1 |
Senel, S.M. and Palanci, M. (2013), "Structural aspects and seismic performance of 1-story precast buildings in Turkey", J. Perform. Constr. Facil., 27(4), 437-449.
DOI
|
2 |
Sezen, H. and Whittaker, A.S. (2006), "Seismic performance of industrial facilities affected by the 1999 Turkey earthquake", J. Perform. Constr. Facil., 20(1), 28-36.
DOI
ScienceOn
|
3 |
TEC-1998, Turkish Earthquake Code (1998), Specifications for structures to be built in disaster areas, Ministry of Public Works and Settlement, Ankara, Turkey.
|
4 |
TEC-2007, Turkish Earthquake Code (2007), Specifications for structures to be built in seismic areas, Ministry of Public Works and Settlement, Ankara, Turkey.
|
5 |
Tezcan, S.S. and Colakoglu, H.K. (2003), "Weak points of the TEC-98 precast building code provisions", Fifth National Conference on Earthquake Engineering, Istanbul, Turkey. (in Turkish)
|
6 |
Zorbozan, M., Barka, G. and Sarifakioglu, F. (1998), "Observed precast building damages in Ceyhan earthquake, reasons and solutions", Concrete and Prefabrication, 48, 20-24. (in Turkish)
|
7 |
Atakoy, H. (2000), "The August 17th Earthquake and the prefabricated structures built by the members of the Prefabric Union", Concrete Prefabrication, 52-53.
|
8 |
Cruz, A.M. and Steinberg, L.J. (2005), "Industry preparedness for earthquakes and earthquake-triggered hazmat accidents in the 1999 Kocaeli earthquake", Earthq. Spectra, 21(2), 285-304.
|
9 |
Ersoy, U., Tankut, T. and Ozcebe, G. (1995), Earthquake Behavior of Precast Building Connections, The Scientific and Technological Research Council of Turkey, Ankara. (in Turkish)
|
10 |
Adalier, K. and Aydingun, O. (2001), "Structural engineering aspects of the June 27, 1998 Adana-Ceyhan (Turkey) earthquake", Eng. Struct., 23(4), 343-355.
DOI
ScienceOn
|
11 |
Arslan, M.H., Korkmaz, H.H. and Gulay, F.G. (2006), "Damage and failure pattern of prefabricated structures after major earthquakes in Turkey and shortfalls of the turkish earthquake code", Eng. Fail. Anal., 13(4), 537-557.
DOI
ScienceOn
|
12 |
Ersoy, U., Ozcebe, G. and Tankut, T. (2000), "Observed precast building damages in 1999 Marmara and Duzce earthquakes", 10th Prefabrication Symposium, Istanbul. (in Turkish)
|
13 |
FEMA 450 (2003), NEHRP Recommended Provisions for Seismic Regulations of New Buildings and Other Structures, Part 1: Provisions, NIBS, Washington, USA.
|
14 |
Fischinger, M., Kramar, M. and Isakovic, T. (2008), "Cyclic response of slender RC columns typical of precast industrial buildings", B. Earthq. Eng., 6, 519-34.
DOI
ScienceOn
|
15 |
Karaesmen, E. (2001), Prefabrication in Turkey: Facts and Figures, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey.
|
16 |
Kayhan, A.H. (2004), "A rapid evaluation method for determining seismic performance of precast industrial buildings", M.S. Thesis, Pamukkale University, Denizli.
|
17 |
Kilincarslan, N. and Kilincarslan, E. (2008), Geological and Geotechnical Investigation of Denizli Organized Industrial Zone, Zemin Muhendislik Ltd. Comp., Denizli. (in Turkish)
|
18 |
Palanci, M. (2010), "Seismic performance estimation of existing industrial precast structures based on building inventories", M.S. Thesis, Pamukkale University, Denizli.
|
19 |
Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", J. Struct. Div., ASCE, 108(ST4), 929-950.
|
20 |
Posada, M. and Wood, S.L. (2002), "Seismic performance of precast industrial buildings in Turkey", 7th National Conference on Earthquake Engineering (7NCEE), Boston, USA.
|
21 |
Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
|
22 |
Saatcioglu, M., Mitchell, D., Tinawi, R., Gardner, N.J., Gillies, A.G., Ghobarah, A., Anderson, D.L. and Lau, D. (2001), "The August 17, 1999 Kocaeli (Turkey) earthquake-damage to structures", Can. J. Civil Eng., 28(4), 715-737.
|