen.
|
20 |
Vu, V.H., Thomas, M., Lakis, A.A. and Marcouiller, L. (2011), "Operational modal analysis by updating autoregressive model", Mech. Syst. Signal Pr., 25, 1028-1044.
DOI
|
21 |
Yan, Y.J., Cheng, L., Wu, Z.Y. and Yam, L.H. (2007), "Development in vibration-based structural damage detection technique", Mech. Syst. Signal Pr., 21, 2198-2211.
DOI
|