Browse > Article
http://dx.doi.org/10.12989/sem.2014.49.3.395

Horizontal stiffness solutions for unbonded fiber reinforced elastomeric bearings  

Toopchi-Nezhad, H. (Department of Civil Engineering, Razi University)
Publication Information
Structural Engineering and Mechanics / v.49, no.3, 2014 , pp. 395-410 More about this Journal
Abstract
Fiber Reinforced Elastomeric Bearings (FREBs) are a relatively new type of laminated bearings that can be used as seismic/vibration isolators or bridge bearings. In an unbonded (U)-FREB, the bearing is placed between the top and bottom supports with no bonding or fastening provided at its contact surfaces. Under shear loads the top and bottom faces of a U-FREB roll off the contact supports and the bearing exhibits rollover deformation. As a result of rollover deformation, the horizontal response characteristics of U-FREBs are significantly different than conventional elastomeric bearings that are employed in bonded application. Current literature lacks an efficient analytical horizontal stiffness solution for this type of bearings. This paper presents two simplified analytical models for horizontal stiffness evaluation of U-FREBs. Both models assume that the resistance to shear loads is only provided by an effective region of the bearing that sustains significant shear strains. The presented models are different in the way they relate this effective region to the horizontal bearing displacements. In comparison with experimental results and finite element analyses, the analytical models that are presented in this paper are found to be sufficiently accurate to be used in the preliminary design of U-FREBs.
Keywords
fiber reinforced elastomeric bearing; preliminary design; horizontal stiffness; seismic isolator; vibration isolator; bridge bearing; unbonded application;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Toopchi-Nezhad, H., Tait, M.J. and Drysdale, R.G. (2008), "Testing and modeling of square carbon fiber-reinforced elastomeric seismic isolators", Struct. Contrl. Health Monit., 15(6), 876-900.   DOI   ScienceOn
2 Toopchi-Nezhad, H., Tait, M.J. and Drysdale, R.G. (2009), "Shake table study on an ordinary low-rise building seismically isolated with SU-FREIs (stable unbonded fiber-reinforced elastomeric isolators)", Earthq. Eng. Struct. Dyn., 38(11), 1335-57.   DOI
3 Toopchi-Nezhad, H., Tait, M.J. and Drysdale, R.G. (2011), "Bonded versus unbonded strip fiber reinforced elastomeric isolators: finite element analysis", Compos. Struct., 93, 850-859.   DOI
4 Toopchi-Nezhad, H., Tait, M.J., and Drysdale, R.G. (2013), "Influence of thickness of individual elastomer layers (1st shape factor) on the response of unbonded fiber reinforced elastomeric bearings", J. Compos. Mater., 47(27), 3433-3450.   DOI
5 Tsai, H.C. and Kelly, J.M. (2005a), "Buckling of short beams with warping effect included", Int. J. Solids Struct., 42(1), 239-53.   DOI   ScienceOn
6 Tsai, H.C. and Kelly, J.M. (2005b), "Buckling load of seismic isolators affected by flexibility of reinforcement" Int. J. Solids Struct., 42(1), 255-69.   DOI   ScienceOn
7 ASCE/SEI 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, Virginia.
8 Dehghani Ashkezaria, G., Aghakouchak, A.A. and Kokabib, M. (2008), "Design, manufacturing and evaluation of the performance of steel like fiber reinforced elastomeric seismic isolators", J. Mater. Process. Tech., 197, 140-150.   DOI
9 Gerhaher, U., Strauss, A. and Bergmeister, K. (2011), "Numerical modeling of elastomeric bearings in structural engineering", Adv. Mater. Sci., 3(29), 51-63.
10 Kelly, J.M. (2002), "Seismic isolation systems for developing countries", Earthq. Spectra, 18(3), 385-406.   DOI   ScienceOn
11 Kelly, J.M. and Konstantinidis, D. (2007), "Low-cost seismic isolators for housing in highly-seismic developing countries", Proceedings of 10th World Conference on Seismic Isolation, Energy Dissipation and Active Vibrations Control of Structures, Istanbul, Turkey.
12 Kelly, J.M. (2007), Earthquake-Resistant Design with Rubber, 2nd Edition, Springer, London.
13 Khanlari, S., Dehghani Ashkezari, G., Kokabi, M. and Razzaghi Kashani, M. (2010), "Fiber-reinforced nanocomposite seismic isolators: design and manufacturing", Polymer Compos., 31(2), 299-306.
14 Mishra, H.K. and Igarashi, A. (2012), "Experimental and analytical study of scrap tire rubber pad for seismic isolation", World Acad. S., Eng. and Technol., 62, 202-208.
15 Mordini, A. and Strauss, A. (2008), "An innovative earthquake isolation system using fiber reinforced rubber bearings", Eng. Struct., 30(10), 2739-51.   DOI   ScienceOn
16 Mullins, L. (1969), "Softening of rubber by deformation", Rubber Chem. Technol., 42, 339-62.   DOI