1 |
Yau, J., Wang, S. and Corten, H. (1980), "A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity", J. Appl. Mech., 47(2), 335-341.
DOI
|
2 |
Sun, C.T. and Klug, J.A. (1996), "Analysis of cracked aluminum plates repaired with bonded composite patches", AIAA J., 34(2), 369-374.
DOI
|
3 |
Yala, A.A. and Megueni, A. (2009), "Optimization of composite patches repairs with the design of experiments method", Mater. Des., 30(1), 200-205.
DOI
ScienceOn
|
4 |
Megueni, A., Bouiadjra, B. and Boutabout, B. (2003), "Computation of the stress intensity factor for patched crack with bonded composite repair in pure mode II", Compos. Struct., 59(3), 415-418.
DOI
ScienceOn
|
5 |
Megueni, A. and Lousdad, A. (2008), "Comparison of symmetrical double sided and stepped patches for repairing cracked metallic structures", Compos. Struct., 85(1), 91-94.
DOI
ScienceOn
|
6 |
Menouillard, T., Elguedj, T. and Combescure, A. (2006), "Mixed-mode stress intensity factors for graded materials", Int. J. Solid. Struct., 43(7-8), 1946-1959.
DOI
|
7 |
Okafor, A.C., Singh, N., Enemuoh, U.E. and Rao, S.V. (2005), "Design, analysis and performance of adhesively bonded composite patch repair of cracked aluminum aircraft panels", Compos. Struct., 71(2), 258-270.
DOI
|
8 |
Moes, N., Dolbow, J. and Belytschko, T. (1999), "A finite element method for crack growth without remeshing", Int. J. Numer. Meth. Eng., 46(1), 131-150.
DOI
|
9 |
Moran, B. and Shih, C. (1987), "Crack tip and associated domain integrals from momentum and energy balance", Eng. Fract. Mech., 27(6), 615-641.
DOI
ScienceOn
|
10 |
Ouinas, D., Bouiadjra, B.B., Serier, B. and SaidBekkouche, M. (2007), "Comparison of the effectiveness of boron/epoxy and graphite/epoxy patches for repaired cracks emanating from a semicircular notch edge", Compos. Struct., 80(4), 514-522.
DOI
ScienceOn
|
11 |
Ouinas, D., Hebbar, A., Bouiadjra, B.B., Belhouari, M. and Serier, B. (2009), "Numerical analysis of the stress intensity factors for repaired cracks from a notch with bonded composite semicircular patch", Compos. Part. B: Eng., 40(8), 804-810.
DOI
ScienceOn
|
12 |
Ouinas, D. and Bouiadjra, B., Achour T, Benderdouche N. (2010), "Influence of disbond on notch crack behaviour in single bonded lap joints", Mater. Des., 31(9), 4356-4362.
DOI
ScienceOn
|
13 |
Pais, M.J., and Kim, N.H. (2009), "Modeling Failure in Composite Materials with the Extended Finite Element and Level Set Methods", 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, California.
|
14 |
Ratwani, M.M. (1977), Characterization of fatigue crack growth in bonded structures. Volume II: Analysis of cracked bonded structures, AFFDL-TR-77-31, Air force flight dynamics laboratory, Ohio, U.S.
|
15 |
Sukumar, N., Moes, N., Moran, B. and Belytschko, T. (2000), "Extended finite element method for threedimensional crack modeling", Int. Numer. Meth. Eng., 48(11), 1549-1570.
DOI
|
16 |
Rose, L.R.F. (1987), "Crack reinforcement by distributed springs", J. Mech. Phys. Solid., 35, 383-405.
DOI
ScienceOn
|
17 |
Sih, G.C. (1973), Handbook of Stress Intensity Factors, Institute of Fracture and Solid Mechanics, Lehigh University, Bethleham, PA.
|
18 |
Callinan, R.J., Rose, L.R.F. and Wang, C.H. (1997), "Three dimensional stress analysis of crack patching", Proceedings of International Conference on Fracture, ICF-9, 2151-2158.
|
19 |
Bouiadjra, B., Oudad, W., Albedah, A., Benyahia, F. and Belhouari, M. (2012), "Effects of the adhesive disband on the performances of bonded composite repairs in aircraft structures", Mater. Des., 37, 89-95.
DOI
ScienceOn
|
20 |
Belytschko, T. and Black, T. (1999), "Elastic crack growth in finite elements with minimal remeshing", Int. J. Numer. Meth. Eng., 45(5), 601-620.
DOI
|
21 |
Dolbow, J. (1999), "An extended finite element with discontinuous enrichment", Ph.D. Dissertation, Northwestern University, USA.
|
22 |
Duarte, C., Hamzeh, O., Liszka, T. and Tworzyd, W. (2001), "A generalized finite element method for the simulation of three-dimensional dynamic crack propagation", Comp. Meth. Appl. Mech. Eng., 190, 227-262.
|
23 |
Giner, E., Sukumar, N., Tarancon, J.E. and Fuenmayor, F.J. (2009), "An ABAQUS implementation of the extended finite element method", Eng. Fract. Mech., 76(3), 347-368.
DOI
ScienceOn
|
24 |
Jones, R. and Chui, W.K. (1999), "Composite repairs to cracks in thick metallic components", Compos. Struct., 4(1), 17-29.
|
25 |
Gu, L., Kasavajhala, A.R.M. and Zhao, Sh. (2011), "Finite element analysis of cracks in aging aircraft structures with bonded composite-patch repairs", Compos. Part B: Eng., 42(3), 505-510.
DOI
ScienceOn
|
26 |
Jones, R., Davis, M.J., Callinan, R.J. and Mallinson, G.D. (1982), "Crack patching analysis and design", J. Struct. Mech., 10(2), 177-190.
DOI
ScienceOn
|
27 |
Jones, R. (1984), "Bonded repair of damage", J. Aero. Soc. India, 36(3), 193-201.
|
28 |
Kaddouri, K., Ouinas, D. and Bouiadjra, B.B. (2008), "FE analysis of the behaviour of octagonal bonded composite repair in aircraft structures", Comput. Mater. Sci., 43(4), 1109-1111.
DOI
|
29 |
Marioli-Riga, Z., Xenos, D. and Vrettos, C.A. (2004), "Standard analysis methodology for the stress analysis of repaired aircraft structures with the method of composite patch repair", Appl. Comp. Mater., 11(4), 191-203.
DOI
ScienceOn
|
30 |
Kasavajhala, A.R.M. and Gu, L. (2011), "Fracture analysis of Kevlar-49/epoxy and e-glass/epoxy doublers for reinforcement of cracked aluminum plates", Compos. Struct., 93(8), 2090-2095.
DOI
ScienceOn
|
31 |
Liu, X.Y., Xiao, Q.Z. and Karihaloo, B.L. (2004), "XFEM for direct evaluation of mixed mode SIFs in homogeneous and bi-materials", Int. J. Numer. Meth. Eng., 59(8), 1103-1118.
DOI
ScienceOn
|
32 |
Madani, K., Touzain, S., Feaugas, X., Benguediab, M. and Ratwani, M. (2008), "Numerical analysis for the determination of the stress intensity factors and crack opening displacements in plates repaired with single and double composite patches", Comput. Mater. Sci., 42(3), 385-393.
|
33 |
Baker, A.A. (1987), "A summary of work on applications of advanced fibre composites at the Aeronautical Research Laboratories", Composites, 9(1), 11-16.
|
34 |
Ayatollahi, M.R. and Hashemi, R. (2007), "Computation of stress intensity factors (KI, KII) and T-stress for cracks reinforced by composite patching", Compos. Struct., 78(4), 602-609.
DOI
ScienceOn
|
35 |
Baker, A.A., Callinan, R.J., Davis, M.J., Jones, R. and Williams, J.G. (1984), "Repair of mirage III aircraft using the BFRP crack-patching technique", Theor. Appl. Fract. Mech., 2(1), 1-15.
DOI
ScienceOn
|
36 |
Baker, A.A. (1984), "Repair of cracked or defective metallic components with advanced fibre composites: an overview of Australian work", Compos. Struct., 2(2), 153-181.
DOI
ScienceOn
|
37 |
Baker, A.A. and Jones, R. (1988), Bonded Repair of Aircraft Structures, Martinus Nijhoff, Dordrecht.
|
38 |
Baker, A.A. and Chester, R.J. (1993), "Recent advances in bonded composite repair technology for metallic aircraft components", Proceeding of the International Conference on Advanced Composite Materials, 45-49.
|
39 |
Baker, A.A. (1996), "Fatigue studies related to the certification of composite crack patching for primary metallic aircraft structure", Presented at FAA-NASA Symposium on Continued Airworthiness of Aircraft Structures, Atlanta.
|
40 |
Baker, A.A. (1997a), "On the certification of bonded composite repairs primary aircraft structures", Proceeding of the Eleventh International of Composite Materials (ICCM-11), Gold Coast, Australia.
|
41 |
Baker, A.A. (1997b), Joining and Repair of Aircraft Composite Structures, Ed. Mallick, P.K., Part 14, Composite engineering handbook, Marcel Decker Inc., New York.
|
42 |
Albedah, A., Bouiadjra, B.B., Mhamdia, R., Benyahia, F. and Es-Saheb, M. (2011), "Comparison between double and single sided bonded composite repair with circular shape", Mater. Des., 32(2), 996-1000.
DOI
ScienceOn
|
43 |
Bouiadjra, B., Belhouari, M. and Serier, B. (2002), "Computation of the stress intensity factors for repaired cracks with bonded composite patch in mode I and mixed mode", Compos. Struct., 56(4), 401-406.
DOI
ScienceOn
|
44 |
Belhouari, M., Bouiadjra, B., Megueni, A. and Kaddouri, K. (2004), "Comparison of double and single bonded repairs to symmetric composite structures: a numerical analysis", Compos. Struct., 65(1), 47-53.
DOI
ScienceOn
|
45 |
ABAQUS/CAE Ver 6.10 (2010), User's Manual, Hibbitt, Karlsson & Sorensen, Inc.
|
46 |
Bouiadjra, B.B., Fekirini, H., Belhouari, M. and Serier, B. (2008), "Numerical analysis of the behavior of repaired inclined cracks with bonded composite patch having two adhesive bands in aircraft structures", Proceedings of the Institution of Mechanical Engineers Part G. J. Aerospace Eng., 222(7), 963-968.
|
47 |
Daux, C., Moes, N., Dolbow, J., Sukumar, N. and Belytschko, T. (2000), "Arbitrary branched and intersecting cracks with the extended finite element method", Int. Numer. Meth. Eng., 48(12), 1741-1760.
DOI
|
48 |
Xiao, Q.Z. and Karihaloo, B.L. (2003), "Direct evaluation of accurate coefficients of the linear elastic crack tip asymptotic field", Fatigue Fract. Eng. Mater. Struct., 26(8), 719-729.
DOI
ScienceOn
|
49 |
Nagashima, T., Omoto, T. and Tani, S. (2003), "Stress intensity factor analysis of interface cracks using XFEM", Int. J. Numer. Meth. Eng., 56(8), 1151-1173.
DOI
ScienceOn
|
50 |
Ouinas, D., Bouiadjra, B.B., Achour, B. and Benderdouche, N. (2009), "Modelling of a cracked aluminium plate repaired with composite octagonal patch in mode I and mixed mode", Mater. Des., 30(3), 590-595.
DOI
ScienceOn
|
51 |
Arenas, J.M., Narbon, J.J. and Alia, C. (2010), "Optimum adhesive thickness in structural adhesive joints using statistical techniques based on weibull distribution", Int. J. Adhes. Adhes., 30(3), 160-165.
DOI
ScienceOn
|