1 |
Aronson, A.Ya., Bazhenov, V.A., Gotsulyak, E.A., Gulyaev, V.I. and Ogloblya, A.I. (1985), "Nonlinear deformation of shells of the volute chambers of hydraulic turbines in an elastic medium", Strength Mater., 17(4), 555-560.
DOI
ScienceOn
|
2 |
Cui, J.H. and Su, H.D. (2007), "3-D FEM emulation computation on surrounding concrete of steel spiral case keeping internal pressure during construction", Proceedings of International Symposium on Computational Mechanics, Beijing, China, July.
|
3 |
Fischer, F., Lim, G.T., Handge, U.A. and Altstdt, V. (2009), "Numerical simulation of mechanical properties of cellular materials using computed tomography analysis", J. Cell. Plast., 45(5), 441-460.
DOI
ScienceOn
|
4 |
Gan, Q.M. (2010), "Characteristic and influence factors analysis of compression modulus of polyurethane cork cushion material", Water Power, 36(5), 82-84. (in Chinese)
|
5 |
Gilchrist, A. and Mills, N.J. (2001), "Impact deformation of rigid polymeric foams: Experiments and FEA modelling", Int. J. Impact Eng., 25(8), 767-786.
DOI
ScienceOn
|
6 |
Hawkins, M.C., O'Toole, B. and Jackovich, D. (2005), "Cell morphology and mechanical properties of rigid polyurethane foam", J. Cell. Plast., 41(3), 267-285.
DOI
ScienceOn
|
7 |
Kalkani, E.C. (1995), "Expected displacements and stresses in the encasing concrete of a Francis turbine scroll case", Comput. Struct., 55(4), 735-739.
DOI
ScienceOn
|
8 |
Krishnaswamy, S. and Beatty, M.F. (2000), "The Mullins effect in compressible solids", Int. J. Eng. Sci., 38(13), 1397-1414.
DOI
ScienceOn
|
9 |
Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900.
DOI
ScienceOn
|
10 |
Lubliner, J., Oliver, J., Oller, S. and Oate, E. (1989), "A plastic-damage model for concrete", Int. J. Solids Struct., 25(3), 299-326.
DOI
ScienceOn
|
11 |
Ma, Z.Y. and Zhang, C.H. (2010), "Static and dynamic damage analysis of mass concrete in hydropower house of Three Gorges Project", Trans. Tianjin Univ., 16(6), 433-440.
DOI
ScienceOn
|
12 |
Mullins, L. (1969), "Softening of rubber by deformation", Rubber Chem. Technol., 42(1), 339-362.
DOI
|
13 |
Ogden, R.W. and Roxburgh, D.G. (1999), "A pseudo-elastic model for the Mullins effect in filled rubber", Proc. R. Soc. Lond. A, 455(1988), 2861-2877.
|
14 |
Rizov, V. (2009), "Indentation of foam-based polymer composite sandwich beams and panels under static loading", J. Mater. Eng. Perform., 18(4), 351-360.
DOI
ScienceOn
|
15 |
Shen, Y., Golnaraghi, F. and Plumtree, A. (2001), "Modelling compressive cyclic stress-strain behaviour of structural foam", Int. J. Fatigue, 23(6), 491-497.
DOI
ScienceOn
|
16 |
Tian, Z.Q., Zhang, Y.L., Ma, Z.Y. and Chen, J. (2008), "Effect of concrete cracks on dynamic characteristics of powerhouse for giant-scale hydrostation", Trans. Tianjin Univ., 14(4), 307-312.
DOI
ScienceOn
|
17 |
U.S. Army Corps of Engineers (1995), EM 1110-2-3001 Planning and Design of Hydroelectric Power Plant Structures, Department of the Army, Washington, DC.
|
18 |
Wu, H.G., Shen, Y. and Jiang, K.C. (2007), "Structural research on embedment of a bare deflated spiral case", Wuhan Univ. J. Natural Sci., 12(2), 311-316.
DOI
ScienceOn
|
19 |
Yu, Y., Zhang, Q.L. and Wu, H.G. (2009), "Reinforcement calculation for spiral case embedded with cushion layer of hydropower station", J. Tianjin Univ. Sci. Tech., 42(8), 673-677. (in Chinese)
|
20 |
Zhang, C.H. and Zhang, Y.L. (2009), "Nonlinear dynamic analysis of the Three Gorge Project powerhouse excited by pressure fluctuation", J. Zhejiang Univ. Sci. A, 10(9), 1231-1240.
DOI
ScienceOn
|
21 |
Zhang, Q.L. and Wu, H.G. (2009), "Modal analysis of hydropower house by using finite element method", Proceedings of 2009 Asia-Pacific Power and Energy Engineering Conference, Wuhan, China, March.
|
22 |
Zhang, Q.L., Wu, H.G. and Yang, H.Q. (2009), "Effect of modeling range on structural analysis for powerhouse of hydroelectric power plant by FEM", Trans. Tianjin Univ., 15(5), 388-392.
DOI
ScienceOn
|