1 |
Chakherlou, T.N. and Vogwell, J. (2003), "The effect of cold expansion on improving the fatigue life of fastener holes", Eng. Fail. Anal., 10, 13-24.
DOI
ScienceOn
|
2 |
Chandawanich, N. and Sharpe, Jr. W.N. (1979), "An experimental study of fatigue crack initiation and growth from cold worked holes", Eng. Fract. Mech., 11, 609-620.
DOI
ScienceOn
|
3 |
Chobin, M., Anggit, M., Kazuo, K., Yoshiki, I. and Akihide, S. (2009), "Crack growth arrest by redirecting crack growth by drilling stop holes and inserting pins into them", Eng. Fail. Anal., 16, 475-483.
DOI
ScienceOn
|
4 |
De Matos, P.F.P., Moreira, P.M.G.P., Nedbal, I. and de Castro, P.M.S.T. (2005), "Reconstitution of fatigue crack growth in Al-alloy 2024-T3 open-hole specimens using microfractographic techniques", Eng. Fract. Mech., 72, 2232-2246.
DOI
ScienceOn
|
5 |
Fukuda, S. and Tsuruta, Y. (1978), "An experimental study of redistribution of welding residual stress", Trans. JWRI, 7, 67-72.
|
6 |
Gopalakrishna, H.D., Narasimha, M.H.N., Krishna, M., Vinod, M.S. and Suresh, A.V. (2010), "Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al2024T3 alloy-an experimental study", Eng. Fail. Anal., 17, 361-368.
DOI
ScienceOn
|
7 |
Keith, W.J. and Martin, L.D. (2009), "Predicting fatigue crack growth from a pre-yielded hole", Int. J. Fatigue, 31, 223-230.
DOI
ScienceOn
|
8 |
Kusko, C.S., DuPont, J.N. and Marder, A.R. (2004), "Influence of stress ratio on fatigue crack propagation behaviour of stainless steel welds", Weld. J., 83, 59-64.
|
9 |
Kujawski, D. (2001), "Enhanced model of partial crack closure for correlation of R-ratio effects in aluminum alloys", Int. J. Fatigue, 23, 95-102.
DOI
ScienceOn
|
10 |
Lacarac, V.D., Smith, D.J. and Pavier, M.J. (2001), "The effect of cold expansion on fatigue crack growth from open holes at room and high temperature", Int. J. Fatigue, 23, 161-170.
DOI
ScienceOn
|
11 |
Lam, Y.C and Lian, K.S. (1989), "Effect of residual stress and its redistribution on fatigue crack growth", Theo. Appl. Fract. Mech., 12, 59-66.
DOI
ScienceOn
|
12 |
LaRue, J.E. (2005), "The influence of residual stress on fatigue crack growth", Master Thesis, Mississippi State University.
|
13 |
LaRue, J.E. and Daniewicz, S.R. (2007), "Predicting the effect of residual stress on fatigue crack growth", Int. J. Fatigue, 29, 508-515.
DOI
ScienceOn
|
14 |
Liu, Y.S., Shao, Z.J., Liu, J. and Yue, Z.F. (2010), "Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole", Mater. Des., 31(3), 1208-1215.
DOI
ScienceOn
|
15 |
Man, S. (2005), "Etude de l'influence et de l'optimisation du degre d'expansion à froid dans les mecanismes de reamorcage d'une fissure: Etude numerique et experimentale", Doctoral Thesis, Universite des Sciences et Technologies de Lille.
|
16 |
Newman, J.A. (2000), "The effects of load ratio on threshold fatigue crack growth of aluminum alloys", Doctoral Thesis, Virginia University.
|
17 |
Nigrelli, V. and Pasta, S. (2008), "Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes", J. Mater. Proc. Technol., 205, 290-296
DOI
ScienceOn
|
18 |
Pasta, S. (2007), "Fatigue crack propagation from a cold-worked hole", Eng. Fract. Mech, 74, 1525-1538.
DOI
ScienceOn
|
19 |
Rich, D.L. and Impellizzeri, L.F. (1977), "Fatigue analysis of cold-worked and interference fit fastener holes. Cyclic stress-strain and plastic deformation aspect of fatigue crack growth", Am. Soc. Test Mat., ASTM STP, 637, 153-175.
|
20 |
Ramesh, N. (2005), "Fatigue crack growth under residual stresses around holes", Master Thesis, Mississippi State University.
|
21 |
Stefanescu, D., Santisteban, J.R., Edwards, L. and Fitzpatrick, M.E. (2004), "Residual stress measurement and fatigue crack growth prediction after cold expansion of cracked fastener holes", J. Aerosp. Eng., 17(91), 0893-1321.
|
22 |
Todoroki, A. and Kobayashi, H. (1991), "Prediction of fatigue crack growth rate in residual stress fields", Key Eng. Mat. Fract. Strength, 367, 51-52.
|
23 |
Toparli, M. and Aksoy, T. (1997), "Effect of the residual stresses on the fatigue crack growth behaviour at fastener holes", Mater. Sci. Eng. A, 225, 196-203.
DOI
ScienceOn
|
24 |
Underwood, J.H., Pook, L.P. and Sharples, J.K. (1977), "Flaw growth and fracture", Am. Soc. Test Matm, ASTM STP, 631, 112-120.
|
25 |
Wang, Z. and Zhang, X. (2003), "Predicting fatigue crack growth life for cold-worked holes based on existing closed-form residual stress models", Int. J. Fatigue, 25, 1285-1291.
DOI
ScienceOn
|
26 |
Zhang, X. and Wang, Z. (2003), "Fatigue life improvement in fatigue-aged fastener holes using the cold expansion technique", Int. J. Fatigue, 25, 1249-1257.
DOI
ScienceOn
|
27 |
Bendouba, M., Aid, A., Benhamena, A. and Benguediab, M. (2012), "Effect of hardening induced by cold expansion on damage fatigue accumulation and life assessment of aluminum alloy 6082 T6", Mater. Res., 15(6), 1-5.
DOI
|
28 |
ANSYS (2007), User's Manuals, Revision 11.0.
|
29 |
Amrouche, A., Mesmacque, G., Garcia, S. and Talha, A. (2003), "Cold expansion effect on the initiation and the propagation of the fatigue crack", Int. J. Fatigue, 25, 949-954.
DOI
ScienceOn
|
30 |
Amrouche, A., Su, M., Aid, A. and Mesmacque, G. (2008), "Numerical study of the optimum degree of cold expansion: Application for the pre-cracked specimen with the expanded hole at the crack tip", J. Mater. Proce. Technol., 197, 250-254.
DOI
ScienceOn
|
31 |
Bertrand, J. and Fabrice, C. (2005), "Prevision de la fissuration par fatigue en presence de contraintes residuelles", Mec. Indust., 6, 75-88.
DOI
|